ZENVIDA 295-PUBTBLMC User manual

Product: Zenvida Mid Century Pub Table
SKU: 295-PUBTBLMC
EMAIL: [e-mail]
TEL: [phone]
http://bit.ly/ZENVIDA
EMAIL: [e-mail] WEB: http://bit.ly/ZENVIDA TEL: [phone]
Reaching out via product review, marketplace
email, social media or leaving seller feedback
may cause a delay in response. If you have
questions about this product or need anything,
please contact us. You are our priority!
***WARNING***
Power tools may strip bolts or screws. Hand tighten bolts to only about
75% tight. Do NOT completely tighten any bolt during assembly until all
bolts and washers are connected. Having someone help you may make
assembly easier.

PART LIST HARDWARE LIST
ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
ATABLE TOP 1 PC 1
BCENTER SUPPORT 2
3
8 PCS
CAUTIONS :
1.Do not FULLY-TIGHTEN the nuts or nut bolts until all are in place.
2.To prevent thread damage.Ensure that nuts or nut bolts are not over-tighten.
3.Hardware are to be kept out of reach from children.
ASSEMBLY INSTRUCTIONS
4
Read this instruction carefully. Refer hardware and furniture parts list
for guidance. Be sure all parts are complete, before assembling. Place all
wooden furniture part on a clean and flat soft surface to prevent
scratcheds. Refer steps provided as assembling guide. JCBB SCREW M8 X 70MM
STEP 1
STEP 3
ASSEMBLY COMPLETED
5PAN HEAD SCREW M5 x 32MM
ALLEN KEY M5
SPRING WASHER 5/16"
1 PC
CLEG SUPPORT
STEP 4
FLAT WASHER 5/16"
2 PCS
8 PCS
8 PCS
STEP 2
4x
3
2
1
4
6 PCS
4x
DTABLE LEG (L & R)
D2x 2x
5
5
2x
5
1 PC
4 PCS
REMARK:
HOLE MARKING ALWAYS ON
RIGHT HAND SIDE OF TABLE LEG.
4
2
31
A
B
C
STEP 3.1
STEP 3.2