ZyXEL Communications N220 - User manual

USB wireless network adapter
Easy Setup Guide
N220
Quick Start Guide x 1 Support CD x 1
USB cable x 1
Contents:
N220 adapter x 1
Step 1
Overview
The N220 is a USB wireless network adapter for your computer. The N220 is compatible
with WPS (Wi-Fi Protected Setup).
A
B
The following table describes the N220
LABEL DESCRIPTION
ALED and also a WPS button
B USB connector
Step 2
Install the Software
1. Insert the included CD into the CD-ROM drive
on your computer
3. Follow the on-screen instructions to install
both the ZyXEL utility and the device driver.
Alternatively, install the driver only and use
Windows WLAN conguration tool to congure
the N220 with Windows XP, Windows Vista
or Windows 7. See the User's Guide for more
information.
4. You will need to restart your computer after
installing the ZyXEL utility and driver. Make sure
you have saved your work before continuing.
2. When the following screen displays, click Next
to install the ZyXEL utility and driver.
If the screen does not display, locate and double-
click an .exe le in the Setup folder on the CD.

Step 3
Install the Hardware
1. Locate an available USB port on the computer.
2. Insert the N220 into an available
USB port on the computer
The N220's Dual-function LED
and WPS activation button turns
on if it is properly inserted.
Never bend, twist or force the N220 into the port. If there is not
enough space to attach the N220, use the included USB cable.
when inserting indicate the LED/button goes up (in a system where
the USB port is horizontal) or toward the user (in a system where the
USB port is vertical)
Note:
Step 4
Connect with WPS
To connect wirelessly to an Access Point (AP) with the N220, use the WPS button.
1. Place a WPS-enabled AP within range of the N220.
2. Press the WPS activation button on both devices for
between one and three seconds. It doesn't matter
which button is pressed rst. You must press the
second button within two minutes of pressing the rst
one. The LED ashes steadily once they are connected.
See the User's Guide for information about how to manually connect to a wireless
device using the ZyXEL utility.