ZyXEL Communications OMC-2301 User manual

www.zyxel.com
OMC-2301
GEPON OLT Management Card
User’s Guide
Version 3.60
11/2007
Edition 1

About This User's Guide
OMC-2301 User’s Guide 3
About This User's Guide
Intended Audience
This manual is intended for people who want to configure the OMC-2301 GEPON (Gigabit
Ethernet Passive Optical Network) OLT (Optical Line Terminal) Management Card using the
web configurator or via commands. You should have at least a basic knowledge of TCP/IP
networking concepts and topology.
Related Documentation
• OLT-2300 User’s Guide
Refer to the OLT-2300 User’s Guide for directions on installation, connections,
maintenance, hardware trouble shooting and safety warnings.
• OLC-2301 Line Card User’s Guide
This user’s guide introduces the GEPON OLT line card and gives detailed information
about the line card features and hardware.
• ZyXEL Web Site
Please refer to www.zyxel.com for additional support documentation and product
certifications.
User Guide Feedback
Help us help you. Send all User Guide-related comments, questions or suggestions for
improvement to the following address, or use e-mail instead. Thank you!
The Technical Writing Team,
ZyXEL Communications Corp.,
6 Innovation Road II,
Science-Based Industrial Park,
Hsinchu, 300, Taiwan.
E-mail: [email protected]

Document Conventions
OMC-2301 User’s Guide
4
Document Conventions
Warnings and Notes
These are how warnings and notes are shown in this User’s Guide.
1Warnings tell you about things that could harm you or your device.
"Notes tell you other important information (for example, other things you may
need to configure or helpful tips) or recommendations.
Syntax Conventions
• The OMC-2301 GEPON OLT Management Card may be referred to as the “OMC-2301”,
the “OMC”, the “management card”, the “device” or the “system” in this User’s Guide.
• “OLT-2300” refers to the OLT-2300 system including the main chassis and their cards.
The OLT-2300 may be referred to as the “OLT”.
• The “OLC-2301”, the “OLC” or the “line card” refers to the OLC-2301 GEPON OLT
Line Card.
• The OLT-2300M is the OLT-2300 main chassis. It may be referred to as the “main
chassis”.
• The OPA-2300 is the power card. It may be referred to as the “power card”
• The OFC-2300 is the fan module. It may be referred to as the “fan module”
• Product labels, screen names, field labels and field choices are all in bold font.
• A key stroke is denoted by square brackets and uppercase text, for example, [ENTER]
means the “enter” or “return” key on your keyboard.
• “Enter” means for you to type one or more characters and then press the [ENTER] key.
“Select” or “choose” means for you to use one of the predefined choices.
• A right angle bracket ( > ) within a screen name denotes a mouse click. For example,
Maintenance > Log > Log Setting means you first click Maintenance in the navigation
panel, then the Log sub menu and finally the Log Setting tab to get to that screen.
• Units of measurement may denote the “metric” value or the “scientific” value. For
example, “k” for kilo may denote “1000” or “1024”, “M” for mega may denote “1000000”
or “1048576” and so on.
• “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other words”.

Document Conventions
OMC-2301 User’s Guide 5
Icons Used in Figures
Figures in this User’s Guide may use the following generic icons.
OLT-2300 Computer Server
Switch Router Internet
Central Office/ISP ONU Splitter

Safety Warnings
OMC-2301 User’s Guide
6
Safety Warnings
1For your safety, be sure to read and follow all warning notices and instructions.
For your safety, be sure to read and follow all warning notices and instructions.
• Do NOT use this product near water, for example, in a wet basement or near a swimming
pool.
• Do NOT expose your device to dampness, dust or corrosive liquids.
• Do NOT store things on the device.
• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk
of electric shock from lightning.
• Connect ONLY suitable accessories to the device.
• Do NOT open the device or unit. Opening or removing covers can expose you to
dangerous high voltage points or other risks. ONLY qualified service personnel should
service or disassemble this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Use ONLY an appropriate power adaptor or cord for your device.
• Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in
North America or 230V AC in Europe).
• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the
product where anyone can walk on the power adaptor or cord.
• Do NOT use the device if the power adaptor or cord is damaged as it might cause
electrocution.
• If the power adaptor or cord is damaged, remove it from the power outlet.
• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a
new one.
• Do not use the device outside, and make sure all the connections are indoors. There is a
remote risk of electric shock from lightning.
• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your
device.
• Refer also to the OLT-2300 User’s Guide and follow all safety warnings for installation,
connections, maintenance and hardware trouble shooting.
• Warning! To avoid risk of electric shock, remove only one card at a time and do not place
fingers or objects inside the chassis. Cover empty slots with slot covers.
This product is recyclable. Dispose of it properly.

Safety Warnings
OMC-2301 User’s Guide 7

Safety Warnings
OMC-2301 User’s Guide
8

Contents Overview
OMC-2301 User’s Guide 9
Contents Overview
Introduction ............................................................................................................................ 25
Introducing the OMC ................................................................................................................. 27
Hardware ................................................................................................................................... 31
Basic Setup ............................................................................................................................ 35
The Web Configurator ............................................................................................................... 37
Initial Setup Example ................................................................................................................. 43
System Status and Port Statistics ..............................................................................................47
Basic Setting ............................................................................................................................. 57
Advanced ................................................................................................................................ 77
Classifier Filter Profile ................................................................................................................ 79
VLAN Profile .............................................................................................................................. 83
Priority Profile ............................................................................................................................ 93
Static MAC Forward Setup ........................................................................................................ 97
Destination Filter ...................................................................................................................... 101
Port Authentication .................................................................................................................. 105
Access Control ........................................................................................................................ 109
Management ......................................................................................................................... 121
Maintenance ............................................................................................................................ 123
Diagnostic ................................................................................................................................ 131
Syslog ...................................................................................................................................... 133
MAC Table ............................................................................................................................... 137
IGMP Table .............................................................................................................................. 141
Commands, Troubleshooting and Specifications ............................................................ 143
Introducing the Commands ..................................................................................................... 145
Command Examples ...............................................................................................................175
Troubleshooting ....................................................................................................................... 191
Product Specifications ............................................................................................................. 203
Appendix and Index .............................................................................................................207

Contents Overview
OMC-2301 User’s Guide
10