1 BY ONE Naturalife User manual

1byone Products Inc.
1230 E Belmont Street, Ontario, CA 91761
Customer Service: [phone]
www.1byone.com
Air Purier
Instruction Manual

1
Introduction
Thank you for purchasing NATURALIFE Air Purifier.This instruction manual contains
important information about safety, usage and disposal. Use the product as described
and keep this manual for future reference. If you sell this air purifier or pass it on, also
give this manual to the new owner.
Important Safety Instructions
When using electrical products (especially when children are present), basic safety
precautions should always be followed.
WARNING – To reduce the risk of electric shock, fire or injury to persons:
• This product is not intended for use by people with limited physical, sensory or
mental abilities, or persons without required knowledge or experience. Product use
by such people is allowed only under the supervision of a guardian responsible for
their safety, with the guardian providing clear instructions on device's operation.
• Unpack all parts and remove all protective packaging materials before using. Check
that all the filters are correctly installed before using the air purifier.
• Place the air purifier on a flat, firm, stable surface. Do not place on the edge of a
table or on a tilted surface so as to avoid accidental falls and damage to the purifier.
• It is recommended to plug the air purifier into an individual electric outlet and not
into an extension cord or power strip as this may overload the cord or strip and
cause a fire hazard or electric shock. Using an outlet with inappropriate voltage will
damage the air purifier and may cause injury to the user.
• Make sure the power cable is visible at all times to avoid stepping on or tripping
over it.
• Do not operate the purifier without filters or with damaged filters.
• Always switch off the purifier before attempting to open its cover and remove the
filters.
• Do not block the air inlet and outlet as this may cause overheating and result in
malfunction. Keep the purifier away from curtains and similar objects that may
block its inlets and outlets. A minimum distances of 11.8” (30cm) should surround
the purifier to allow for sufficient ventilation.
• To avoid a shortened life span or damage to the air purifier, do not use the purifier
with parts or accessories not officially provided.Doing so will void the purifier’s
product warranty.
• Never operate the purifier without supervision or when away from the premises.
Children should be supervised by a responsible adult to ensure they do not play
with the purifier.
• Do not insert fingers or any other foreign objects into the air outlet to avoid injury
to the user and damage to the product.
• Periodically check the purifier’s power cord. If the power cord is damaged, do not
use the purifier and have the power cord replaced by a qualified technician.

2 3
• The air purifier is not designed for outdoor use nor in high extremely high humidity
areas such as bathroom. It is designed for normal indoor use only.
• Do not operate the air purifier in areas containing gasoline, paint or flammable
liquids. Keep the purifier away from objects or areas producing heat, such as vents,
radiators, and enclosed entertainment systems, as this can cause damage to the
purifier and hazard to the user.
• Do not operate the air purifier when indoor smoke-type insect repellents have
been used or in places with oily residues, burning incense or chemical fumes.
• Only use the air purifier as described in this manual.
• Do not attempt to fix the purifier yourself when it is not functioning.There are no
user-serviceable parts inside the product. Unauthorized dismantling or servicing
will void the product’s warranty. Refer servicing to qualified personnel only.
• Always unplug the purifier after use.When unplugging the power cord, grasp and
pull the plug directly; never pull on the cord itself.
• Unplug the purifier before cleaning, repairing or moving it. Do not use aggressive
or harsh detergents or soaps to clean the purifier as these may cause scratches and
damage its surface.
• Do not immerse the purifier or its power cord in liquids.
• When the purifier is not in use, put it back in its box and store it in a safe, cool, dry
place away from direct sunlight.
• This air purifier is for household, non-commercial use only.
FCC
Please note that changes or modifications of this product is not expressly approved
by the party responsible for compliance could void the user's authority to operate the
product.
NOTE: This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.This product generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or television
reception, which can be determined by turning the product off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Instructions for Placement
• When using the air purifier, place it at least 6.6ft (2m) away from equipment
producing electric waves such as televisions, radios and wave clocks, as these can
cause electrical interference.
• Do not place the air purifier where its sensor is directly exposed to wind as this may
affect normal operation.
• Do not place the air purifier's inlets or outlets in very close proximity to curtains; the
air purifier may become dirty, malfunction, and/or become a hazard.
• Do not expose the air purifier to condensation caused by big temperature changes.
Operate the purifier only within temperatures between 32°F-95°F (0°C-35°C).
• Do not operate the air purifier in extremely humid environments such as
bathrooms, as extreme humidity may shorten the lifespan of the purifier’s parts and
filters.
• Place the air purifier in an area with high airflow circulation to ensure ions are
distributed to all corners of the room. Do not place it on a heavily carpeted area as
this may cause slight vibrations during operation.
• The wall behind the purifier’s air outlet may become dirty over time. Use a plastic
sheet to cover the wall directly behind the outlet to avoid dirt buildup. Periodically
clean the wall area if needed.
• Do not place the air purifier in areas that may easily get smoky such as kitchens.
If the air purifier is operated in a smoky environment for a long period, clean or
replace the filters more frequently to ensure continued effective filtration.

4 5
Product Description
1. Control Panel
2. Light Sensor
3. Air Quality Sensor
4. Activated Carbon Filter
5. HEPA Filter
6. Pre-filter
7. Housing Cover
Included Items
1 x Naturalife Air Purifier
1 x Activated Carbon Filter
1 x HEPA Filter
1 x Pre-filter
1 x Instruction Manual
Before using the Naturalife Air Purifier for the first time, check the package contents to
ensure all parts are free of visible damage.
Getting Started
Removing the Air Purifier
1. Open the packaging and remove the air purifier from the package without opening
the plastic wrapping encasing the purifier. Once outside the package, open the
plastic wrapping.
2. Open the air purifier’s housing cover and take out all the filters (refer to the
“Installing/Replacing Filters”section of this for further instruction). Remove the
plastic wrapping from all the filters and install them back in the purifier.
Setting Up the Air Purifier
Note: Only carry and reposition the air purifier using its rear handle.
1. Place the air purifier on a firm, level surface to prevent vibrations and noise. Keep a
distance of at least 11.8”(30cm) clearance on all sides of the purifier.
2.The purifier’s air inlet and air outlet should never be blocked.
Operating Instructions
Switching On the Air Purifier
1. Prepare the air purifier according to the“Getting Started”section of this manual.
2. Plug the power cord into a wall outlet; the air purifier will make a “beep” indicating
the purifier is in standby mode.
3. Press the power button to switch on the air purifier; the indicator light will switch
on and fan speed will be set to auto mode.
4. Each time the air purifier is turned on, the air quality indicator light will flash for 3
minutes as the purifier’s air quality sensor activates and evaluates the surrounding
air quality. After 3 minutes, the indicator light will become solid and its color will
indicate the surrounding air quality. Based on this observed air quality, the purifier’s
fan will automatically turn to an appropriate speed.
Note: Fan speed based on surrounding air quality will not automatically be selected if
the user has already manually selected a fan speed before the air quality evaluation is
complete.
Adjusting Fan Speed
Press the or button above 'Fan Speed’ to select a desired fan speed (auto mode/
low/mid/high).
The indicator light below each fan speed icon will turn on once the desired speed is
selected.

6 7
Auto Mode
Once auto mode is selected, the fan will turn to an appropriate speed based on the
initial air quality evaluation.
Air Quality Indicator Light Green Orange Red
Fan Speed Low Mid High
Light Sensor
When in auto mode, the air purifier will automatically switch into night mode when
the light sensor detects a dark environment with little to no light. Night mode will
automatically discontinue and go back into auto mode when light is detected.
Note: Night mode can also be activated manually.
Air Quality Indicator Light
The air quality indicator light can display 3 colors to represent surrounding air quality.
Air Quality Indicator Light Green Orange Red
Air Quality Good Moderate Bad
Press and hold the power button for 5 seconds to turn off the air quality indicator
light. Hold again for 5 seconds to turn the air quality indicator light back on.
Note: Night mode disables the ability to manually switch on and off the air quality
indicator light using the power button.
Timer
Press the or button above‘Timer’ to select a desired operation time of 1, 4, 8 or 12
hours.The indicator light will turn on below each time setting once the desired timer
is selected.The air purifier will automatically switch off at completion of the timer.
Night Mode
1. Press the night button to turn on night mode.The indicator light above the button
will turn on to show night mode has been activated. Press the button again to turn
off night mode.
2. Once night mode is activated, the air quality and fan speed indicator lights will turn
off and the air purifier will use a low fan speed to ensure a comfortable sleeping
environment.
Ion Function
When the ion function is turned on, the purifier will create a stream of negative ions
that attach to particles floating in the air such as dust, pet dander, pollen and cigarette
smoke, forming larger particles which will more easily be caught by the purifier’s filters.
Press the ion button to turn on the ion function.The indicator light above the button
will switch on to show the ion function is in operation. Press the button again to turn
off the ion function.
Lock Button
Press and hold the lock button for 3 seconds to lock the air purifier.“Locking”means all
buttons will stop functioning to prevent accidental presses.This can be useful when
children are around as they may attempt to press the air purifier’s buttons. Hold the
lock button for another 3 seconds to unlock.
Reset Button
The indicator light above the reset button will flash when the purifier’s filters need
cleaning and replacing.Please refer to the“Maintenance and Care”section of this
manual for more details.
The reset indicator light will turn on based on the accumulative operating time (up to
2160 hours). Assuming the air purifier is operated for 8 hours a day, the reset indicator
light will turn on after 9 months.
Note: It is recommended to periodically check the filters, especially if there have been
heavy odors or particles observed in the same indoor area as the air purifier.The filter
replacement period may differ depending on the operating time and environmental
conditions.
After replacing the filters, the reset indicator light will remain flashing until the reset
process has been completed.To complete the reset process, power on the air purifier
and press and hold the reset button for 3 to 5 seconds until the purifier beeps three
times.These beeps will signal that the countdown to the next filter reset time has
begun.
Note: Do not press the reset button if the reset indicator light has not switched on.
Doing so may lead to an incorrect calculation of the filters’ operation time and lead to
degraded filter performance in the future.