ZHIKE ZK901 User manual

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Instruction of Robot Vacuum Cleaner
（Please read the instruction carefully before use and keep it well）
Model：ZK901

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Content
Machine and accessories
Product introduction
Product installation
Instruction
Product maintenance
Product parameters
The name and content of hazardous substances in the product
Voice prompts and trouble-shooting
FAQ
Safety information

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Machine and accessories
The following product and accessories will be found after opening the package, please check carefully.
（The following pictures are for your reference, and they are subject to the actual product received。）
Machine
Charging stand
High efficiency filter
Side brush
Power adapter
Instruction
*Cleaning brush
*Dust box
Water tank
Mop component
Single suction
port component
x1
x1
x1
x2
x1
x1
x1
x1
x1
x1
x1
*The accessories are already installed on the machine.
The accessories are optional for the customer.
Side brush Power adapter Instruction
High efficiency filterCharging standMachine

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Product introduction
Keys on the machine
Power key：
*Short press: Sweep/pause
*Long press: On/off the machine
Color of power indication light:
*White: Power ≥20%
*Red: Power ≤20%
*Breathing light flashing: Charging
*Red quick flashing: Faulty
WiFi indication light：
*Slow flash: Waiting for connection
*Normally on: WiFi is connected
*Quick flash: WiFi connection failed
Recharge key：
*Short press: recharge / pause
*Long press: Timing cleaning

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Product introduction
Front of machine Rear of machine
Laser radar
Radar collision sensor
Exhaust port
Side brush
Side brush
Rolling brush
Rolling brush cover
Mop component
Mop buckle
Driving wheel
Universal wheel
Alignment sensor
Collision sensor
Infrared sensor
Cover
Charging pole piece
Anti-dropping sensor

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Product introduction
Machine Dust box
Dust box buckle
Cleaning brush
Machine cover
Reset key
Wall sensor
Filter bracket
High efficiency filter
Primary filter

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Product introduction
Water tank
Suction port component
Mop
*The components on this page are optional and that can
be configured based on different demand of customers.
Sealing plug
Water tank buckle
Charged pole piece
Buckle
Suction port
Fixed buckle
Water inlet for mop
Mop buckle

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Product installation
01. Charging stand
Take the charging stand out from the package.
03.Charge the robot vacuum cleaner on
the charging stand
04.Install the mobile client to bind the robot
vacuum cleaner
05.Start cleaning
Signal indication light
Power interface
Charging terminal
02. Place the charging stand against the wall
and connect the power supply
Over 1m
Over 1m
Over 2m
Color of power indication light
*White: Power ≥20%
*Red: Power ≤20%
*Breathing light flashing: Charging
*Red quick flashing: Faulty
*Please remove the plastic film on the silicone pad at the
bottom of the charging stand and place it against the wall
and stick it firmly.
*Please make sure that no obstacles in the space of 1 m on
both sides and 2m ahead of the charging stand.
*During the charging of the robot vacuum cleaner on
the charging stand, it will automatically turn on.
*Please scan the QR code below to download and
install the mobile client. For details, please refer to the
APP Operation Guide.
*Short press the power key or use the APP to start the
cleaning task.
*The cleaning cannot be started if the battery is too low. It is
recommended to fully charge before initial using. (If the
white indicator light for power is normally on, it indicates that
charging is complete.)

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Instruction
On/Off
Machine charging Connection network for the machine
Reset method:
*To ensure that the robot vacuum cleaner can be networked,
place the charging stand within the range covered by WiFi.
Placement of the charging stand
1. In case the main machine is being charged on the
charging stand, it will automatically turn on.
2.During its charging, the machine cannot be turned off.
3.Long press the power key, the power indication light will
light up and the machine turns on. Meanwhile, there will
be a voice prompt after completion of turning on.
4. In case the main machine is static, long press the
power key to turn it off.
3. If the machine is turned off automatically due to low
power, you can manually take it back to the charging
stand for charging. Make sure the charging electrode is in
good contact and check whether the charging indication
light is on.
4.After the machine is fully charged, please turn it off if it
doesn’ t work. If the charging is kept for a long time,
which may damage the battery.
Before connecting the network, please make sure that the
mobile phone and the machine are within the WiFi cover-
age and as close as possible to the router.
In case the router configuration or the password is
changed, or the mobile phone cannot be connected to the
device due to other reasons, reset the WiFi of the
machine for pairing.
After turning on the machine, press both the power key
and the recharge key simultaneously for 3 seconds until
you hear the voice prompt and the WiFi indication light
slowly flashes, which indicate that the WiFi reset is suc-
cessful.
Device pairing:
Open the APP to add device and operate by following
APP prompts.
* Robot vacuum cleaner does not support 5G WiFi;
*And it does not support WiFi with WEP encryption.
Place the charging stand on a horizontal floor against the
wall and ensure enough space on both sides and the
front side of the charging stand. Connect the power
adapter to the charging stand and plug the power adapter
into the power outlet.
1. After cleaning, the machine will automatically return to
the charging stand for charging. If it cannot return to the
charging stand, try to remove the obstacles around the
charging stand or take the cleaner back to the charging
stand for charging.
2.During the cleaning, if the battery of the machine is
lower than 20%, it will automatically return to the charging
stand for charging. After the battery is fully charged, it will
automatically return to the breakpoint to continue clean-
ing.

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Instruction
Precautions before use
*Please clean up small objects, fragile articles, cables, curtain ropes, etc. scattered on the ground before use to prevent
entanglement or damage of the property.
* The users with a duplex structure such as stairs etc. in their homes shall specially note that it is strictly forbidden to use the
product in the fenceless suspending environment, which is higher than that of the family activities.

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Product maintenance
Cleaning of the dust box and filter
1. Open the machine cover upwards and remove the
dust box.
2.Open the dust box cover and remove the garbage inside.
3.Open the filter bracket on the dust box to remove the
high efficiency filter.
* To ensure the cleaning effect, please clean the filter regularly and
replace it every 6-12 months.
4. Clean the dust box and filter with a cleaning brush. The
dust box and primary filter can be cleaned with water。
5.Please thoroughly dry the dust box and filter after washing
with water. Install the dust box in the machine after installa-
tion of the filter.