Zomm Wireless Leash Troubleshooting guide

Thank you for choosing ZOMM.
If you have any questions, please contact our support team at support.zomm.com.
BLUETOOTH® IS A TRADEMARK OWNED BY THE BLUETOOTH SIG, INC. AND IS USED UNDER LICENSE
ZOMM® IS A TRADEMARK OF ZOMM, LLC WIRELESS LEASH™ IS A TRADEMARK OF ZOMM, LLC
myZOMM™ IS A TRADEMARK OF ZOMM, LLC
© ZOMM,LLC 2010, 2011 ALLRIGHTS RESERVED
MATERIALPRESENTED WITHIN SUBJECT TO CHANGE WITHOUT NOTICE
in the box about the ZOMM Wireless Leash
Z-button (with Z-light)
perimeter alert light
micro-USB port with dust cover
metal loop
reset butto n
high-powered micro-speaker
noise-cancelling microphone
charging the ZOMM
NOTE: If the ZOMMis on and connected to your phone,all of its features
will function while charging.
1. Gently open the dustcover.
2. Insert the micro-USB end of the charging cable into the
ZOMM’s mi c ro -US B p or t.
Low Battery Alert: When the battery level is low, the ZOMM will alert you by
sounding three short beeps every few minutes.
When charging, the ZSPNO[^PSSÅHZOVUJLWLY ZLJVUKHUK^OLUJOHYNLK^PSS
remain lit. For best battery lif e, fully charge the ZOMM for 4 hours.
USB Wall Charger:
3. Insert the USB cableinto the wall charger and
then plug the wall charger into a wall outlet.
Computer:
3. Insert the cable into one of your computer’s USB
ports. Make sure your computer is on and awake
for the duration of the charge.
Car Charger:
3. Insert the USB cable into the car charger and then
insert the car charger into your car’s power port
or cigarette lighter.
1. Navigate to zomm.com.
2. Click on the myZOMM link at the top of the page.
3. Log in or create an account.
4. Follow the instructions to update or customize your ZOMM.
Be sure to customize your ZOMM with myZOMM to get
all the latest features and updates!
customizing the ZOMM









off
1. Ensure your phone is turned ON and the Bluetooth
feature is enabled.
2. Veri fy th at the ZOMM is unplugged and turned OFF
(Z-light is OFF).
3. Press and hold the Z-button untilyou hear the second beep
(9 seconds).
4. On your phone, search for Bluetooth devices.
5. Select the ZOMM from the list of found Bluetooth devices
on your phone.
6. Pair and connect the ZOMM. If a PIN is required, use 0000.
hold until
2nd beep
56;,!6UJLJVUULJ[LK[OLASPNO[^PSSÅHZO
every few seconds.
pairing the ZOMM
off
connect
to
ZOMM?
0000
quick start guide
visit zomm.com to customize and receive
updates for your ZOMM
®
World ’s Firs t Wi re le ss L ea sh ™for Mobile Phones
one ZOMM
Wireless Leash
one quick-release
keychain
one visor clip
one micro-USB
charging cable
one USB
wall charger
one car charger
Keychain (closed)
Keychain (open)
insert keyring in
open slot Insert into visor clip
as shown
Pull the metal loop
downwards to remove
1. Attach the ZOMM to one of the four quick-release key rings.
2. Pull the quick-release slide toward the center of the key-ring
hub to remove or re-attach any of the key rings.
3. The quick-release slide will springback into the locked
position when you let go of it.
1. Slide the clip ontothe right-hand side of your visor with the
ZOMM holder facing down.
2. Snap the ZOMM into the visor clip with the Z-button facing
down and the metal loop toward the windshield.
3. To re m ov e the ZOMM from the clip, pull the metal loop
downwards.
using the quick-release keychain using the visor clip

using the wireless leash feature
WARNING: THEALARM CAN CAUSE TEMPORARY OR PERMANENT
HEARING LOSS IF PLACED CLOSE TO THE EAR.
The same alert will occur if the Bluetooth wirelessconnection with
your phone is lost or if your phone is turned OFF while the ZOMM
is connected. To avoid unnecessary alerts, turn OFF the ZOMM
before turning OFF your phone.
NOTE: The ZOMM’s leash lengthvaries based on environment
and your customized myZOMM settings.
vibrating ÅHZOPUN alarm
To ca n c e l t h e W ir e l e s s L ea s h a l a r m , t ap t h e Z-button once.
When your mobile phone and the ZOMM become separated
(between 30-120 feet), the ZOMM will alert you by vibrating,
ÅHZOPUNP[ZSPNO[ZHUK[OLUZV\UKPUNHUHSHYT









you
have new
voicemail
When receiving an incoming call, tap the Z-button:
 Once to accept and route the call to the ZOMM.
 Twi c e i n a ro w t o se nd th e c al l to vo i ce mai l .
tap once speakerphone
tap twice
incoming call
incoming call
talk
voicemail
managing incoming calls









Laurie
2:36
speakerphone tap to
transfer
During an active call, tap the Z-button:
 Once to tr ansfer t he call f rom you r mobile p hone to t he ZOMM.
 6UJLHNHPU to transfer the call from the ZOMM to your
mobile phone.
 ;^P J L in a row to end the call.
To tr a n s f e r a n ou t g o i n g c a ll t o t h e ZOMM:
1. Place a call with your mobile phone.
2. When the call is ringing, tap the Z-button once to transfer the
outgoing call to the ZOMM.
managing active calls
release
Z-button
9 seconds PAN IC a la r m
WARNING: THEPANIC ALARM CAN CAUSE TEMPORARY OR
PERMANENT HEARINGLOSS IF PLACED CLOSE TO THE EAR. USE
ONLYIN THE EVENT OF AN ACTUAL EMERGENCY.
NOTE: To cancel the PANIC alarm, tap the Z-button.
NOTE: To adjust the speakerphone volume, toggle your phone’s
volume controls up or down while talking on the ZOMM.
To tr i g g e r t h e PA N I C al a r m :
1. Press and hold the Z-button untilthe alarm sounds
(9 seconds).
2. Immediately release the Z-button.
using the PANIC alarm
15 seconds PANI C al a rm emergency call
1. Press and hold the Z-button for 15seconds
(through the 6-second PANIC alarm).
2. Release the Z-button after the ZOMMUV[PÄLZ`V\[OH[P[PZ
dialing emergencyservices.
3. The ZOMM will then place an emergency call using your
mobile phone. The ZOMM will serve as a speakerphone for
the emergency call.
4. You M US T end th e eme rg en cy ca ll f ro m y ou r m ob il e phon e.
WARNING: O NLY USE THIS FEATURE I N THE EVENT OF
AN ACTUAL EMERGENCY.
NOTE: You can mute/unmute the speaker with a tapof
the Z-button but themicrophone will remain activefor the
duration of the call.
placing an emergency call
To re s e t t h e ZOMM:
1. Insert a paper clipinto the reset button hole.
2. Gently press and release the RESET button using the paper clip.
3. Tur n O N th e ZOMM.
Should the ZOMM stop functioning, resetting the ZOMM will turn
it OFF.When the ZOMM is turned back on, it will return to normal
operating mode.
NOTE: The reset button hole is located under the metal loop
on the top of the ZOMM.
resetting the ZOMM
WARNING :
 Keep the ZOMM device out of reach of children and pets.
 You ar e sole ly res pon sibl e for us ing y our mo bile p hon e and th e ZOMMin compliance
with any laws relating to the use of mobile phones while driving or operating machinery.
 Do not expose the ZOMMKL]PJL[VSPX\PKTVPZ[\YLÄYLVWLUÅHTLZVYL_[YLTL
temperatures.
 Failure to properly carefor the ZOMM device voidsall warranties andmay increasethe
risk of serious injury or death and damage to the ZOMM device and other devices.
 Failure toheed all electricalsafety precautionscan resultin seriousinjury, deathfrom
LSLJ[YPJZOVJRVYÄYLVYTH`YLZ\S[PUWLYTHULU[KHTHNL[V[OLZOMM device.
 Failure toheed all acoustic safetyprecautionscan resultin seriousinjury tothe ear or
permanent loss of hearing.
 Always checkyour locallistingsfor the correct emergencynumber foryour current
SVJH[PVUHUKJVUÄN\YL`V\YZOMM accordingly.
NOTE: This quick start guide is designedto get you started.
If you are havingtrouble, visit zomm.com/usermanual to
download the full user manual.
Support for certain features may be dependent upon your mobile phone.
For more info go to support.zomm.com.
[1]ZOMM uses the paired and connected mobile phone to initiate an emergency call via the
Bluetooth
wireless interface and requires mobile phone carrier service. Emergency assistance dialing featuresmay
not work on all phones and on all networks. Always check your local listings for the correct emergency
number for your current location and set your ZOMM’s emergency number accordingly. The default
U\TILYJ\YYLU[S`\ZLKPU[OL<:(PZ¸ ¹HUKPZJVUÄN\YLKJOHUNLK^P[O[OLmyZOMM software.
safety information and support
Note on environmental protection:
(M[LY[OLPTWSLTLU[H[PVUVM[OL,\YVWLHU+PYLJ[P]L ,<PU[OLUH[PVUHSSLNHSZ`Z[LT[OLMVSSV^PUNHWWSPLZ!
Electricaland electronic devices may not be disposed of with domestic waste. Consumers are obliged by law
to return electrical and electronic devices at the end of their service lives to the public collecting points set
\WMVY[OPZW\YWVZLVYWVPU[VMZHSL+L[HPSZ [V[OPZHYLKLÄULKI`[OLUH[PVUHSSH^VM [OLYLZWLJ[P]LJV\U[Y`
This symbol on the product, the instruction manual or the package indicates that a product is subject to
these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you aremaking
an important contribution to protecting our environment.
ZOMM, LLC. (“ZOMM”) extends the following limited warranty forits ZOMM
Wireless Leash. ZOMM»Z ^H YY HU [`  VIS PN H[ PV UZ  HYL  SP TP [L K [ V [ OL Z WL JP ÄJ[LYTZ
set forth below:
One YearLimited Warranty: ZOMM wa rra nts to t he or igi nal re tai l pur chas er (“you”)that
the ZOMM WirelessLeashwill be freefromdefectsin materialsand workmanshipfor
aperiodof one (1)year fromthedate of youroriginal purchase(the“WarrantyPeriod”),
Z\IQLJ[[VZWLJPÄJL_JS\ZPVUZPKLU[PÄLKH[zomm.com/warranty.
EXCEPT FOR THE EXPRESS LIMITED WARRANTY ZOMM HAS PROVIDED
AT ZOMM.COM/WARRANTY, YOU TAKE THE PRODUCT AND ANY
ACCESSORIES “AS IS.” ZOMM MAKES NO OTHER WARRANTY OR
REPRESENTATION CONCERNING THE PRODUCT, AND EXPRESSLY
DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, OF WHATEVER KIND OR NATURE,
INCLUDING BUT NOT LIMITED TO ANY AND ALL IMPLIED WARRANTIES,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULARPURPOSE.
If ZOMM cannot lawfully disclaim or exclude impliedwarranties underapplicable
law,then to the maximumextent possiblethe duration of suchimplied warranties
shall expire on expiration of the warranty period.
one year limited warranty
turning the ZOMM on/off
release
Z-button
hold until
1st beep
vibrating/
ÅHZOPUN
To tu r n O N t h e ZOMM:
1. Press and hold the ZI\[[VU\U[PS`V\OLHY[OLÄYZ[ILLW
(3 seconds).
2. Release the Z-button immediately.
3. The ZOMM will automatically reconnect to thelast
paired mobile phone.
Before turning the ZOMM ON or OFF, make sure it is unplugged.
To tu r n O F F t h e ZOMM:
1. Press and hold the ZI\[[VU\U[PS `V\ OLHY [OL ÄYZ[ ILLW
(3 seconds).
2. Release the Z-button immediately.
3. The Z-light will turn OFF.