ZENVIDA 290-HTRECT5PC User manual

Product name: Zenvida 5 Piece Bistro /
Pub Table Set With 4 Stools
SKU: 290-HTRECT5PC
EMAIL: [email protected]
TEL: [phone]
http://bit.ly/ZENVIDA
EMAIL: [email protected] WEB: http://bit.ly/ZENVIDA TEL: [phone]
Reaching out via product review, marketplace
email, social media or leaving seller feedback
may cause a delay in response. If you have
questions about this product or need anything,
please contact us. You are our priority!
***WARNING***
Power tools may strip bolts or screws. Hand tighten bolts to only about
75% tight. Do NOT completely tighten any bolt during assembly until all
bolts are connected.

Product name: Zenvida 5 Piece Bistro /
Pub Table Set With 4 Stools
SKU: 290-HTRECT5PC
EMAIL: [email protected]
TEL: [phone]
http://bit.ly/ZENVIDA
EMAIL: [email protected] WEB: http://bit.ly/ZENVIDA TEL: [phone]
Enclosed parts and hardware see above. **NOTE** Extra hardware included: Part I x5, Part J x2.
Both stools and table are assembled in the same way. Use the larger components for the table, the
small components for the stools. The hardware is the same for table and stools, as is the assembly
process detailed on the next page.
Thank you for your purchase of the
Zenvida 5 Piece Bistro Table Set!
 Ensure all hardware, small parts
and components are present before
beginning assembly. Extra screws
are included.
 Assemble on a soft, smooth surface
to prevent damage to product finish.
 Adult assembly required.
 Assembly and handling may require
two people.
 Estimated assembly time is 45-60
minutes.
 Use the enclosed tools. Use of
power tools for assembly is not
advised. Use care if you use them.
 Do not tighten screws until fully
assembled.
 Do not stand on chairs (or table).
Do not tip or lean chair while
seated. Do not exceed the chair
weight limit of 225 lbs.

Product name: Zenvida 5 Piece Bistro /
Pub Table Set With 4 Stools
SKU: 290-HTRECT5PC
EMAIL: [email protected]
TEL: [phone]
http://bit.ly/ZENVIDA
EMAIL: [email protected] WEB: http://bit.ly/ZENVIDA TEL: [phone]