ZyXEL Communications P-2602HWUDL-D User manual

Copyright © 2007. All rights reserved.
P-2602HWUDL-D
802.11g Wireless ADSL VoIP IAD
with Built-in DECT Base Station
Quick Start Guide
Version 3.40
8/2007
Edition 1
DEFAULT LOGIN
IP Address http://192.168.1.1
Password 1234

P-2602HWUDL-D Quick Start Guide
1
Overview
The P-2602HWUDL-D model is a router which combines high-speed ADSL Internet
access, a built-in switch, a firewall and high-speed wireless networking capability. It also
has a built-in DECT GAP base station for compatibility with DECT cordless phones, USB
2.0 ports for sharing files via USB compatible storage devices and one phone port for
making calls over the Internet (Voice over IP or VoIP). The P-2602HWUDL-D can use
regular phone services through regular (PSTN) phone lines and can also function as a
print server.
1 Requirements
Make sure you have the following things before you set up your P-2602HWUDL-D.
• Internet access - account information provided by your ISP, such as user name, password,
and so on.
• VoIP account - You need the account information provided by your VoIP service provider
(the company that lets you make phone calls over the Internet).
• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.
"See the User’s Guide for all configuration details including file sharing and
setting up a shared printer.

P-2602HWUDL-D Quick Start Guide
2
To read the User’s Guide insert the CD that came in the box into your CD-ROM drive. A
screen should pop up. Navigate to the User’s Guide from this screen. If a screen does not
pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually
drive D:) and navigate to it from there.
2 Hardware Connections
1DSL: Use a telephone wire to connect this port to the DSL or MODEM jack on a splitter.
2LINE: Use the green PSTN cable to connect the TEL or PHONE jack on the splitter to this
port. Connect the splitter to a telephone jack.

P-2602HWUDL-D Quick Start Guide
3
"When the ZyXEL Device does not have power, the phone(s) connected to
the PHONE port can still be used for making PSTN calls.
3 PHONE: Use a telephone cable (and any telephone adaptor provided with your P-
2602HWUDL-D) to connect your telephone to this port.
4 USB 2.0: Connect a USB (version 2.0 or lower) memory stick for file sharing. The P-
2602HWUDL-D automatically detects the USB device.
5USB2.0: Use a USB cable (not provided) to connect a USB (version 2.0 or lower)
printer to this port.
6 ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial
configuration and/or Internet access.
7Use the power adaptor provided with your P-2602HWUDL-D to connect an appropriate
power source to this socket.
8Push the power switch to the on position.
Look at the LEDs (lights) on the top panel of the P-2602HWUDL-D.
•ThePOWER light blinks during start-up and is green once the P-2602HWUDL-D is ready.
• Each ETHERNET light turns on if the corresponding ETHERNET port is properly con-
nected. The lights blink when the P-2602HWUDL-D is sending or receiving data through
the corresponding ETHERNET port.
•TheDSL light stays on if a physical connection with your DSL modem exists and blinks
when transmitting data. The INTERNET light stays on when Internet access is available.
•ThePHONE lights stay on when your SIP account is registered and they blink if the
receiver is off the hook.
•TheWLAN light turns on when the wireless LAN is ready. It blinks when the P-
2602HWUDL-D is sending/receiving data through the wireless LAN.
•TheUSB light turns on when there is a USB device (printer or memory stick) connected to
the P-2602HWUDL-D.

P-2602HWUDL-D Quick Start Guide
4
If the PHONE light is on, skip to Section 6to see how to make calls through the Internet.
If the INTERNET light comes on but the PHONE light is off, go to Section 4.3 and use the
VOICE OVER INTERNET SETUP wizard.
If the INTERNET light is off but the DSL light is on, go to Section 4and use the INTERNET/
WIRELESS SETUP to configure your Internet access settings.
VCheck your connections if an LED does not turn on. Then turn the P-
2602HWUDL-D off, wait for a few seconds and turn it back on. See
Troubleshooting. If the problem remains, contact your local vendor.
3 DECT Phone Registration
In order to use your DECT phone with the P-2602HWUDL-D, the DECT phone must
register with the P-2602HWUDL-D’s DECT base station. Take the following steps to
register your DECT phone with the P-2602HWUDL-D.
1Press down the DECT base station button ( ) on the left side (when facing the LEDs
(lights)) of your P-2602HWUDL-D for 6 to 11 seconds. When the DECT light begins to
blink, the P-2602HWUDL-D is in registration mode. The P-2602HWUDL-D in
registration mode for 25 to 30 seconds. Your DECT phone must be registered within the
time period.
"If you press the DECT base station button for 12 seconds or more, the
DECT base station resets and all previously registered DECT phones must
be re-registered.

P-2602HWUDL-D Quick Start Guide
5
2Put your DECT phone in registration mode. Refer to your DECT phone documentation.
When the P-2602HWUDL-D is in registration mode, the DECT light blinks and the P-
2602HWUDL-D starts to scan its surrounding area for DECT phones in registration mode.
"To ensure clear communication between the two devices, make sure your
DECT phone is within range of the P-2602HWUDL-D during the registration
process. See the User’s Guide for details.
3When a P-2602HWUDL-D discovers a DECT phone in registration mode, it sends a
request for a Personal Identification Number (PIN). Your DECT phone receives the
request and prompts you to enter the PIN. Enter the PIN in the DECT phone by using
the handset keypad. Entering a PIN ensures that only authorized DECT phones
connect to and use your P-2602HWUDL-D to make and receive calls.
"The default PIN of the P-2602HWUDL-D is 1234.
4Repeat steps 1 - 3 to register additional phones.
"You can register up to 6 DECT phones with the P-2602HWUDL-D.

P-2602HWUDL-D Quick Start Guide
6
Once your DECT phones are registered with the P-2602HWUDL-D you can assign SIP
accounts to make and receive VoIP calls. You can also use DECT phones to make internal
calls, see your DECT phone documentation for more information. Internal calls are calls
between DECT phones registered with the P-2602HWUDL-D. For the P-2602HWUDL-D
you can also assign your DECT phones to receive calls from the PSTN line (regular phone
line).
4 Initial Configuration
1Open your browser and enter the P-
2602HWUDL-D's IP address
192.168.1.1 (default) as the URL.
2Enter the admin password 1234
(default). Click Login.
If your browser cannot find this screen,
make sure your browser is configured
correctly. See Troubleshooting in the
User’s Guide for details.
3Follow the directions in this screen. 4Click Apply to replace the P-
2602HWUDL-D’s default digital
certificate.

P-2602HWUDL-D Quick Start Guide
7
4.1 Internet/Wireless Setup
The connection wizard helps you set up your Internet connection as well as your wireless
settings.
1Click INTERNET/WIRELESS
SETUP.
Wait while the P-2602HWUDL-D
tries to detect your Internet
connection. If the P-
2602HWUDL-D cannot detect
your Internet connection, follow
the directions. Enter the
information provided by your ISP.
Keep the default settings if your
ISP did not provide some
information.
To create a wireless network the
P-2602HWUDL-D and your wireless computer(s) must all use the same SSID (network
name), channel and security settings.
If you do not set wireless security, any one within range could use your P-2602HWUDL-D
to access your network and the Internet.
Make sure your wireless security settings are compatible with your existing wireless
devices. See the User’s Guide for more information on wireless networks.
2When your Internet connection is setup correctly, the DSL LED should be green. When
you are finished click Return to Wizard Main Page.
.
5Click Go to Wizard setup.

P-2602HWUDL-D Quick Start Guide
8
"Enter the Internet access information exactly as given to you by your ISP in
each wizard screen and then click Next to continue or click Back to return
to the previous screen.
"Current screen information will be lost if you click Back.
4.2 Setting Up a Wireless Network
To set up a wireless network you need at least one wireless network card/adapter.
• If you have a desktop computer, use either a wireless USB adapter or a wireless PCI
adapter.
• If you have a laptop, use either a wireless USB adapter or a wireless CardBus card. These
are built into many laptops.
To add a computer to your network you need to configure your wireless-enabled computer
with the same SSID, channel and security settings as the P-2602HWUDL-D.
Alternatively, use OTIST, ZyXEL’s One-Touch Intelligent Security Technology (OTIST)
feature. It allows you to automatically configure the SSID and WPA-PSK on all OTIST-
equipped wireless clients within range of the P-2602HWUDL-D. See the wireless LAN
chapter in the User’s Guide for more information on OTIST.
4.3 Configure VoIP
Click VOICE OVER INTERNET
SETUP.
"You should have the
information provided by
your VoIP service
provider.

P-2602HWUDL-D Quick Start Guide
9
Enter the information provided by your VoIP service provider. Keep the default settings if
your VoIP service provider did not provide some information. If you have a SIP account like
[e-mail], the SIP Number is 1234567, and the SIP Service Domain is
VoIP-provider.com. When you are done, the PHONE light should be on. Close the wizard
and the main screen opens.
5 Regular Phone Line Setup
When one of your VoIP accounts is registered, the P-2602HWUDL-D normally uses the
Internet (not the regular phone line) to make phone calls. Follow the directions in this
section to make sure you can also use the regular phone line while one of your VoIP
accounts is registered.
"When the ZyXEL Device does not have power, the phone(s) connected to
the PHONE port can still be used for making PSTN calls.
In the main screen, click VoIP >
PSTN Line.
PSTN Line Pre-fix Number:
Enter a prefix (up to seven
numbers) you dial before you dial
the phone number, if you want to
make a regular phone call while
one of your SIP accounts is
registered. These numbers tell the
P-2602HWUDL-D that you want to
make a regular phone call.
Relay to PSTN Line: Enter phone
numbers for regular phone calls (that do not use the Internet) that you always want to dial
without the prefix number. For example, enter emergency phone numbers here.
Click Apply.
6 Make Phone Calls
Follow these directions to make calls over the Internet.