5
Power on / off
1. To power on t he camer a , hol d and pr ess t he “②”
button for 3 seconds. The yellow led light will come
on after the camera vibrates.
2. To power off the camera , hold and press the “②”
button for 3 seconds. The camera will turn off after
vibrating .
Note:
If NO Memory Card is inserted, the yellow led will keep
flashing . Please insert a memory before operating.
If the inserted memory card is not be detected by the camera,
the yellow led will keep flashing. Please format the inserted
memory card and try operating the camera with the formatted
memory card again.
If a defect or corrupted memory card is inserted, the yellow led
will stay on solid and the camera will not operate normally.
Formatting the memory card can clear any corruption it may
have .
