Ziton ZP3-AC1 Assembly instructions
© 2022 Carrier. All rights reserved. 1 / 2 P/N 10-3301-501-2004-04 • ISS 08NOV22
ZP3-AC1 Accessory Chassis Installation Sheet
1
2
3
2 / 2 P/N 10-3301-501-2004-04 • ISS 08NOV22
Description
The ZP3-AC1 Accessory Chassis allows for the installation of
up to five ZP3 auxiliary boards into a ZP3-AB1 Accessory Box
(sold separately).
The chassis includes a preinstalled ZP3AB-SCB-R Serial
Control Bus Interface and integrated loop and power cabling.
Figures
Fi
gure 1: Chassis layout and dimensions
Figure
2: Chassis installation (accessory box sold separately)
Figure
3: ZP3AB-SCB-R wiring
Installation
WARNING: Electrocution hazard. To avoid personal injury or
death from electrocution, remove all sources of power and
allow stored energy to discharge before installing or removing
equipment.
To install the chassis:
1. Install all required boards onto the chassis.
2. Connect the red (+24 VDC), black (0 VDC), and
green/yellow (earth) cables to the corresponding terminals
on the auxiliary boards.
See the ZP3 control panel installation manual for detailed
information on wiring for each auxiliary board.
3. Remove the ZP3-AB1 accessory box door assembly.
4. Install the chassis into the accessory box and secure it
with the 4 x M4 screws and washers provided.
5. Connect the RS-485 and power supply cables to the
terminal block above the preinstalled ZP3AB-SCB-R on
the accessory chassis.
6. Replace the accessory box door assembly.
Specifications
Operating
voltage 24 VDC
Mounting holes
4
Operating environment
Operating temperature
Relative humidity
−5 to +40°C
10 to 90% (noncondensing)
Weight
4 kg approx.
Dimensions (W × H × D)
375 × 468 × 52 mm
Regulatory information
Conformity
Manufacturer
Carrier Manufacturing Poland Spółka Z o.o.,
Ul. Kolejowa 24, 39-100 Ropczyce, Poland.
Authorized EU manufacturing representative:
Carrier Fire & Security B.V., Kelvinstraat 7,
6003 DH Weert, Netherlands.
2012/19/EU (WEEE Directive): Products
marked with this symbol cannot be disposed
of as unsorted municipal waste in the
European Union. For proper recycling, return
this product to your local supplier upon the
purchase of equivalent new equipment, or
dispose of it at designated collection points.
For more information see: recyclethis.info.
Contact information and product
documentation
For contact information or to download the latest product
documentation, visit firesecurityproducts.com.
Product warnings and disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO AND
INSTALLATION BY QUALIFIED PROFESSIONALS.
CARRIER FIRE & SECURITY B.V. CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY “AUTHORIZED DEALER” OR
“AUTHORIZED RESELLER”, IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE AND
SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers
and product safety information, please check
https://firesecurityproducts.com/policy/product
-
warning/
or scan the QR code:
