2connect 2c-scmk30-2d User manual

- 1

USER GUIDE

BARCODE SCANNER 2C-SCMK30-2D

- 2 -

About This User Guide

Pls read all the content of the user guide carefully to use the products safely and effectively.

You are advised of keeping it properly for your using reference.

Disclaimer

Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide

warranty or replacement service.

The pictures in this user guide are for reference only. If there are any pictures which not

match the actual product, please take actual products as the standard. Updated information

is subject to change without notice.

All information contained in this guide are protected by copyright, and our company

reserves all rights. All or part of this guide is prohibited to excerpt, copy, bundle other

products, or sell without the written permission from us.

Service Information

For technical assistant or product service and repair, please contact us.

- 3 -

Version Record

Version number

Version description

Version date

SV1.1_HV1.2_190330_201903

30d024-190330

Initial version

2019-4-15

SV1.1_HV1.2_190330_d025 Modified the gs128 menu, the default is invalid

2019-4-16

SV1.1_HV1.2_190330_d027

1. Modified the 39full conversion tail C error;

2.Modified the 39full conversion is not correct;

3.Modified the setting of switch to USB keyboard

mode, save the parameters before set;

4. Modified the USB to serial port setting successful

voice prompt error;

5. Modified the compatible XP system;

6. Modify the button press until the decoding is

successful or release the button to turn off the

light;7.Increase the USB network mode and

communicate with the host computer through the

USB network mode;

2019-4-17

SV1.3_HV1.2_190330_d027

1. Modify the lighting effect to improve the

decodingeffect;

2. Modified the communication between the

compatible USB network and the host computer

except the Win10 system;

2019-4-19

SV1.4_HV1.2_190330_d027

1. Add the function of modifying the IP address,

which can be set by the host computer or scanning

mode.2. When set to USB network mode, the

2019-4-30

- 4 -

default IP address is 32.45.78.1

SV1.5_HV1.2_190330_d027

1. The default frequency of the sound is changed to

2.7K

2. Thisversion of HS-26.

2019-5-6

SV1.6_ZS_HV1.2_2K7_190330

_d031

1.Greatly improve the decoding performance

2. Set the early exit decoding function

3. Modified the callback function lost problem

4. code128 can solve hidden characters, and

related to the menu;

2019-5-23

SV1.7_ZS_HV1.2_2K7_190330

_d031

1.The output code length default is changed to 4-50

2.The maximum sound is changed to 2.7K

2019-5-23

SV1.7_ZS_HV1.2_2.048K_190

330_d031

The maximum sound is changed to 2.048K

2019-5-23

SV1.8_ZS_HV1.2_2.048K_QZ_

190330_d033

1.Increase the hardware watchdog

2. The maximum sound is changed to 2.048K

3. Solve the problem of noise at start-up

4. Because the RTC fails, the callback function uses

the counting method

5.Accelerate the anti-white code

6. Modify the HID send speed

2019-5-30

SV1.8_ZS_HV1.2_2.048K_MZ_

190330_d033

Increase the hardware watchdog

2. The maximum sound is changed to 2.048K

3. Solve the problem of noise at start-up

4. Because the RTC fails, the callback function uses

the counting method

2019-5-31

- 5 -

5.Accelerate the anti-white code

6. Modify the HID send speed

7. Serial output, no terminator, initialized to

self-sensing mode

SV1.9_ZS_HV1.2_2K7_QZ_19

0330_d033

1.Initialize open anti-white code

2. Can switch to self-sensing mode

2019-6-1

SV1.9_ZS_HV1.2_2.048K_QZ_

190330_d033

1.Initialize open anti-white code

2. Can switch to self-sensing mode

2019-6-1

SV2.0_ZS_HV1.2_2.048K_MZ_

190330_d033

Add the aging test mode

2019-6-5

SV2.0_ZS_HV1.2_2K048_QZ_

190605_d037

1.PDF optimization

2.DM optimization

3. QR high density optimization

4. QR code crash problem

5. PDF corner decoding problem

2019-6-10

Catalogue

、

Product Introduction ..................................................................................................................................... - 13 -

1.1 Main feature .......................................................................................................................................... - 13 -

1.2 Unpack your device .............................................................................................................................. - 13 -

1.3 Product display ..................................................................................................................................... - 14 -

1.3.1 External view .............................................................................................................................. - 14 -

1.3.2 Dimension (mm) ........................................................................................................................ - 14 -

1.4 Communication port ............................................................................................................................. - 15 -

1.5 Start-up, shutdown, standby and restart ........................................................................................... - 15 -

1.6 Maintenance .......................................................................................................................................... - 15 -

1.7 Reading skills ........................................................................................................................................ - 16 -

、

Barcode Setting ............................................................................................................................................. - 17 -

2.1 Mark Setting .......................................................................................................................................... - 17 -

2.2Basic Setting Barcodes ........................................................................................................................ - 17 -

2.2.1 Turn on/Turn off configuration code........................................................................................ - 17 -

2.2.2 Restore Factory Defaults ......................................................................................................... - 18 -

2.2.3 Read product batch version ..................................................................................................... - 18 -

2.2.4 Read user defaults .................................................................................................................... - 18 -

2.2.5 Interface Setting ........................................................................................................................ - 19 -

2.2.6 Serial port setting ...................................................................................................................... - 20 -

2.2.7 Scan Mode ................................................................................................................................. - 22 -

2.2.8 LEDControl ................................................................................................................................. - 23 -

2.2.9 Aiming light control .................................................................................................................... - 23 -

2.2.10 Control character escape....................................................................................................... - 24 -

2.2.11 GS Control character substitution(Enable character escape first)................................... - 24 -

2.2.12 Prefix setting ............................................................................................................................ - 25 -

2.2.13 Suffixsetting ............................................................................................................................. - 26 -

2.2.14 Unicode Output Mode ............................................................................................................ - 27 -

2.2.15 Inverse code option ................................................................................................................ - 27 -

2.2.16 virtual keyboard ....................................................................................................................... - 28 -

2.3 Beeper, LED notifications and Vibration prompt setting barcode .................................................. - 29 -

2.3.1 Beeper Volume setting ............................................................................................................. - 29 -

2.3.2 Start-up beep ............................................................................................................................. - 29 -

2.3.3 Start-up vibration prompt ......................................................................................................... - 30 -

2.3.4 Good read beep ........................................................................................................................ - 30 -

2.3.5 Beep pitch-good read ............................................................................................................... - 30 -

2.3.6 Good read Prompt audio rate (tone) ...................................................................................... - 30 -

2.3.7 beep duration-good read .......................................................................................................... - 31 -

2.3.8 Error sound ................................................................................................................................ - 31 -

2.3.9 Good-read LED ......................................................................................................................... - 32 -

2.4 Timeout between decodes (Same barcodes)

（

Self-induction mode

）

....................................... - 32 -

2.5 USB keyboard update speed setting ................................................................................................. - 33 -

2.6 OA & LF setting

（

USB keyboard

）

................................................................................................... - 34 -

2.7 USB keyboard text-transform ............................................................................................................. - 34 -

2.8 Keyboard layout setting ....................................................................................................................... - 35 -

2.9 Symbologies .......................................................................................................................................... - 39 -

2.9.1 enable/disable all symbologies ............................................................................................... - 39 -

2.9.2 Codabar ...................................................................................................................................... - 39 -

2.9.3 Codabar start/ending character setting.................................................................................. - 39 -

2.9.4 Codabar limitation of length ..................................................................................................... - 40 -

2.9.5 Code 39 ...................................................................................................................................... - 40 -

2.9.6 Code 39 check bit .................................................................................................................. - 40 -

2.9.7 Code 39 Full ASCII ................................................................................................................... - 41 -

2.9.8 Code 39 limitation of length .................................................................................................. - 41 -

2.9.9 Code 32 (Code 39 needs to be enabled

）（

Not Enabled

）

.............................................. - 41 -

2.9.10 Interleaved 2 of 5

（

ITF5

）

.................................................................................................. - 42 -

2.9.11 Interleaved 2 of 5

（

ITF5

）

check bit ................................................................................... - 42 -

2.9.12 Interleaved 2 of 5

（

ITF5

）

length setting .......................................................................... - 42 -

2.9.13 Interleaved 2 of 5Limitation of length ................................................................................... - 44 -

2.9.14 Industrial 2 of 5 (Industrial 25code)

（

4-24bit

）

.................................................................. - 44 -

2.9.15 Industrial 2 of 5 Limitation of length ..................................................................................... - 44 -

2.9.17 Matrix 2 of 5 Limitation of length ........................................................................................... - 45 -

2.9.19 Standard 25Limitation of length ............................................................................................ - 46 -

2.9.20 Standard 25 check bit............................................................................................................. - 46 -

2.9.21 Code 93 .................................................................................................................................... - 47 -

2.9.22 Code 93 Limitation of length ................................................................................................. - 47 -

2.9.23 Code 11

（

Not Enabled

）

...................................................................................................... - 47 -

2.9.24 Code 11 check bit output

（

Not Enabled

）

......................................................................... - 48 -

2.9.25 Code 11 check bit option

（

Not Enabled

）

.......................................................................... - 48 -

2.9.26 Code 11 Limitation of length

（

Not Enabled

）

.................................................................... - 49 -

2.9.27 Code 128 .................................................................................................................................. - 49 -

2.9.28 Code 128 Limitation of length ............................................................................................... - 49 -

2.9.29 GS1-128 ................................................................................................................................... - 50 -

2.9.30 ISBT-128 .................................................................................................................................. - 50 -

2.9.31 Plessey ..................................................................................................................................... - 50 -

2.9.32 Plessey Limitation of length ................................................................................................... - 50 -

2.9.33 Plessey check bit optional ..................................................................................................... - 51 -

2.9.34 MSI plessey ............................................................................................................................. - 51 -

2.9.35 MSI plessey Limitation of length ........................................................................................... - 52 -

2.9.36 MSI plessey check bit output ................................................................................................ - 52 -

2.9.37 MSI plessey Check mode selection setting ........................................................................ - 52 -

2.9.38 UPC-A ....................................................................................................................................... - 53 -

2.9.39 UPC-A check bit ...................................................................................................................... - 53 -

2.9.40UPC-A toEAN-13 ...................................................................................................................... - 53 -

2connect 2C-SCMK30-2D User manual

Popular Barcode Reader manuals by other brands