2connect 2C-WHS-26-2D User manual
- 1 - V1.0.5
User Guide
2C-WHS-26-2D
- 2 -
About This User Guide
Disclaimer
Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide
warranty or replacement service.
The pictures in this user guide are for reference only. If there are any pictures which not match
the actual product, please take actual products as the standard. Updated information is subject to
change without notice.
All information contained in this guide are protected by copyright, and our company reserves all
rights. All or part of this guide is prohibited to excerpt, copy, bundle other products, or sell without
the written permission from us.
Our company has the right of final interpretation of this manual.
Service information
If you need more technical support, please call us or send us an email. We are happy to serve
you.
- 3 -
Version record
version number
Version description
Version date
LW-1.10A
Initial version
2017-12-12
LW-1.10E
20：52：52 Jan 24 2018
1. Add small language keyboard
setting barcode;
2. The virtual Bluetooth mode
setting the barcode;
3. HID search setting the barcode.
2018-02-05
SW:LW-1.10M 17:24:17 Apr 11 2018
Boot: 1.02A
Repair cannot be reconnected
automatically
2018-6-30
SW:LW-1.16A 17:40:05 Aug 29 2018
Boot: 1.04A
Fix automatic adaptation
2018-8-30
SW:LW-1.17B 17:13:18 Sep 27 2018
Boot: 1.04A
1, repair upload menu data
2, increase the Belgian French
keyboard
3, increase the ending suffix Tab
4, increase the cast large,
lowercase and no conversion case
2018-9-28
SW:LW-1.17D 12:40:19 Nov 06 2018
Boot: 1.04A
Fix bugs, BLE mode sometimes
fails
2019-1-5
SW:LW-1.18B.17：27:56 Mar 15 2019
Boot: 1.05A
Modify the settings menu (no
need to read the settings and exit
settings)
2019-3-29
SW:LW-1.19B 10:23:47 May 20 2019
Boot: 1.05A
Add control character escape
function
Increase and hide more byte bits
setting code
Add UPC-A to EAN-13
Add upc-e to UPC-A
2019-05-21
- 4 -
Add UPC / EAN / Jan additional
code
Add ean to ISBN
Add ean to ISSN
Can support unlimited length
setting of one-dimensional
barcode
Add support for reverse barcode
Increase codeID
Increase AIM ID
Add control character escape
Add auto sense
SW:LW-1.19C 16:58:20 Aug 15 2019
Boot: 1.04A
Repair the disconnection
phenomenon under the specific
length of ble mode
2019-10-30
V1.0.5
- 5 -
CATALOG
1.Product Introduction....................................................................................................................... - 9 -
1.1 Main feature..........................................................................................................................- 9 -
1.2 Unpack your device.............................................................................................................. - 9 -
1.3 Communication port............................................................................................................. - 9 -
1.4 LED indicator light............................................................................................................... - 9 -
1.5 Start-up, shutdown, standby and restart..............................................................................- 10 -
1.6 Maintenance........................................................................................................................- 10 -
1.7 Reading skills......................................................................................................................- 10 -
2.System Setting.............................................................................................................................. - 11 -
2.1 Mark setting........................................................................................................................ - 11 -
2.2 Basic barcode setting.......................................................................................................... - 11 -
2.2.1 Pair receiver.............................................................................................................. - 11 -
2.2.2 Real-time mode.........................................................................................................- 12 -
2.2.3 Warehousing mode................................................................................................... - 12 -
2.2.4 Initialization setting.................................................................................................. - 13 -
2.2.5 Read version information......................................................................................... - 13 -
2.2.6 Time out setting........................................................................................................ - 14 -
2.3 Volume setting.................................................................................................................... - 15 -
2.3.1 Volume setting.......................................................................................................... - 15 -
2.3.2 Buzzer frequency setting.......................................................................................... - 15 -
2.4 Language setting.................................................................................................................- 16 -
2.5 Transmission speed setting................................................................................................. - 17 -
2.6 Suffix setting.......................................................................................................................- 18 -
- 6 -
2.7 Add user-defined prefix/suffix............................................................................................- 18 -
2.8 Hide user-defined prefix/suffix...........................................................................................- 19 -
2.9 Control character escape.....................................................................................................- 22 -
2.10 GS Character barcode setting........................................................................................... - 22 -
2.11 USB Keyboard case output control.................................................................................. - 23 -
2.12 Product user configuration................................................................................................- 23 -
2.13 Unicode Output Mode...................................................................................................... - 24 -
2.14 Scan mode.........................................................................................................................- 24 -
2.15 Repeated code detection................................................................................................... - 25 -
2.16 Screen reading mode.........................................................................................................- 26 -
2.17 Center mode......................................................................................................................- 26 -
2.19 Code ID output option setting...........................................................................................- 27 -
2.20 AIM ID Barcode setting....................................................................................................- 28 -
2.21 Inverse code option(for 1D barcode / DataMatrix/Aztec)................................................- 28 -
2.22 Symbologies..................................................................................................................... - 29 -
2.22.1 Enable/disable all symbologies...............................................................................- 29 -
2.22.2 Enable/disable all 1D symbologies.........................................................................- 29 -
2.22.3 Enable/disable all 2D symbologies.........................................................................- 30 -
2.22.4 Codabar On/off setting........................................................................................... - 30 -
2.22.5 Codabar Start/ending character setting...................................................................- 30 -
2.22.6 Codabar Length limit setting.................................................................................. - 31 -
2.22.7 Code 39 Turn barcode on/off setting...................................................................... - 31 -
2.22.8 Code 39 Check bit setting.......................................................................................- 32 -
2.22.9 Code 39 Full ASCII On/off setting.........................................................................- 32 -
2.22.10 Code 39 Length limit setting................................................................................ - 33 -
2.22.11 Code 32 (need code39to open) Turn barcode on/off setting.................................- 33 -
2.22.12 Interleaved 2 of 5(ITF25)Turn barcode on/off setting..........................................- 33 -
2.22.13 Interleaved 2 of 5(ITF25)Check bit setting.......................................................... - 34 -
2.22.14 Interleaved 2 of 5(ITF25)Length selection setting............................................... - 34 -
2.22.15 Interleaved 2 of 5 Length limit setting................................................................. - 36 -
- 7 -
2.22.16 Industrial 2 of 59(Industry 25 code)Turn barcode on/off setting......................... - 37 -
2.22.17 Industrial 2 of 5 Length limit setting.................................................................... - 37 -
2.22.18 Matrix 2 of 5(matrix 25 yards) (4-24 digits)Turn barcode on/off setting.............- 38 -
2.22.19 Matrix 2 of 5 Length limit setting.........................................................................- 38 -
2.22.20 Code 93 Turn barcode on/off setting.................................................................... - 38 -
2.22.21 Code 93 Length limit setting................................................................................ - 39 -
2.22.22 Code 11 Turn barcode on/off setting.................................................................... - 39 -
2.22.23 Code 11 Check bit output Turn barcode on/off setting.........................................- 40 -
2.22.24 Code 11 Check selection setting...........................................................................- 40 -
2.22.25 Code 11 Length limit setting................................................................................ - 41 -
2.22.26 Code 128 Turn barcode on/off setting.................................................................. - 41 -
2.22.27 GS1-128 Turn barcode on/off setting................................................................... - 41 -
2.22.28 128 code Length limit setting............................................................................... - 42 -
2.22.29 UPC-A Turn barcode on/off setting......................................................................- 42 -
2.22.30 UPC-A Check bit setting...................................................................................... - 43 -
2.22.31 UPC-A turn EAN-13.............................................................................................- 43 -
2.22.32 UPC-E Turn barcode on/off setting...................................................................... - 43 -
2.22.33 UPC-E Check bit.................................................................................................. - 44 -
2.22.34 UPC-E extend UPC-A.......................................................................................... - 44 -
2.22.35 EAN/JAN-8 Turn barcode on/off setting..............................................................- 44 -
2.22.36 EAN/JAN-13 Turn barcode on/off setting............................................................- 45 -
2.22.37 UPC/EAN/JAN Additional code setting...............................................................- 45 -
2.22.38 EAN13 turn ISBN.................................................................................................- 46 -
2.22.39 EAN13 turn ISSN................................................................................................. - 46 -
2.22.40 GS1 DataBar（RSS14）......................................................................................- 47 -
2.22.41 GS1 DataBar Limited........................................................................................... - 47 -
2.22.42 GS1 DataBar Expanded........................................................................................- 47 -
2.22.43 PDF417.................................................................................................................- 48 -
2.22.44 QR Code............................................................................................................... - 48 -
2.22.45 Micro QR..............................................................................................................- 49 -
- 8 -
2.22.46 Data Matrix...........................................................................................................- 49 -
2.22.47 Aztec Code............................................................................................................- 49 -
Appendix 1 Data and edit barcode...................................................................................................- 50 -
Appendix 2 prefix / suffix control character table...........................................................................- 54 -
Appendix 3 prefix / suffix visible character table........................................................................... - 55 -
Appendix 4 barcode type ID table................................................................................................... - 59 -
Appendix 5 AIM ID table................................................................................................................ - 60 -
Appendix 6 Control character set (USB keyboard mode) (not enabled).........................................- 61 -
Some feature configuration instructions and examples................................................................... - 63 -
- 9 -
1.Product Introduction
This user guide applies to HS-26 wireless with base which apply the complete set of patent
technology developed by Guangzhou YOKO Electron Co., Ltd. The scanners above are of strong
identification capability and support automatic continuous scanning mode with fast and flexible
scanning speed.
In this chapter, we will introduce the instruction of scanner with pictures, please compare to the
scanner you bought when reading this user guide, which is good for your understanding. This chapter
applies to regular users, maintenance personnel, and software developers.
1.1 Main feature
* Support computer, mobile screen scanning
* Easy to operate and easy to master
* Rich decoding types
* Support invoice function
* Wired and wireless dual mode free switching
* Large-capacity storage, safe and reliable
*Exclusive power management system, long standby time
1.2 Unpack your device
Unpack and remove the product and its accessories. Check that all items are complete against
the packing list and determine if there are any damaged parts. If there are any damaged or missing
parts, please keep the original packaging and contact your supplier for after-sales service
1.3 Communication port
The product must be connected with a host before it can be operated and used.The host can be a
PC, a POS machine or a smart terminal with a USB interface.
USB
USB interface on the host
1.4 LED indicator light
- 10 -
Indicator status
explain
red light on
Charging
red light off
No charging
green light on
No decoding
green light off
Decode successfully
one blue light on
Pairing successful or connect to USB
two blue light twinkle alternately
Bluetooth HID pair mode
1.5 Start-up, shutdown, standby and restart
Start-up：Connect host computer with scanner, which will automatically start-up and in working
state.
Shutdown：Remove the data cable which is connected with scanner; remove the USB which is
connected with host computer;
Restart：If the product crash or no response when pressing button, please restart it.
1.6 Maintenance
* The window must be kept clean, the supplier do not bear the guarantee responsibility due to the
improper maintenance.
* Avoid the window being wear and tear or scratched by hard object
* Use the hairbrush to remove the stain on the window
* Clean the window with a soft cloth, such as lens cleaning cloth
* Spraying liquid onto the window is prohibited.
* Prohibit any cleaning solvents, except for the cleaning water.
1.7 Reading skills
If the barcode is small, it should be closer to the scanning window; if the barcode is large, it
should be far away from the scanning window a little more, thus easier to be read correctly.
If the barcode is highly reflective (for example, the coated surface), you may need to tilt the
barcode at an angle to successfully scan it.
Barcode scanning example：
- 11 -
2.System Setting
This product is mainly used to set options and functions by reading a series of special
barcodes,in this chapter,we'll detail the options and features available to users and provide the
corresponding setup code.This method of setting up scanning is relatively straightforward and easy
to understand, and is convenient for the user to operate.
2.1 Mark setting
1
2
Setting Mode
This is the mark for setting up the barcode function of the mode.The mark consists of
two parts:
1.Barcode section of setting code
2.Set the name of the option or function, such as the set function.
2.2 Basic barcode setting
2.2.1 Pair receiver
A:
Press the button briefly to start the scanner, and the green indicator light will be on if
the scanner is started successfully
B:
Scan the barcode below "enter pairing mode". After successfully entering pairing mode, the
Bluetooth indicator will flash
Enter Pairing Mode
- 12 -
C:Connect the receiver to the computer or other devices, and the buzzer "beeps" once the
pairing is successful, and the blue indicator light will be always on
2.2.2 Real-time mode
In real-time mode, the scanned data is transmitted directly to the computer via wired or wireless,Aaer
the transmission is successful, the scanner will emit a low-frequency short tone and the green
indicator will flash once.
If the transmission fails, three low-frequency short tones are issued to warn, and the green light
flashes three times.
Enter Real-Time Mode (Default)
2.2.3 Warehousing mode
If the scanner works beyond the wireless transmission range, the storage mode is recommended.In
warehousing mode, the scanned data is stored in the scanner's internal storage.
In the storage mode, after scanning a bar code, the scanner will emit a short tone (the frequency is
low first and then high).At the same time, the green light flashes once and the scanned bar code is
automatically stored in the scanner.
Enter Warehousing Mode
View the number of barcodes stored in the warehouse by scanning the “Display total
warehouse entries” barcode.
- 13 -
Display Total Warehouse Entries
Upload warehousing data by scanning the “Data Upload” barcode,barcodes stored in the
scanner after data upload are not automatically deleted.The user uploads the warehousing data
multiple times by scanning the "data upload".
Data Upload
Note: Please try to ensure that the wireless signal connection is good when uploading data,or
upload with the data cable connected.
Clear barcode data in the warehouse by scanning the “Clear Warehousing Data” barcode.After
the barcode is cleared, it will not be uploaded again. Please confirm whether the data has been
uploaded before clearing.
Clear Warehousing Data
2.2.4 Initialization setting
If you accidentally scan other function setting codes during use, resulting in the scanning
function not working properly, you can restore the initialization status by scanning the initialization
bar code.
Restore Factory Settings
2.2.5 Read version information
- 14 -
Read Version Information
2.2.6 Time out setting
Select time out setting barcode
Time Out After 30S (Default)
Time Out After 1min
Time Out After 5min
Time Out After 10min
Time Out After 30min
- 15 -
No Time Out
Time Out Immediately
Display Battery
2.3 Volume setting
2.3.1 Volume setting
Low Volume
High Volume（Default）
Middle Volume
2.3.2 Buzzer frequency setting
2K
Mute
- 16 -
2.7K（Default）
2.4 Language setting
Select the language keyboard you need
English (Default)
German
French
Spanish
Italian
Japanese
- 17 -
International General Keyboard
French(Belgian)
2.5 Transmission speed setting
Select the required transmission speed (speed selection is related to reading barcode);
Fast Transmission
Medium Speed Transmission (Recommended For Use In IOS System Bluetooth Mode)
Low Speed Transmission (Recommended For Bluetooth Mode In Android)
Ultra Low Speed Transmission (Recommended Test Mode Used)
- 18 -
2.6 Suffix setting
Select the end you want to add;
<Data> <CR>
<Data> <LF>
<Data> <CR> <LF>(Default)
<Data> <\t>
Not S uffix
2.7 Add user-defined prefix/suffix
Method of adding prefix and suffix:First scan to add prefix or suffix, then scan the corresponding
barcode (see appendix), up to 32 bytes.
- 19 -
Add Suffix
2.8 Hide user-defined prefix/suffix
Method of hiding prefixes and suffixes:First scan the hidden prefix or suffix, then scan the
hidden bits, hiding up to 16 bytes.
Hidden Barcode Prefix
Hidden Barcode Suffix
Hide 1 bit
Add Prefix
- 20 -
Hide 2 bits
Hide 3 bits
Hide 4 bits
Hide 5 bits
Hide 6 bits
Hide 7 bits
Table of contents
Other 2connect Barcode Reader manuals
