Zon HeatoN Select User manual

headset2 Wireless
User Manual

This is evolved gaming gear, co-developed, tested
and approved by eSport legend HeatoN. Serious
performance with a sophisticated style that fits a
new home of victory, without compromise.
ZON – Home of Victory
Welcome Home.

APPROVED BY A LEGEND
ZON – Home of Victory is tournament-grade gaming gear that
stands out for its performance and responsiveness under
pressure. But don’t take our word for it. Take the word of
HeatoN who co-developed and approved each ZON product
after immense amount of testing and tweaking every last detail.
And it wasn’t just about how everything felt, it was also about
how everything looked.

HeatoN is a legend in the world of eSports. One of the very first
professional gamers, he’s always been a fearless pioneer, taking
himself – and eSports – to new heights. With ZON, he saw the
opportunity to be there from the start, helping bring a new
standard in gaming gear design and performance to the world.
And most importantly bringing it to people like himself – gamers
who need to balance their passion for gaming with the realities
of everyday life.

The clean, stylish looks of ZON gaming gear were everything
he wanted for himself and his home life. But to get his seal of
approval, HeatoN Select, it had to deliver tournament-grade
performance. After 500 hours testing and optimizing each
product, feeling every last sensation and response he was
getting from his hands, eyes, heart and mind, HeatoN was finally
satisfied. The result is a selection of gaming mice, mousepads,
keyboards and headsets that he considers to be among the best
he’s ever used. And good enough to be HeatoN Select.

ENGLISH
SVENSKA
NORSK

1
13
25

ENGLISH
1.
Precautions
Incorrect use will damage the product, so please
pay attention to the following usage points:
1. Do not bump the product.
2. Do not put the product in liquid.
3. This product shall not be thrown away or
incinerated but disposed of in accordance with
your local regulations concerning chemical
wastes.
4. The unit may get hot during use, this is normal.
5. The lifetime of the rechargeable battery
is about 300 cycles. Disconnect it from
charging as soon as it is fully charged, to avoid
overcharging. Overcharging will decrease the
battery lifetime and may cause the battery to
swell more quickly.
6. Charge the battery every 3rd month if you do
not use the product for a longer period of time.
This is to ensure the battery performance.

ENGLISH
2.
Warning: Risk of fire
This product contains a lithium battery. When
a device with a lithium battery is damaged
(either once or several times repeatedly), the
lithium-ion cells can be affected by a so-called
‘thermal rush’. Thermal rush means that energy
is released in the form of heat inside the battery
and fire occurs quickly. It becomes a self-
generating process that takes place explosively
and is very difficult to extinguish.
How to avoid this:
Do not apply excessive force on the product
(do not hit or drop the product).
Do not charge the product if it is very warm,
to avoid charging a warm battery.
Do not cover the product.
Always inspect the product and stop using
it if leakage, strange odors, color changes,
deformation or any unusual occurrences are
detected (if any leakage goes into your eyes,
never rub them - clean your eyes with water and
get medical help).
Charge the product under supervision.

ENGLISH
3.
Never disassembly or refit the unit. Repairs to the
equipment shall only be performed by qualified
personnel. Improper repairs may place the user
at serious risk.
This product is not a toy. Never leave the
equipment within reach of children and do not
allow children to play with it.
Do not push any objects into openings as
damage to the equipment may occur.

ENGLISH
4.
Important
Keep in mind that this is a wireless product which
means it is sensitive to interference. For best
performance:
• Connect the USB receiver directly to a USB
2.0 port in a computer and not a USB hub. The
headset receiver must be connected to a USB
port on the computer’s motherboard.
• To minimize the risk of interference; a clear line
of sight between the receiver and the product
is a must. If necessary; use a USB-A extension
cable to be able to place the receiver on the
desk.
• If you are using more than one USB receiver;
make sure they are not located too close to
each other as they might interfere each other’s
signals. In this case, a USB-A extension cable
might be necessary to be able to keep a good
distance.

ENGLISH
5.
Product overview
Microphone On / O
Increase / Decrease Volume
Power Button
Aux In Port
Working Mode Indicator
LED Indicator Button
2.4G / Bluetooth Switch
Charging Port
Charging Indicator
5
6
7
8
9
1
2
3
4

ENGLISH
6.
Removable Microphone
LED Indicator
11
10
16
7
8910
11
5
2
3
4

ENGLISH
7.
Charging
LED indicator
1. The charging indicator will quickly flash in
red if the battery is low. Charge the headset
immediately.
2. During charging, the working mode indicator
will slowly flash in red. Once fully charged, the
indicator light steadily in white.
1. Single press the LED indicator button to
change the indicator color.
2. Double press the LED indicator button to
change to single color breathing mode.
3. Triple press the LED indicator button to change
to 5 colors breathing mode.
4. Long press the LED indicator control button for
3 seconds to turn on/o the LED indicator.

ENGLISH
8.
Bluetooth mode
1. Press and hold the power button and set the
switch to BT (Bluetooth) mode. The headset
will prompt a signal and the working mode
indicator will flash in blue when starting to pair.
2. Select “headset2” from the list of discovered
Bluetooth units and enter password 0000,
if needed.
3. When pairing is successful, the working mode
indicator will light steadily in blue.
4. The headset will automatically pair to the
previously paired unit when turned on again.

ENGLISH
9.
2.4G wireless mode
Wired mode
1. Connect the USB transmitter to a USB port on
your computer.
2. Press and hold the power button and set
the switch to 2.4G mode. The working mode
indicator will flash in white when starting to
connect.
3. When connected, the USB transmitter light is
solid blue. The working mode indicator stays
white.
1. Connect the 3.5 mm cable to the AUX In port, it
will automatically change to wired mode even
though it is in other mode.
2. In wired mode, the light turns off. The control
buttons on the headset will not have any
function. The volume and microphone can be
controlled by the cable controller instead.

ENGLISH
10.

ENGLISH
11.
Driver 53 mm
Frequency response 20Hz-20kHz
Impedance 32Ω
Sensitivity 98dB (±3dB)
Cable length 125 cm
Connectivity
Battery type
Battery life
Battery charging time About 6 hours
Specifications
Headset
2.4G / Bluetooth /
Wired
Up to 24 hours
of gaming
Li-ion polymer
rechargeable battery
3.7V/1500mAh