ZENEC ZE-NC2040 User manual

Use/Coverage:
The so called “SyncTool” in combination with the Naviextras Toolbox Software allows to download new map
data, Teleatlas map bugfixes, as well as new add-on’s like speedcams, activation of TMC Pro with a USB stick,
and to transfer the downloaded files to your E>GO unit. Please note that you can find updates that are free of
charge, as well as updates that will have to be paid with a credit card.
Requirements:
1) You need a USB stick of at least 4GB data size (max. 8GB).
Note: The USB stick must be formatted to FAT32 before use (right click on the USB drive in the Win Explorer,
then choose “Format” FAT32).
2) You need the SyncTool software – see the instructions below.
3) You need the Naviextras Toolbox - see the instructions below.
How to use SyncTool / Toolbox:
1) Download the ZIP-file called “SyncTool”.
2) Unzip the file with either WinZIP or the native unpacking software that comes with Windows XP/Vista/Win7.
3) You obtain a folder called “Update”.
WWW.ZENEC.COM
OPERATING INSTRUCTIONS FOR NAVI-UPDATE
(CONTENT & FEATURES) FOR E>GO (ZE-NC2010, ZE-NC2040, ZE-NC5010XX, ZE-NC3810)
1 of 3
Image 1
Image2 Image3

4) Copy the “Update” folder to the root directory of your USB stick which has been formatted to FAT32 file
system before.
5) Connect the USB stick to the media link box of your E>GO in the vehicle.
6) Turn on the E>GO and navigate to the “Setup-Menu” of the E>GO and choose “Misc”. While on
“Misc” go to the second page (press the orange arrow in the right hand corner) to find the option “Navi Update”.
Confirm with “Yes”
7) Follow the instructions that appear on the E>GO screen.
WWW.ZENEC.COM
2 of 3
Image 5
Image 4
Image 6
Image7 Image 8

8) After the SyncTool process has started, read and follow the steps and mind the warnings shown on screen.
9) After the sync process has completed, remove the USB stick.
10) Connect the USB stick with your computer / notebook.
11 ) Start the Naviextras Toolbox service online, after you have created an account and log in was sucessful.
You can now choose among several updates you would like to install on your E>GO. Once the download(s)
have completed, unplug the USB stick. Back in your car, plug the USB stick into the media link box and repeat
steps described under point 6).
WWW.ZENEC.COM
3 of 3
Image 9
Image 11
Image 10