ZiFiSense ZETA Mote User manual

MTZT-IN01
1
ZETA Mote

MTZT-IN01
2
Copyright Statement
ZiFiSense owns the copyright on this specification. No part of
this specification may be reproduced in any form or means,
without the prior written consent of ZiFiSense.
Disclaimer
This specification is preliminary and is subject to change at any
time without prior notice. ZiFiSense assumes no responsibility
for any errors contained herein. ZiFiSense is not responsible for
any patent infringement of third party on its use or as a result
of its uses. Other products/services not certified by the patent
license, shall be deemed within patent ownership of ZiFiSense.

MTZT-IN01
3
Table of Contents
1. Product Description............................................................................................................ 4
2. Applications ............................................................................................................................ 4
3. Features.................................................................................................................................... 4
4. Appearance and size........................................................................................................... 5
5. Product parameters...........................................................................................................7
6. Packing List............................................................................................................................ 7
7. Installation ............................................................................................................................... 8
7.1. Wall mounting..........................................................................................................8
7.2. Hoop installation................................................................................................... 9
8. Battery replacement.......................................................................................................10
9. Operating Instructions ...................................................................................................11
9.1. Platform login ........................................................................................................11
9.2. Device configuration ........................................................................................ 11
9.3. Check Status........................................................................................................12
10. Common faults and handling................................................................................. 13
11. Safety instructions........................................................................................................13
12. Revision.............................................................................................................................. 14

MTZT-IN01
4
1. Product Description
ZETA Mote is a low power mesh layer relay which can build up to four
layers of tree type networking, effectively increasing single-station
coverage, with signal blind area coverage, preventing data congestion, etc.
Two-way communication, ultra-wide coverage, multiple security, ultra-low
power consumption, battery-powered, easy installation and support for
null port upgrade. The product complies with IEC 60079 intrinsically safe
explosion-proof standard, the explosion-proof mark is Ex ia IIC T4 Ga, and
the operating environment temperature is -20℃~+60℃. Suitable for
industrial and chemical scenarios.
2. Applications
ZETA network device, connect other ZETA modules to the ZETA AP,
incresing single AP coverage area.
3. Features
Two-way communication, super wide coverage
Extreme capacity, multiple safety
Multi-hop networking, multiple protocols
Battery powered, low power consumption
Adjustable bandwidth and spectrum

MTZT-IN01
5
4. Appearance and size
L148.5mm * W113.5mm * Th43.9mm
(Excluding mounting bracket dimensions)

MTZT-IN01
6

MTZT-IN01
7
5. Product parameters
Product No. MTZT-IN01
Electrical Features
Power supply DC 5V / Battery:2*ER34615
Battery capacity 2*19000 mAh
Stand-by current ≤ 10 μA
Working current ≤ 70 mA
Physical Features
Weight 0.6kg
Size 148.5*113.5*43.9mm
Enclosure material ADC12 Aluminum alloy
Antenna FRP Antenna
Environment
Specification
Operating temperature -20℃~+60℃
Storage temperature -30℃~+85℃
Ingress protection IP65
Hazardous environment Ex ia IIC T4 Ga
6. Packing List
ZETA Mote 1
0.4m FRP Antenna 1

MTZT-IN01
8
7. Installation
7.1. Wall mounting
Mounting brackets

MTZT-IN01
9
7.2. Hoop installation
Mounting brackets
External threaded hole to match 75mm diameter holding
bar
Inner threaded hole to match 50mm diameter
holding bar

MTZT-IN01
10
8. Battery replacement
Loosen the 4 M6 socket head cap screws (Lanyard) and open the top
cover.
Top cover
Bottom cover
Thread

MTZT-IN01
11
9. Operating Instructions
9.1. Platform login
Log in to ZETA network management platform, platform address
https://platforms.zifisense.com/network/#/login
Figure: Platform login
9.2. Device configuration
After logging in, go to the Network Device - ZETA Mote page and click the
Add button to add a new device.
And add the Mote information in the pop-up window (see the actual device
nameplate information for details).

MTZT-IN01
12
9.3. Check Status
After the device is added, you can view the data of the added device in the
list. When the device is powered on, the online status will change from
"offline" to "online", and the startup time, registration time and heartbeat
time are updated.

MTZT-IN01
13
10. Common faults and handling
Ensure ZETA signal coverage
Check the power supply to ensure that the power supply is normal
Check the antenna to see if the antenna is connected and the antenna
interface is properly tightened.
Check the device power, check whether the device is in low power
state in the platform list data, or use the tool to measure whether the
voltage is low or low.
Please contact ZiFiSense for additional help.
11. Safety instructions
1. Avoid an ignition hazard due to impact or friction.
2. Potential electrostatic charging hazard: clean the antenna only with a
damp cloth.
3. Only ER34615 lithium thionyl chloride battery produced by EVE Energy
Co., Ltd. is allowed to be used as the power supply. Do not charge the battery.
Do not replace battery when an explosive atmosphere is present.

MTZT-IN01
14
12. Revision
Version File name Revised by Date Description
V1.0.0 ZETA Mote User
Manual OUYI 2021.12.20 First edition
V1.0.1 ZETA Mote User
Manual OUYI 2022.6.1 Add Operation instruction part
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

MTZT-IN01
15