Zte Unite III User manual

Quick Start Guide
ZTE Unite™III
U.S. Cellular®Customer Service 1-888-944-9400

LEGAL INFORMATION
Copyright © 2015 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
4G LTE™ is not available in all areas. See uscellular.com/4G for complete coverage details. 4G
LTE™ service provided through King Street Wireless, a partner of U.S. Cellular. LTE™ is a
trademark of ETSI.
SIM Card Limited Warranty
Subject to the exclusions contained below, United States Cellular Corporation (“U.S.
Cellular”) warrants to the original purchaser (“You” or “Your”) of the device with which
the SIM card was provided that the SIM card will be free from defects in material and
workmanship for a period of one (1) year from the date You purchased the device (the
“Warranty Period”). This warranty is not transferable. Should a defect appear during the
Warranty Period, U.S. Cellular will send a replacement SIM card to your address within
the United States without charge provided that you request the replacement SIM card
during or within thirty (30) days following the Warranty Period by calling U.S. Cellular
Customer Service at 1-888-944-9400 (or dialing 611 on your U.S. Cellular handset) or by
visiting a U.S. Cellular retail store.
REPLACEMENT OF THE SIM CARD AS PROVIDED HEREIN IS YOUR
EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY, AND IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OF TITLE, FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, NON-INFRINGEMENT OR ARISING FROM
COURSE OF DEALING OR USAGE OF TRADE. NEITHER U.S. CELLULAR NOR
ANY OF ITS AFFILIATES OR RETAILERS SHALL BE LIABLE TO YOU FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ECONOMIC, EXEMPLARY,
PUNITIVE OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT
LIMITATION, LOSS OF DATA, LOSS OF REVENUE OR PROFITS, DAMAGE TO
PROPERTY OR LOSS OF USE). IN NO EVENT SHALL U.S. CELLULAR’S, ITS
AFFILIATES’ OR RETAILERS’ LIABILITY TO YOU OR ANY THIRD PARTY WITH
RESPECT TO THE SIM CARD EXCEED THE COST OF REPLACING THE SIM
CARD.
THIS LIMITED WARRANTY SHALL BE CONSTRUED UNDER THE LAWS OF
THE STATE OF ILLINOIS, EXCLUDING ITS CONFLICTS OF LAW PROVISIONS.
SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, OR THE DISCLAIMER OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS AND DISCLAIMERS MAY NOT APPLY TO YOU.

No agent, employee, dealer, retailer, representative or reseller is authorized to modify or
extend the terms of this Limited Warranty.
Version No. : 1.0
Edition Time: August 24, 2015

ZTE
Unite III Quick Start Guide
Confidential and Proprietary Information of ZTE CORPORATION 1
Getting Started
The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.
Part Description
Display View device status. Use touch screen gestures (tap, swipe, flick,
etc.) to access menus and additional screens.
SIM Card Slot Install the micro-SIM card.
Micro USB Port
Connect the micro USB cable for charging or tethered
connections.
Battery Cover Remove the battery cover to remove or insert the battery.
Power Key
Toggle power on or off.
Lock Key Press to lock or unlock the LCD screen.

ZTE Unite III
Quick Start Guide
2 Confidential and Proprietary Information of ZTE CORPORATION
Screen Indicators
When the device is powered on, the following icons will appear on the LCD screen, with the
corresponding indicators listed in the table below:
Icon Indication Icon Indication
Network signal strength. Roaming network indication.
Network type. 1X/3G/4G LTE icons will
appear on the LCD screen according to the
network being connected.
T
he device has been connected to
the Internet and the data is been
used.
Battery is low. There are new messages or unread
messages.
Battery is full.
About Your SIM Card
This SIM card will only work with your ZTE Unite III. Once the SIM card has been inserted, do not
remove! If your SIM card is ever separated from your ZTE Unite III or damaged, the device will not
function. If you experience any issues with your ZTE Unite III, contact Customer Service at
1-888-944-9400 or visit your nearest U.S. Cellular®retail location.
Installing the SIM Card
If you have not already done so, please follow these instructions for the installation of your new SIM card
which is in the package:
1. Remove the micro-SIM card from the outer card, being careful not to touch the gold contacts.
2. Open the micro-SIM card slot.

ZTE Unite III Quick Start Guide
Confidential and Proprietary Information of ZTE CORPORATION 3
3. Insert the micro-SIM card into the card slot until it clicks into place.
NOTE:
Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt.
Inserting and Charging the Battery
1. Remove the battery cover and align the battery contacts with the terminals in the battery
compartment as shown. Push the battery down until it clicks into place.
2. Place the battery cover over the battery compartment and press it downward until it clicks into
place.

ZTE Unite III
Quick Start Guide
4 Confidential and Proprietary Information of ZTE CORPORATION
3. Your ZTE Unite III comes with a wall charger. To charge: Plug one end of the wall charger into an
electrical outlet and the other end into the ZTE Unite III’s micro USB port.
NOTE:
The charge time varies depending upon the battery level. The device will stop charging if the
temperature of the battery exceeds 113 °F/45 °C.
Connecting to the Internet
With your ZTE Unite III, a wireless Internet connection can always be at your fingertips
Connecting Wi-Fi Enabled Devices to Your ZTE Unite III
NOTES:
It is recommended the battery be fully charged in order to use your ZTE Unite III via Wi-Fi
for the first time, or connect the device to the wall adapter for power.
Please note upload and download speeds may change depending on the number of deceives
connected to the ZTE Unite III.
The following should occur once you power on your ZTE Unite III:
•Your ZTE Unite III is powered on as soon as you slide the Power key to ON position and the screen
lights up.
Once your ZTE Unite III is powered on and has been activated, it automatically connects to the
Internet, provided that Mobile Broadband service is available, and one or more Wi-Fi devices are
connected.
The Service (4G LTE™, 3G, and 1X), Signal Strength , and Data Connected icons on
your ZTE Unite III indicate it is in service and ready to connect.

ZTE Unite III Quick Start Guide
Confidential and Proprietary Information of ZTE CORPORATION 5
Follow these Steps:
1. Use your normal Wi-Fi application on your computer, or other Wi-Fi enabled device to establish a
connection to your ZTE Unite III.
2. Look for the network (SSID) named “USCC-MF975U-XXXX”. XXXX varies from device to
device.
3. Click Connect and enter the default password printed under the battery of your ZTE Unite III.
NOTE:
You can check the label on your device or check the LCD screen to get the SSID and connection
password.
Device Customization and Configuration
To configure the ZTE Unite III using the Web User Interface, go to http://192.168.1.1 or
http://uscc.hotspot.
Input the default password which is printed under the battery of your ZTE Unite III, and then click Login
to access the Web User Interface. Now, you can customize your ZTE Unite III, such as the configuration
on Internet connection, network selection, WLAN settings, password and security settings, data usage,
etc.
For the details on how to configure the ZTE Unite III with the Web User Interface, please find the ZTE
Unite III User Guide on the U.S. Cellular®website at uscellular.com.

ZTE Unite III
Quick Start Guide
6 Confidential and Proprietary Information of ZTE CORPORATION
Navigating the Device
Slide the Power key to ON position to turn on the ZTE Unite III. The screen lights up to indicate the
device has turned on and the following icons will appear after initialization:
NOTE:
You need to touch the data usage information on the middle of the device screen to turn on
the data usage plan and configure you data usage directly.
Wi-Fi Settings
Click to configure your Wi-Fi settings. Slide the screen up or down to view the following
information:
Wi-Fi: Slide to enable or disable Wi-Fi function.
Main Wi-Fi Network:Displays the main default Wi-Fi network.
Guest Wi-Fi Network: Displays the guest default Wi-Fi network.
WPS: You can pair the devices to launch the Wi-Fi Protection Setup.
Connected Devices: Displays the connected devices information.
Max Wi-Fi Devices: The maximum connected Wi-Fi number is 15.
Wi-Fi Band: Select desired frequency for your device.
Wi-Fi Range: Select Wi-Fi ranges for your device.
Wi-Fi Sleep Mode: Select the length of time for your Wi-Fi signal broadcast to remain active.
Messages
Click to check the information of your messages.

ZTE Unite III Quick Start Guide
Confidential and Proprietary Information of ZTE CORPORATION 7
Settings
Click to check the settings.
Allow Mobile Data: Slide Standard Data to ON position to turn on mobile data.
Data Roaming: Slide Data Roaming to ON position to turn on mobile data when roaming.
Additional roaming data charges may apply.
Data Usage: Slide Data Usage Limit to ON position to turn on your data usage limit and configure
your data plan.
Network Select: Select the network type.
Messages: Touch Enable / Disable to receive text messages during power up.
Display: Set screen brightness, display timeout and Wi-Fi information on home screen.
Lock Screen(PIN): Touch to set a PIN code to lock your screen.
Dial *228: Active your SIM card manually in network.
Software Update: Update the software.
Factory Reset: Erase all data on device and restore the device to its factory default settings.
About Your Device: Check the device information.