ZINK HAPPY+ User manual

QUICK START GUIDE

Congratulations
on your new
ZINK hAppy+™!
In this guide we’ll get you
set up in no time.
If you have any questions,
call us at
877-711-ZINK (9465)
or visit us online
at ZINK.com.

3
What’s in the Box
ZINK hAppy+™
AC Power Adapter
1/2" zRoll™
(Green)
Cleaning zRoll™
(White, Non-Printing)

4
1. Insert the AC power adapter into the port
on the SIDE of your ZINK hAppy+™.
STEP 1
Plug In, Power On, and Charge Your ZINK hAppy+™
2. Connect the two sections
of the AC power adapter
and plug into a wall outlet.
The hAppy+™ has a
built-in rechargeable
battery. The battery
can take up to six
hours to fully charge.

5
STEP 1
Plug In, Power On, and Charge Your ZINK hAppy+™
3. Press and hold the power
button located on the top
of your ZINK hAppy+™ for
1–2 seconds and release. It
takes about 30 seconds for
your hAppy+™ to power up.
Complete Step 2:
Loading Your zRoll™
before beginning
the on-screen setup
of your hAppy+™

6
2. Open the zRoll door on
the back of your hAppy+™.
1. Unpack the zRoll and remove
the pull-tab from the top.
Pull-Tab
Remove the tab
before inserting
into hAppy+™.
Finger Grip
STEP 2
Load Your zRoll™

7
4. Your hAppy+™ will eject a small
piece of ZINK paper to complete
the loading process.
3. Hold your zRoll by the two finger grips on each side
and line up the V-shaped ridge on your zRoll with
the notch on your ZINK hAppy+™. Push the zRoll until
you hear a slight click. Close the door.
WELCOME!
LET’S GO!
Thank you for
purchasing the
ZINK hAppy+™
.
after a few short steps
your hAppy+™
will be setup and
ready to go!
WELCOME!
LET’S GO!
Thank you for
purchasing the
ZINK hAppy+™
.
after a few short steps
your hAppy+™
will be setup and
ready to go!

8
2. Follow the on-screen instructions
to set up your hAppy+™.
WELCOME!
LET’S GO!
Thank you for
purchasing the
ZINK hAppy+™
.
after a few short steps
your hAppy+™
will be setup and
ready to go!
WELCOME!
LET’S GO!
Thank you for
purchasing the
ZINK hAppy+™
.
after a few short steps
your hAppy+™
will be setup and
ready to go!
Wireless Router
(Wi-Fi®)
High-Speed
Internet
In order to set up your
ZINK hAppy+™ you will
need to have a wireless
Internet connection.
1. Make sure your hAppy+™ is
plugged into a wall outlet
during the setup process.
3. At the end of setup you
will see the Home Screen
of the ZINK Design &
Print Studio™ app.
STEP 3
Set Up Your ZINK hAppy+™

9
ART
16’ 4”
Background: #0084A9
Library
BROWSE THE ELEMENTS
BACKGROUNDSPHOTOS FRAMES
DESIGNS
ZINK® STORE LIBRARY
APPS
ZINK
STUDIO
DESIGN&PRINT
NEW DESIGN
SETTINGS
HOME STORE
?
INFO
hAppy not connected
hAppy status
on phone and tablets
16’ 4” 1”
/
38
”
16’ 4”
no zRoll
Empty
Empty
/
12
”
16’ 4”
hAppy not connected
hAppy status
on phone and tablets
16’ 4” 1”
/
38
”
16’ 4”
no zRoll
Empty
Empty
/
12
”
16’ 4”
/
12
”
16’ 4”
?
/
12
”
wi-fi battery Paper Remaing zRoll Size help
Create a
new design.
Adjust your Wi-Fi® ,
print, and application
settings.
Browse through
your designs, art,
frames, backgrounds,
and photos.
Learn more about
the app through
helpful video tutorials.
Browse and purchase art, frames,
backgrounds, ready-made designs,
additional ZINK apps and ZINK gear.
Launch additional
ZINK apps that
you downloaded.
Width
of zRoll™
Amount
remaining
in zRoll™
Battery Life
(shown charging)
Wi-Fi®
Status
Tap here to show
helpful tips
for each screen.
Status Bar
Home Screen

10
Printing With Your ZINK hAppy+™
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
The Smiths 256 Main Street Seattle, WA 01234
When you are ready to print a design press
the print button on your hAppy+™.
Be sure to wait for
your hAppy+™ to finish
printing your design
before removing it.
You will hear a distinct
cutting sound when
printing is completed.
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
1/2 11/2
1
2
2
return label
The Smiths
256 Main Street
Seattle, WA 01234
background
frame
photo
art
type
?
/
12
”
2.00
home
Print
Button

11
Acid-Free Permanent Adhesive-Backed
The zRoll™ adhesive has been specially created to allow
you to quickly and easily remove and reapply your design
if placed incorrectly. Your design will become permanently
secure over time.
Slight Overprint
The hAppy+™ slightly overprints your design
so you never have an unwanted white edge.
Kiss Cutting
When Kiss Cut is selected in Printer Options,
multiple copies will “kiss cut” between each
copy. All images can then be easily peeled
and applied to your project.
The Smiths
256 Main Street
Seattle, WA 01234
The Smiths
256 Main Street
Seattle, WA 01234
Printing Each Design
Printing Multiple Copies

12
1. Open the zRoll door on the back of the hAppy+™.
Be sure to wait until the whirring sound stops
before removing your zRoll.
Unloading Your zRoll™
Opening the zRoll door
automatically unlocks the
zRoll for removal.
Shutting the door locks
the zRoll and initiates
the automatic loading
process.

13
2. Grasp the zRoll by the two finger grips
on each side.
3. Lift the zRoll up slightly and away from
your ZINK hAppy+™. Close the zRoll door
after removing the zRoll.
Remove the zRoll when
not in use.
Store your unloaded zRoll
in a cool, dry place.

14
Get to Know Your ZINK hAppy+™
Print Output Slot Reset Button
Power/Sleep
Button
AC Adapter Port
Mini USB Port
zRoll™ Door
Back Button
Print Button
USB Port
SD Card Slot

15
Power/Sleep Button
• Turn hAppy+™ ON
Press and hold button for
2 seconds.
• Turn hAppy+™ screen OFF
Quickly press button.
• Wake up hAppy+™ screen ON
Quickly press button.
• Turn hAppy+™ OFF
Press and hold button for
2 seconds. (A power-down
screen will be displayed.
Press OK.)
Reset Button (on side of unit)
• Should your hAppy+™ become
unresponsive use the tip of
a ball point pen or paper clip
to press the reset button.
LED Signals
• Startup mode
LED remains on during
power-up.
• Ready mode
LED is off. The printer is ready
to print.
• Active/Print mode
LED blinks slowly to indicate
printing, receiving print data, etc.
• Attention mode
LED blinks fast to indicate
there is an error that prevents
printing.
• Sleep mode
LED blinks in a snooze/
heartbeat pattern.

16
Charging Your hAppy+™ Battery
• The internal battery can take up to
six hours to charge.
• The battery is not end-user replaceable.
Caring for Your ZINK hAppy+™
Cleaning zRoll™
(White, Non-Printing)
Battery Life
(Status Bar
indicator)
Cleaning zRoll™
• The Cleaning zRoll is not for printing. When
inserted, it will start a cleaning cycle.
• Use after every 20–30 prints for
best performance.
Cleaning Your hAppy+™ Screen
• Clean the hAppy+™ screen with a clean,
lint-free cloth.
• Never apply alcohol or any type of
detergent.
100% 10%
Battery Level
100% 10%
Battery Charging

17
Full-color, acid-free, permanent adhesive zRolls™
are available in five sizes.
zRoll
TM
ZINK® Zero Ink® Technology
ZINK® stands for Zero Ink®—an amazing new way to print in full color without the need
for ink cartridges or ribbons. Now you’ll be able to do things you’ve only imagined.
Finally a smart, easy, and affordable way to print in full color —all from a single zRoll™.

18
LIMITED WARRANTY STATEMENT
Extent of Limited Warranty
ZINK Imaging (“ZINK”) warrants to the end-user customer that the ZINK products will
be free from defects in material and workmanship from the date of original purchase
from ZINK or an authorized ZINK dealer or distributor for the durations described
below:
Product Type Parts and Labor Warranty
ZINK hAppy+™ 1 year
ZINK zRolls™ 1 year
ZINK hAppy™ Accessories 1 year
For software products, ZINK’s limited warranty applies only to a failure to execute
programming instructions. ZINK does not warrant that the operation of any product
will be uninterrupted or error free. ZINK’s limited warranty covers only those
defects that arise as a result of normal use of the product and does not cover any
other problem, including those that arise as a result of: (i) improper maintenance
or modification; (ii) software, media, parts or supplies not provided or supported
by ZINK; (iii) operation outside the product’s specifications; or (iv) unauthorized
modification or misuse.
If ZINK receives, during the applicable warranty period, notice of a defect in any
product which is covered by ZINK’s limited warranty, ZINK shall either repair or
replace the product, at ZINK’s option. If ZINK is unable to repair or replace, as
applicable, a defective product which is covered by ZINK’s limited warranty, ZINK
shall, within a reasonable time after being notified of the defect, refund the purchase
price of the product.
ZINK shall have no obligation to repair, replace or refund until the customer obtains
a Return Material Authorization (RMA) number and returns the defective product
to ZINK.
Any replacement product may be either new or like-new, provided that it has
functionality at least equal to that of the product being replaced. The limited warranty
on any replacement product will be 90 days from the date that it is shipped to the
customer or the remainder of the limited warranty on the original product, whichever
is longer.
ZINK products may contain remanufactured parts, components, or materials
equivalent to new in performance. ZINK’s Limited Warranty Statement is valid in any
country where the covered ZINK product is distributed by ZINK.
Transferable
This limited warranty is transferable.
Limitations of Warranty
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER ZINK NOR ITS THIRD PARTY
SUPPLIERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER
EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.
Limitations of Liability
To the extent allowed by local law, the remedies provided in this Limited Warranty
Statement are the customer’s sole and exclusive remedies.
TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS
SPECIFICALLY SET FORTH IN THIS LIMITED WARRANTY STATEMENT, IN NO EVENT
SHALL ZINK OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON
CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
Local Law
This Limited Warranty Statement gives the customer specific legal rights. The
customer may also have other rights which vary from state to state in the United
States, from province to province in Canada, and from country to country elsewhere
in the world.
To the extent that this Limited Warranty Statement is inconsistent with local law, this
Limited Warranty Statement shall be deemed modified to be consistent with such
local law. Under such local law, certain disclaimers and limitations in this Limited
Warranty Statement may not apply to the customer. For example, some states in
the United States, as well as some governments outside the United States (including
provinces in Canada), may: (i) preclude some or all of the disclaimers and limitations
set forth in this Limited Warranty Statement from limiting the statutory rights of a
consumer (e.g., United Kingdom); (ii) otherwise restrict the ability of a manufacturer
to enforce such disclaimers or limitations; or (iii) grant the customer additional
warranty rights, specify the duration of implied warranties which the manufacturer
cannot disclaim, or allow limitations on the duration of implied warranties.
THE TERMS IN THIS LIMITED WARRANTY STATEMENT, EXCEPT TO THE EXTENT
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN
ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE
OF THE ZINK PRODUCTS TO SUCH CUSTOMERS.
How You (the Customer) Can Obtain Service and Support
To obtain warranty service, an RMA number or support, please call ZINK Imaging
Customer Care at 877-711-ZINK (9465). If warranty service is needed at any time
during the warranty period, you will be asked to furnish a sales receipt/proof of
purchase from ZINK or an authorized ZINK dealer or distributor indicating the date of
purchase, amount paid and place of purchase.

19
COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement: This product complies with the FCC portable RF
exposure limit as set forth for an uncontrolled environment and is safe for its intended
operation as described in this manual. Further RF exposure reduction can be
achieved by use as far as possible from the operator or by lowering the power output
on the device if such a function is available.
Note: The country code selection is for non-US models only and is not available
on US models. Per FCC regulation, all WiFi product models marketed in the US must
be fixed to US operation channels only.
RECYCLING INFORMATION
For information about recycling ZINK Imaging batteries or zRolls, please contact us at
877-711-ZINK (9465). Or check out our website at ZINK.com.
DISCLAIMER
This guide may not be indicative of the latest version of the Zink Design & Print
Studio app. ZINK Imaging may make improvements and/or other changes to the app
at any time.
ZINK Imaging and other parties involved in the creation, production, or delivery of the
Zink Design & Print Studio app make no warranty, implied or explicit, that any part of
the service will be uninterrupted, error-free, virus-free, timely, secure, or accurate, nor
that the content is safe in any manner for download.
RISK OF EXPLOSION IF A NON-ZINK HAPPY™ BATTERY IS INSTALLED. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
CAUTION
BATTERY GUIDELINES AND WARNINGS
• Don’t disassemble the battery.
• Don’t short circuit the battery.
• Don’t heat or expose the battery to open flame. Heating or exposing the battery to
open flame may cause the battery to explode.
• Don’t use the battery near heat.
• Don’t use the battery near an open fire, oven or any environment where the
temperature is above 140°F/60°C.
• Keep the battery dry.
• Don’t charge the battery in direct sunlight or in excessive heat.
• Only use the specified power supply when charging the battery.
• Don’t physically alter the battery. Don’t chip, break, or otherwise damage the
battery housing.
• Don’t solder the battery. The high temperature of soldering will damage the battery
housing.
• Don’t connect the battery directly to a main power source or any other improper
power supply.
• Don’t use the battery in any other devices.
• Don’t touch any liquid that may leak from the battery. Electrolyte leakage can be
dangerous. If electrolytes come in contact with skin or eyes, immediately flush with
water and seek medical assistance.
• Don’t store the battery in a pocket or bag together with metallic objects such as
keys, jewelry, hairpins, or coins.
• Don’t hit the battery with heavy objects such as a hammer or a weight.
• Don’t put the battery in a microwave oven, dryer, or high-pressure container.
• Stop charging the battery if charging is not completed within 6 hours.
• Stop using the battery if it becomes too hot to touch or if foul odors are detected.

If you have any questions, call us at 877-711-ZINK (9465)
or visit us online at ZINK.com.
©2013 ZINK Imaging Inc. ZINK, hAppy, and zRoll are registered trademarks of ZINK Imaging Inc. All rights reserved. Wi-Fi is a registered trademark of the Wi-Fi
Alliance. All other trademarks and copyrights are the property of their respective owners. Screen images and prints may be simulated. For use in the U.S.A. zonly. Designed
by ZINK Imaging, 16 Crosby Drive, Bedford, MA 01760 USA 40103100_05102013