2E GAMING G2721BV User manual
LCD
MONITOR
СВІТЛОДІОДНИЙ
МОНІТОР
СВЕТОДИОДНЫЙ
МОНИТОР
G2721BV
User Manual
Read this manual carefully before use.
.
.
www.2egaming.com
– 2 –
EN
Content
WARNINGS/SAFETY PRECAUTIONS
WARNINGS
ATTENTION
Important safety instructions
OPERATING INSTRUCTIONS
Components and auxiliary equipment
INSTALLATION
Installation of base
FUNCTIONS
Power indicator
Description of connection sockets
Input voltage
Description of buttons
OSD MENU
Menu description
Specifications
Troubleshooting
Additional information
Warranty
3
3
3
4
5
5
5
5
7
7
7
7
8
9
9
11
12
12
35
– 3 –
EN
Warnings/Safety precautions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNINGS/SAFETY PRECAUTIONS
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER AND BACK PANEL THERE
ARE NO USER-SERVICEABLE PARTS
INSIDE.
I CASE OF DAMAGE OR ERROR REFER SERVICING
TO QUALIFIED PERSONNEL.
Lightning flash with arrowhead symbol
within an equilateral triangle is intended
to alert the user to the presence of
non-insulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock in case of improper
usage of the product.
Exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance instructions in the literature
accompanying the product.
WARNING:
Do not put the monitor in rainy or foggy places to prevent from fire or electric shock.
To prevent scratches or damages to the LCD screen, do not knock, apply or rub the surface with sharp
or hard objects or stiff cloths as well as try not to touch the LCD screen with your hands.
Any modifications to this product that have not been clearly and explicitly approved in advance by the
manufacturer responsible for compliance with these regulations are forbidden.
ATTENTION:
Excessive sound pressure from earphones and headphones can cause hearing loss.
– 4 –
EN
Important safety instructions
1. Please read all the instructions carefully before using this product.
2. The instructions should be retained after reading for future reference.
3. Please immediately pull out the AC power plug from an adapter if there is an abnormal sound or
smell or the monitor has no picture, and contact after sales support.
4. The monitor should be kept free from rain, damp and dust to prevent electrical shock and short
circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers etc.
5. The monitor should be kept away from heating objects or direct sunlight. This product requires
good ventilation. Allow 10 cm between the monitor and other appliances or built-in cabinet walls.
6. You may clean the display panel with a soft clean cloth after pulling out the power plug. Do not
repeatedly wipe the panel, nor scrape, tap or strike the panel with hard objects, etc.
7. Do not wipe the monitor with any petrol chemical or alcohol-based solvents, as it will lead to
product damage to the panel and cabinet.
8. Do not place the monitor on an unstable surface.
9. Do not place the power cord or other cables across a walkway in case it is trampled on, especially at
the points of connection to the plug, sockets and the power cord to the appliance.
10. Unplug the appliance during a lightning storm or when it is not used for a long period of time.
11. Unplug this product when the device, power cord or plug are damaged or if the device has been
exposed to liquid or moisture, has been mechanically damaged and does not work properly and
contact an authorized service centre immediately.
12. Keep this appliance away from liquids, splashes of water and do not place objects filled with liquids
on it.
13. Do not disassemble the back cover as it contains high voltages inside and will cause electric shock.
There is no spare parts inside. Internal adjustments and checks should only be conducted by
qualified professionals.
14. Do not place naked flame sources, such as lit candles on or near the monitor. Please pull out the
power plug and contact after sales support if there are abnormal objects or water in the monitor.
– 5 –
EN
Operating Instructions
Components and auxiliary equipment
Before assembling and installing, check for following items to be included in this display package.
４ ５
Monitor
Power cord
Stand base
DP cable (Display Port)
Microfiche and power
requirements label
Stand stem
４ ５
PSU
４ ５
Screws x 4
User manual
Installation
Installation of base
1. Open the package and take out the monitor with foam still attached. Gently place it top-down on a
desktop or table.
– 6 –
EN
2. Take out the stem and base. Use the included screwdriver and one screw to fasten base to the stem.
3. Remove the foam covering the bottom of the monitor, then remove the adapter from the back of
monitor. Use two screws to fasten adapter onto the stem.
4. With the stand fully assembled, reattach it onto the back of monitor. Then remove the remaining foam
on monitor and stand it up on a flat, level desktop or table. Press the button to remove the monitor from
the bracket if mounting.
Note: Make sure the monitor is laid on a flat surface before removing the stand.
– 7 –
EN
Input voltage
DC 12V 4.0A power input. External power supply: A 100-240V~ 50/60Hz 1.5A
Please consult the back label
Indicator: A steady blue light indicates that the power is on and the monitor is operating normally. Blue
light flashing to indicate There is no video source and no horizontal or vertical signal or low voltage
is detected. Make sure your computer It is turned on and all video cables are fully plugged in and/or
connected.
Description of connection sockets
Statement: this document is a reference manual. Please refer tol the actual product.
HDMI HDMI input
DP (Display Port) Display Port input
Earphones Headphone output
DC input 12V DC 12V 4.0 A power input
Functions
Power indicator
– 8 –
EN
Button Function
Conrm / Call up the main menu
Hotkey 1 / Move the cursor down
Hotkey 2 / Move the cursor up
Hotkey 3 / Return button
DC Power button
Description of buttons
– 9 –
EN
OSD menu
Menu description
• The color and shape of the OSD menu of the actual computer may be slightly dierent
from them shown in the gure.
• Specications of the OSD menu may change with improvements of functions without
prior notice.
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on
the screen after the monitor is powered on and the (Home) button is pressed.
1. Press one of the buttons ( ) to activate the browser screen.
2. Press ( ) to enter the OSD screen.
3. Press or to scroll through the functions.
• Select the desired function, and press to enter the sub-menu.
• Press or to scroll through sub-menus, and press key to select and conrm the
desired function.
• Press or to select one option, and press to conrm settings and exit from the
current menu.
4. Press to exit from the menu screen.
– 10 –
EN
Level1 Level2 Level3
Input Source
DP —
HDMI1(2.0) —
HDMI2(1.4) —
HDMI3(1.4) —
Brightness/
Contrast
Brightness (Adjustment Bar; Range: 0 - 100) Default 90
Black level (Adjustment Bar; Range: 0 - 100) Default 50
Contrast (Adjustment Bar; Range: 0 - 100) Default 50
DCR On / O
Color Setting
Gamma 1.8 / 2.0 / 2.2 / 2.4 / 2.6
Pictrue Mode Standard / Photo / Movie / Game / FPS / RTS
Color Temperature Warm / Cool / USER
Low Blue Light (Adjustment Bar; Range: 0 - 100) Default 0
Hue/Saturation Hue (Adjustment Bar; Range: 0 - 100) Default 50
Saturation Saturation (Adjustment Bar; Range: 0 - 100) Default 50
Picture Quality
Setting
Sharpness (Adjustment Bar; Range: 0 - 100) Default 50
Response Time O / High / Middle / Low
Noise Reduction O / High / Middle / Low
Super Resoultion O / High / Middle / Low
Dynamic Luminous Control On / O
Display
Aspect Ratio Wide Screen / 4:3 / 1:1 / Auto
MPRT On / O
LED mode Normal / O / Flicker
Audio
Mute On / O
Volume (Adjustment Bar; Range: 0 - 100) Default 50
Audio Source Auto / HDMI1(2.0) / HDMI2(1.4) / HDMI3(1.4) / DP
Multi-Window
Multi-Window O / PIP Mode / PBP 2Win
Sub Win2 Input DP / HDMI1(2.0) / HDMI2(1.4) / HDMI3(1.4)
PIP Size Small / Medium / Large
PIP Position TopRight / TopLeft / BottomRight / BottomLeft
Swap —
OSD
Language English / / …..
OSD H-Position (Adjustment Bar; Range: 0 - 100) Default 50
OSD V-Position (Adjustment Bar; Range: 0 - 100) Default 50
OSD Transparency (Adjustment Bar; Range: 0 - 100) Default 20
OSD Time Out (Adjustment Bar; Range: 0 - 100) Default 20
OSD Rotation Normal / 90 / 180 / 270
Other
Adaptive Sync On / O
HDR On / O
Reset —
– 11 –
EN
Specifications
Model G2721BV
Screen size 27’’
Matrix type VA
Aspect ratio 16:9
Viewing angles 178 °/ 178 °
Displayable colours 16.7M (8-bit)
Resolution 2560x1440
FPS 144 Hz
Response time 1 ms MPRT
Brightness 350 cd/m2
Contrast 2500:1
Interfaces xHDMI ., xHDMI ., DP ., Audio out
Built-in speakers No
Screen tilt -5°~+15°
Height adjustment No
Screen rotation No
Monitor Power Options 12 V, 4 A
External power adapter parameters 100-240 V, 50/60 Hz, 1.5 A
Power consumption in operating mode
(max) <42W
Standby power consumption ≤0.5W
Wall mounting No
Package dimensions 699x169x440 mm
Weight (NET/GROSS): 4.85 kg/6.72 kg
Sync technology Adaptive Sync
Additional Information Low Blue Light
Flicker Free
– 12 –
EN
Troubleshooting
Problem Solution
Power cannot be turned on Check that both ends of the power cable are plugged into the socket
appropriately and the wall socket is operational
No Input signal message
Check that the signal line is connected properly.
Check that the power of the relevant peripherals is turned on.
Check that the Input option tnat has been selected matches with the
input signal.
Image colour or quality
deteriarates
Check that all the video settings are adjusted appropriately, such
as brightnešs, contrast, colour etc.
Display warning message Check that the input signal line is properly xed.
Select the correct input signal source
Additional information
The production date is encrypted in the serial number in the format
ERC2E *** YYYYMMDD *******, where: YYYYMMDD - year, month and day of production.
– 13 –
UA
Зміст
ПОПЕРЕДЖЕННЯ/ЗАПОБІЖНІ ЗАХОДИ
Основні правила з техніки безпеки
ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ
ВСТАНОВЛЕННЯ
ФУНКЦІОНАЛ
’
’
МЕНЮ
Технічні характеристики
Усунення основних несправностей
Додаткова інформація
Гарантія
14
14
14
15
16
16
16
18
18
18
18
18
19
20
20
22
23
23
36
– 14 –
UA
Попередження/Запобіжні заходи
Р
ИЗИК УРАЖЕННЯ ЕЛЕКТРИЧНИМ СТРУМОМ!
НЕ ВІДКРИВАТИ
ПОПЕРЕДЖЕННЯ/ЗАПОБІЖНІ ЗАХОДИ
-
.
.
.
-
-
, -
.
-
,
.
ПОПЕРЕДЖЕННЯ:
, -
.
, -
, -
.
,
-, , .
УВАГА
, .
– 15 –
UA
Основні правила з техніки безпеки
1. .
2.
.
3. /, -
,
, ’
.
4. , , ,
.
. , -
, .
5. ,
. .
, , 10 .
6. ’ ,
. ,
, , .
7. , ,
, .
8. .
9. , ,
, ’ , ’-
.
10.
.
11. , , ,
,
, .
12. , ’,
.
13. ,
. -
, .
.
14. / ’, . , ’-
’ ,
.
– 16 –
UA
Інструкція з експлуатації
Комплектація та допоміжне обладнання
.
４ ５
DP (Display Port)
４ ５
４ ５
4 .
.
Встановлення
Встановлення основи
1. . .
– 17 –
UA
2. . ,
.
3. , ,
. , .
4. , .
. ,
.
Примітка. , , .
1 .
2 .
– 18 –
UA
Параметри живлення
: 12 4.0A. - : 100-240 ~ 50/60 1.5A
, .
Опис роз’ємів підключення
: .
.
HDMI HDMI
DP (Display Port) Display Port
Навушники
DC input 12V ’ DC 12V 4.0 A
Індикатор: , -
. - . ,
’ , ’ .
Функціонал
Індикатор живлення
– 19 –
UA
/
1 /
2 /
3 /
Роз’яснення до кнопок управління на корпусі монітора
– 20 –
UA
Меню
Екранне меню
• ,
.
•
.
.
().
1. ( ) -
( : «Роз’яснення до кнопок управління на корпусі монітора»).
2. ( ) .
3. , .
• - , .
• - , , ,
.
• - , , , -
.
4. , .
/
Table of contents
Languages:
Other 2E GAMING Monitor manuals
