Zte MF269 User manual

MF269
Let’s go
Getting started with your device.

1
1. Prepare
• A set of installed ODU
• A network cable
• View the label on your device to get the default information. The
following gure is for your reference only.

2
2. Connect Your Device to the POE Adapter
Connect the WAN/LAN1 port and the LAN-IN network port on the POE
adapter with a network cable and make sure the POE adapter has
connected to the ODU already.

3
3. Power on Your Device
Connect the power adapter to power on your device.

4
4. Access the Internet
• Using Wi-Fi: Get the default WLAN SSID and WLAN key (password)
on the label and connect to the Wi-Fi network with your mobile
device and then access the Internet.

5
• Using network cable (RJ45): Connect with the computer via port
LAN2 and access the Internet.

6
5. Change Your Device Settings
You can change the device settings by logging in to the conguration
web page.
1. View the label on your device to get the default Device Manager
Website IP address and Website Password.
2. Launch the Internet browser and enter the Device Manager Website
IP address in the address bar.
3. Input the Website Password and then click Login.
4. After the conguration web page is opened, you can change the
Wi-Fi SSID, password or other settings.

7
WPS Function
Your device supports the WPS function. You can use this function to
connect a client to your device.
1. Press the WPS button on your device to activate the WPS function.
2. Enable the WPS function on your client.
3. Follow the system prompts on your client to establish the
connection.

8
Indicator Lights and Interfaces