2M Technology 2MITD-2 User manual

INTELLIGENT STANDING POLE-MOUNTED
MEASURING INSTRUMENT
2MITD-2
Quick Guide
Version: 2.0
REV06122020

Contents
1. Packing List............................................................................................... 1
2. Product Overview..................................................................................... 1
2.1 Appearance and Dimensions .................................................................. 1
2.2 Structure and Cable ................................................................................3
3. Device Installation.................................................................................... 3
3.1 Tools Preparation ................................................................................... 3
3.2 Installation.............................................................................................. 4
3.2.1 Ground Installation........................................................................ 4
3.2.2 Base Plate Installation ...................................................................8
4. Device Operation...................................................................................... 8
4.1 Device Startup ........................................................................................8
4.2 Device Working....................................................................................... 8
4.2.1 Not Measuring Temperature .........................................................8
4.2.2 Measuring Temperature................................................................ 9
4.3 Device Activation..................................................................................10
4.3.1 Basic Info .....................................................................................10
4.3.2 Network Setting...........................................................................11
4.3.3 Activation Password .................................................................... 13
4.3.4 Authentication Scene ..................................................................14
Disclaimer and Safety Warnings...................................................................... 16

1
www.2MTechnology.net
1. Packing List
No. Name Qty Unit
1 Intelligent measuring instrument 1 PCS
2 Pole base 1 PCS
3 Extension pole 2 PCS
4 Expansion bolt 3 PCS
5
Power adapter
1
PCS
6 Power cable 1 PCS
Note: The accessories may vary with device model and version.
2. Product Overview
2MITD-2 is a non-contact thermometer that measures body temperature on the
wrist. It provides abnormal temperature alarm and counting features and is
mounted on a pole with adjustable heights. 2MITD-2 can be widely applied in
schools, office buildings, communities, subway stations, airports, etc.
2.1 Appearance and Dimensions
See the actual device for appearance. The figure below shows device dimensions.
(Unit: mm)

2
www.2MTechnology.net

3
www.2MTechnology.net
2.2 Structure and Cable
The figure below shows the structure and cable of the device. The actual device may
vary.
1. Display screen
2. Temperature measurement module
3. Distance measurement module 4. Extension pole
5. Adapter 6. Pole base
7. Round base plate 8. DC 12V power cable
3. Device Installation
3.1 Tools Preparation
Antistatic wrist strap or antistatic gloves
Marker
Electric drill
14mm wrench

4
www.2MTechnology.net
3.2 Installation
You may choose ground installation or base plate installation. The steps are as
follows.
NOTE!
For long-term use at a fixed location, ground installation should be adopted.
3.2.1 Ground Installation
1. Mark the positions of holes on the ground by referring to the followingfigure.
Fixing hole
Cabling hole
2. Use the electric drill to drill holes according to the marked positions.
3. Turn the extension pole clockwise to connect it to the pole base.

5
www.2MTechnology.net
NOTE!
You may choose to install 1, 2 or no extension pole based on your needs. After
installation, the distance between the temperature measurement module and the
ground will be 1m if one extension pole is used, 4.10ft if two extension poles are
used, and 2.46ft if no extension pole is used.
4. Lead the cable through the standing pole and out through the cabling hole on
the pole base.

6
www.2MTechnology.net
WARNING!
Do not hold/hang the machine by the cable. Otherwise, the cables may
be loosened.
5. Turn the measuring instrument clockwise to connect it to the standing pole.
WARNING!
When turning the measuring instrument, make sure the cable at the base of the pole
is not being compressed, and the cable inside the standing pole rotates with the
instrument correspondingly. Otherwise, the cabling inside the measuring instrument
may be loosened, and device functions may be affected.

7
www.2MTechnology.net
6. Insert M8X80 expansion bolts into the three fixing holes on the ground, and
make sure that the expansion bolts are a bit higher than the ground.
M8x80 expansion
bolts
7. Erect the standing pole, align the hole position at pole bottom with the
expansion bolts fixed on the ground, adjust the standing pole so that it’s
perpendicular to the ground, adjust device direction, and then fasten the
standing pole with nuts.
8. Lead the tail cable out through the hole on the round base plate.
9. Refer to the figure below to fasten the base plate with screws.
Ground

8
www.2MTechnology.net
3.2.2 Base Plate Installation
1. Connect the measuring instrument, extension pole, and pole base by referring
to the Step 3 to Step 5 in Ground Installation.
2. Fasten the base plate with screws by referring to Step 9 in Ground Installation.
4. Device Operation
4.1 Device Startup
After installation is completed, connect the supplied power cable to power via a
power adapter to start up the device. The device starts up successfully when the
display screen lights up.
4.2 Device Working
4.2.1 Not Measuring Temperature
When the device is not measuring temperature, environment temperature, the
number of alarms and normal temperatures measured are displayed on the screen.