Zukt FLZ-100W User manual

Mack Marshall Lighting Pty Ltd
PO Box 7, Lonsdale
South Australia, 5160
zükt www.zukt.com.au
LED Flood Light - Installation Instructions FLZ-100W
PLEASE ENSURE THAT YOU INSTALL AND USE THIS PRODUCT ACCORDING TO
THE INSTRUCTIONS BELOW TO ENSURE CORRECT INSTALLATION AND NORMAL
FUNCTIONING OF YOUR zükt LED Flood Light PRODUCT.
Cautions
1. Please read this guide carefully before installing or maintaining this equipment.
2. Do not change or tamper with any internal electric circuits for any reason.
3. Please do no insert any objects of any kind into the LED product to avoid an electric shock,
malfunction or damage of the products.
4. Designed for industrial and commercial use only.
Installation
1. Easy to install.
2. Fasten to wall, ceiling or ground with bracket, securing with bolt (not included).
3. Included is a 1 .8 metre flex with 3 pin, 240V, 7.5amp main plug.
Congratulations on the purchase of your new zükt LED product!
Internal inline fuse fitted - 2.0A
Not for use with any fluorescent lamps
Use only zükt T1012 Series lamps
www.zukt.com.au
WARNING
zükt

Mack Marshall Lighting Pty Ltd
PO Box 7, Lonsdale
South Australia, 5160
zükt www.zukt.com.au
LED Flood Light - Installation Instructions FLZ-200W
PLEASE ENSURE THAT YOU INSTALL AND USE THIS PRODUCT ACCORDING TO
THE INSTRUCTIONS BELOW TO ENSURE CORRECT INSTALLATION AND NORMAL
FUNCTIONING OF YOUR zükt LED Flood Light PRODUCT.
Cautions
1. Please read this guide carefully before installing or maintaining this equipment.
2. Do not change or tamper with any internal electric circuits for any reason.
3. Please do no insert any objects of any kind into the LED product to avoid an electric shock,
malfunction or damage of the products.
4. Designed for industrial and commercial use only.
Installation
1. Easy to install.
2. Fasten to wall, ceiling or ground with bracket, securing with bolt (not included).
3. Included is a 1 .8 metre flex with 3 pin, 240V, 7.5amp main plug.
Congratulations on the purchase of your new zükt LED product!
Internal inline fuse fitted - 2.0A
Not for use with any fluorescent lamps
Use only zükt T1012 Series lamps
www.zukt.com.au
WARNING
zükt

Mack Marshall Lighting Pty Ltd
PO Box 7, Lonsdale
South Australia, 5160
zükt www.zukt.com.au
LED Flood Light - Installation Instructions FLZ-70W
PLEASE ENSURE THAT YOU INSTALL AND USE THIS PRODUCT ACCORDING TO
THE INSTRUCTIONS BELOW TO ENSURE CORRECT INSTALLATION AND NORMAL
FUNCTIONING OF YOUR zükt LED Flood Light PRODUCT.
Cautions
1. Please read this guide carefully before installing or maintaining this equipment.
2. Do not change or tamper with any internal electric circuits for any reason.
3. Please do no insert any objects of any kind into the LED product to avoid an electric shock,
malfunction or damage of the products.
4. Designed for industrial and commercial use only.
Installation
1. Easy to install.
2. Fasten to wall, ceiling or ground with bracket, securing with bolt (not included).
3. Included is a 1 .5 metre flex with 3 pin, 240V, 7.5amp main plug.
Congratulations on the purchase of your new zükt LED product!
Internal inline fuse fitted - 2.0A
Not for use with any fluorescent lamps
Use only zükt T1012 Series lamps
www.zukt.com.au
WARNING
zükt