Zorg 3304 User manual

Warning: Always obey
Federal,
State and local laws when
installing
and
using
this
product. Zorg North America LLC.
is not
responsible
for
damages,
accident, theft,
or other situations caused
by improper
use
or installation.
NOTE:
In
Extreme cold weather the
LCD
panel may
look darker when
powered
on. This is normal
with LCD
panels
and
will
return to full
viewing brightness
as the
panel
warms to a normal
operating
temperature.
This
monitor is NOT weather resistant or water proof. It should not be
used outdoors or in wet enviroments.
When cleaning the monitor screen use a soft cloth with a gentle glass
cleaner on the cloth. Do NOT spray cleaner directly on the monitor.
We recommend using Dielectric Grease on all 4 pin HD camera
connections to insure a long life without interuption. It is a warranty
requirement to use Dielectric grease on all connections that are
subject to moisture. Water intrusion is NOT covered by warranty.
3304 6.5" MONITOR

Wiring Diagram
Specifications
Description
Model
Display mode
Item No. Cam 2
Cam 1
RED: ACC +12-24Vdc
Black: GND
Grey: Trig V2
White: Trig V1
Connector
Avia tio n Fe mal e Con ne cto r Avi ati on M ale C onn ec tor
+12V Vi deo
GND N/A
Video +12V
N/A GND
Light Sensor
800*480
16:9
2 way (CVBS)
DC 12-24V
Signal CVBS
6.5"
full screen, dual split
3304
4 PIN Aviation
The monitor supplies power to the camera through the 4 Pin connector.
No other wiring to the camera is required for operation.
The monitor will display the camera image in full screen mode when only one
trigger is activated. For Split Screen Mode both trigger wires must receive
+12vDC at the same time.
If using the Monitor with vehicle side cameras and turn signal activation, be sure
to set the "Trigger Delay" to a minimum of 2 seconds. See menus.
Operation
Monitor Menu Controls:
MENU: Selects Monitor Adjustments
CAM: When in Menu mode Selects Next Screen.
When in normal mode Selects Camera view
After pressing the Power button.
UP: Adjusts Menu Selection Higher
Down: Adjusts Menu Selection Lower
Menus: Press MENU>UP or DOWN>CAM to advance
Picture - Brightness, Contrast, Color, Depth*
Brightness, contrast and Color adjust the overall picture
Depth adjusts individual Camera Images
Press MENU > CAM for next screen
Function - Mirror Flip - Rotates camera image
Trigger Delay - Retains Picture after the trigger is not active
Guide Line - Selects Guide Line On or Off for each camera
Settings - Rotate - Rotates Monitor Screen image
Software Version - For Diagnostics Only
System - Language - Selects Menu Language Zorg North America LLC. 2022 For more information see www.zorg-na.com
Warranty
The Company (Zorg North America) warrants that if this product or any part
there of, under regular use, be proven defective in material or workmanship
within 36 months from the date of original purchase, such defect(s) will be
repaired or replaced with a new or reconditioned product (at the company's
option) without charge for parts and repair labor. Shipping is not covered.
Contact your Vehicle Upfitter, Body or Chassis Builder, or Vehicle
Converter for warranty coverage or information. This product is NOT
covered under the OEM vehicle warranty. Zorg NA will not be responsible
for 3rd party labor charges.
What is not covered? This warranty does not cover the following:
•Damage incurred during shipping or transporting the product to the company or a
service center.
•Elimination of car static or motor noise.
•Defects in cosmetic, decorative or non-operative structural parts.
•Costs incurred for installation, removal, or re-installation of the product or
consequential damage to accessories or vehicle electrical systems.
•Damage caused by improper installation, mishandling, misuse, neglect, accident,
blown fuses, battery leakage, theft, or improper storage.
Notes
+12Vdc
+12Vdc
Monitor will dim automatically with
ambient light conditions.