ZyXEL Communications P-330W Instruction Manual

1/5
ZyXEL P-330W Standard Version
Release 1.8
Release Note
Date: May 14, 2007
Supported Platforms:
ZyXEL P-330W
Versions:
Firmware Version: V1.8
Notes:
1. Default LAN IP: 192.168.10.1.
2. Default username/password: admin/1234.
3. Randomize NTP server query priority at every boot-up time.
4. Firmware upgrade did not support FTP or TFTP utility.
5. Some Firmware upgrades reset the router’s configuration options to the factory
defaults. Before performing an upgrade, remember to backup you current
configuration first.
Modification in 1.8 | 05/14/2007
Convert version string from “1.8_b11” to “1.8”
Modification in 1.8_b11 | 05/14/2007
1. [BUG FIXED]
Fixed some certain Internet web pages stall issue.
2. [BUG FIXED]
Fixed WAN port disconnected issue under CM system.
3. [BUG FIXED]
Fixed NDS wireless connection compatibility issue.
4. [BUG FIXED]
Fixed WPA-PSK compatible issue with G-405.
5. [BUG FIXED]
Fixed the issue that UPnP can’t work after LAN interface rejoin it.
6. [FEATURE ENHANCED]
Supported compatible with XBOX Live connection.
7. [FEATURE ENHANCED]
Added “Release IP” and “Renew IP” buttons in “Connection Details” in DHCP
Client of WAN access type.
Modification in 1.7 | 08/10/2006
1. Convert version string from “1.7_b12” to “1.7”

2/5
Modification in 1.7_b14 | 08/09/2006
1. [BUG FIXED]
Fixed the issue that P-330W wireless client mode could not connect to B+G mode
AP when P-330W’s band is set to 2.4 GHz (B) or (G).
2. [BUG FIXED]
Fixed the UPnP security issue that to check to see if initial IP actually originates
from the LAN.
3. [BUG FIXED]
Fixed the issue that WAN port IP information can’t update when lose Ethernet
cable signal.
4. [FEATURE CHANGED]
Changed default LAN IP from 192.168.1.1 to 192.168.10.1.
5. [FEATURE CHANGED]
Changed the URL Filtering function to filter the keyword in whole URL not
Domain address only.
6. [FEATURE ENHANCED]
Added static IP leasing function based of MAC address on LAN DHCP server.
7. [FEATURE ENHANCED]
Added an exemption IP range function to URL Filtering.
8. [FEATURE ENHANCED]
Added service name field to PPPoE WAN type configuration.
9. [FEATURE ENHANCED]
Added Pure Network’s HNAP protocol.
10. [FEATURE ENHANCED]
Added fast PPTP module to speed up the transmission rate in PPTP mode.
11. [FEATURE ENHANCED]
Added logging when a local IP (not belong to the exemption IP range) tries
to access any one of the filtered URLs.
12. [FEATURE ENHANCED]
Added WDS function.
13. [FEATURE ENHANCED]
Added Pure Network’s router setup application in CD contents.
Modification in 1.6 | 05/04/2006
Convert version string from “1.6_b6” to “1.6”
Modification in 1.6_b6 | 05/03/2006
1. [BUG FIXED]
Fixed the issue that user could not save PPPoE user name successfully when the
length is more than 30 characters.
2. [FEATURE CHANGED]
Modified the firewall rule to mark ports of system stealthed and let ports be
invisible to the others on the Internet.
3. [FEATURE ENHANCED]
Supported 40 bits, 50 bits and 128 bits encryption for MPPE of MS-CHAP V1 and
V2 authentication in PPTP.
4. [FEATURE ENHANCED]

3/5
The user’s configuration will NOT be erased after upgrading further firmware
(V1.7 or later).
Still need to backup user’s configuration manually when upgrading firmware from
V1.5 to V1.6.
Modification in 1.5 | 01/27/2006
Convert version string from “1.5_b4” to “1.5”
Modification in 1.5_b4 | 01/24/2006
1. [BUG FIXED]
Prevented system from being crashed when wireless client use smaller
fragment/RTS threshold and fix the compatibility issue with wireless client.
2. [BUG FIXED]
Fixed the Internet connection issue after running P2P utility for several hours.
3. [BUG FIXED]
Modified the firewall script ruls to prevent from changing source IP address while
running virtual server.
4. [BUG FIXED]
Prevented from keying in duplicate/empty DNS info into system (PING/Diagnostic
function will not work fine if system got empty DNS info.
5. [FEATURE ENHANCED]
Supported PPTP MS-Chap V1/V2 authentication.
Modification in 1.4 | 09/27/2005
Convert version string from “1.4_b1” to “1.4”
Modification in 1.4_b1 | 09/25/2005
1. [FEATURE ENHANCED]
Added “Daylight Saving” function.
2. [FEATURE ENHANCED]
Added “Respond to WAN Ping” function.
Modification in 1.3 | 09/08/2005
Convert version string from “1.3_b1” to “1.3”
Modification in 1.3_b1 | 08/29/2005
1. [BUG FIXED]
Fixed UPnP issue.
2. [BUG FIXED]
The connections of all LAN clients will be disconnected automatically after the
parameters of LAN interface be modified and applied. In order to let all LAN
clients to learn and update their new IP information automatically after the
connection reestablish.
3. [BUG FIXED]
The DDNS information will be updated automatically whenever WAN IP change.
4. [FEATURE ENHANCED]
Added “Special Applications” function.

4/5
5. [BUG FIXED]
Fixed DNRD (Domain Name service Relay Demand) issue.
Modification in 1.2 | 08/16/2005
Convert version string from “1.2_b1” to “1.2”
Modification in 1.2_b1 | 08/09/2005
1. [BUG FIXED]
Increased PPPoE user name length from 30 to 60 characters.
2. [BUG FIXED]
Fixed WAN host can't login DUT after change LAN IP address or DHCP client
range via WAN host.
3. [FEATURE ENHANCED]
Added progress indicator during saving Wireless WEP Key settings.
4. [FEATURE ENHANCED]
Added “AES” in WPA encryption method.
5. [FEATURE CHANGED]
Modified firmware version rule. The first version “4.2.1.6.6e.” will be regarded as
“V1.0” and the second version “4.2.1.6.8e” will be regarded as “V1.1”.
Modification in 4.2.1.6.8e | 07/26/2005
Convert version string from “4.2.1.6.8e_b5” to “4.2.1.6.8e”
Modification in 4.2.1.6.8e_b5 | 07/22/2005
1. [BUG FIXED]
In Wireless WEP Key Setup page, fixed the key format (ASCII/Hex) chaos.
2. [BUG FIXED]
Fixed URL filter malfunction when the URL string length is shorter than the listed
items.
3. [BUG FIXED]
Fixed the interference between checkbox input fields in System Log page.
4. [BUG FIXED]
Fixed Web-UI lock up in sometime after pressing the hardware reset button.
5. [BUG FIXED]
Fixed Web-UI lock up during PPTP trying to dial-up to service.
6. [BUG FIXED]
Corrected the PPPoE/L2TP idle time to more accuracy.
7. [BUG FIXED]
Corrected the consistence between WPA authentication radio buttons whenever
802.1x authentication was checked in Wireless Security Setup page.
8. [BUG FIXED]
Corrected the compatibility between P330W and G-405/G-405v2 in wireless
WPA/WPA2 encryption.
9. [FEATURE CHANGED]
Corrected the UPnP device name from "Untitled" to "ZyXEL P330W".
10. [FEATURE ENHANCED]
When LAN IP address is changed, create a new link on page and redirect user to

5/5
new IP address for next configure web session.
11. [BUG FIXED]
Prevented user from uploading the backup config file in the Upgrade Firmware
page for firmware upgrading.
12. [BUG FIXED]
Corrected wireless band consistency in both pages of Wireless Basic Setting and
Wizard in wireless client mode.
Modification in 4.2.1.6.6e. | 06/03/2005
First Firmware Released