ZyXEL Communications P-660HN-T1A User manual

How to set up Wireless on Zyxel P-660HN-T1A Router Modem
1. Setting up Wireless LAN
1.1.The AP (Access Point) Security Key Default is WEP 5-digit should be changed
to WPA for higher security

1.2.WPS (Wi-Fi Protected Setup)
Select Enable WPS then click Apply
1.2.1. Wireless power button
Press and hold for 1-2 seconds to turn on/off the Wireless
TThe Security Mode is
WPA2
And the Encryption is AES
for the highest security

1.2.2. WPS using
When you turned on WPS Function on Wireless Computer with Windows
7 or a computer with the Wireless USB in stalled that supports WPS, you
can access Zyxel router without entering Passkey. Simply trying to
connect to the Router by pushing the button on the router.
1.3. WPS Station
The user “admin”can control a router by pushing Button for others to use this router
as follows:
1.3.1. Those who want to use the Router (Using wireless computer and
Windows 7) when trying to connect will see as shown

1.3.2. Besides the admin or the router’s user can push a Button to connect the
internet from Zyxel router, they can change from pushing the hardware to
“Push Button”at the Software as shown.