2N Telekomunikace LTE Verso User manual



Installation manual 2N® LTE
Verso

v.1.6
www.2n.com





Installation manual 2N® LTE Verso
2 / 213
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Content:
1. Product Overview
1.1 Components and Associated Products
1.2 Terms and Symbols
2. Description and Installation
2.1 Before You Start
2.2 Mechanical Installation
2.2.1 One Module Box
2.2.2 Two Modules Boxes
2.2.3 More Two Modules Boxes
2.2.4 Three Modules Box
2.2.5 More Than Three Modules Boxes
2.2.6 Tamper and I/O Module
2.2.7 Module dimensions
2.2.8 Example of Mounting Plate Installation
2.3 Electric Installation
2.3.1 Overvoltage Protection
2.4 Extending Module Connection
2.5 Completion
3. Function and Use
3.1 Configuration
3.2 Intercom Control as Viewed by External User
3.3 Touch Display Intercom Control As Viewed by External User
3.4 Intercom Control as Viewed by Internal User
3.5 Maintenance
3.6 Downloads
4. Technical Parameters
4.1 General drawings
5. Supplementary Information
5.1 Troubleshooting
5.2 Directives, Laws and Regulations
5.3 General Instructions and Cautions

Installation manual 2N® LTE Verso
3 / 213
•
•
1. Product Overview
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols
Basic Features
2N®LTE Versois an elegant and reliable LTE intercom equipped with lots of useful functions,
which are not quite common in this category of devices. A mobile LTE connection makes it
possible to install devices where no LAN cable connection is available. TheMy2N portal helps
make calls to mobile phones and appropriate 2N devices without complex configuration.
Thanks to SIP support and compatibility with major brands of PBX manufacturers, it can benefit
from using VoIP networks.2N®LTE Versocan be used as a door or special purpose intercom for
office buildings, residential areas and other applications.
2N®LTE Versois a modular system: the user determines its configuration according to the
needs of the particular installation. Unlike other intercoms,
2N®LTE Versois not delivered as a compact unit. After choosing the installation mode and
particular modules, the user gets separate parts to be assembled using the plug&play
connections. This approach allows for unique individual combinations and also leaves space for
adding of additional modules later on.
Wide angle HD camera– allows the tenant to see the calling person on his or her videophone or
PC screen in high resolution. The camera itself is hidden behind a darkened glass, so it is not
visible. The intercom is equipped with night vision, which automatically selects the night/day
mode according to light.
Quick dial buttons– there are 146 quick dial buttons in total in multiple button modules. For
each button, up to three separate phone numbers plus substitute users can be defined, which
ensures that the called user is reached whenever needed. The buttons are backlit with a clear
mechanical response. The nametag surface is scratch resistant.
Keypad– is a keypad module that allows the user to use the intercom as a code lock and dial a
phone number or phonebook position of the called user.
RFID card reader– thecard reader module brings the access control functionality according to
the RFID card or keyfob. With the advanced features, other functions can be RFID card controlled
too.
Electric lock control– as part of the access system, the electrical lock can be controlled by a
code entered on the keypad or the called phone, with the RFID card, via a PC application, etc.
When necessary, more electrical outputs can be added. Numerous parameters allow for a wide
spectrum of applications.
Robustness–2N®LTE Versois designed as a vandal resistant intercom, which withstands
mechanical or weather conditions with no need to purchase extra accessories.

Installation manual 2N® LTE Verso
4 / 213
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Audio quality– using the automatic echo cancelling system, full duplex communication is
available at any time.
2N®LTE Verso installation–simply assemble the modules, insert a SIM card and connect a
power supply. The modules are plug&play, so you do not have to configure them manually.The
intercom is fed from a 12V power supply.
2N®LTE Verso configuration– use a PC equipped with any Internet browser.
Advantages of Use
Easy connection via LTE data network without LAN cabling
Elegant design
Weather resistant
Various modes of installation (flush, surface, plasterboard)
Sensitive microphone and loud speaker
Both-way audio communication – acoustic echo cancellation
Integrated colour HD camera with wide-angle lense and hidden night vision
Selectable number of quick dial buttons with nametags and backlight
Optional numeric keypad with backlight
Option to have multiple modules of the same kind – for example, card reader for both
entering and leaving the building
Integrated switches of electric locks with wide setting options
Optional integrated RFID card reader module
12 V DC power supply
Configuration using web interface
VoIP standard SIP 2.0 support
10 000 Phone Book positions
20 user time profiles
Video codecs (H.263, H.263+, H.264, MPEG-4, MJPEG)
Audio codecs (G.711, G.729, G.722, L16/16kHz)
HTTP server for configuration
SNTP client for time synchronisation
SMTP client for email sending, Picture to Email feature
TFTP/HTTP client for automated firmware and configurationupgrade and update

Installation manual 2N® LTE Verso
5 / 213
•
•
•
•
•
•
•
•
1.1 Components and Associated Products
Main Units
Part No.9155401C-
E
Main unit LTE®Verso
European LTE support only
HD camera
There may be just one main unit in every installation. The main
unit installation requires two frame/box positions one of which is
left for additional installation of a module or internal antenna
stuck to a plastic blind.
Part No.9155401C-
U1
Main unit LTE®Verso
US LTE support only
HD camera
There may be just one main unit in every installation. The main
unit installation requires two frame/box positions one of which is
left for additional installation of a module or internal antenna
stuck to a plastic blind.
•
Caution
LTE®Verso supports T-Mobile and AT&T for the US.


Installation manual 2N® LTE Verso
6 / 213
•
•
•
•
•
•
•
•
•
•
Part
No.9155401CB-E
Main unit LTE®Verso
European LTE support only
HD camera
There may be just one main unit in every installation. The main
unit installation requires two frame/box positions one of which is
left for additional installation of a module or internal antenna
stuck to a plastic blind.
Exposure to direct sunlight is not recommended.
Part
No.9155401CB-U1
Main unit LTE®Verso
US LTE support only
HD camera
There may be just one main unit in every installation. The main
unit installation requires two frame/box positions one of which is
left for additional installation of a module or internal antenna
stuck to a plastic blind.
Exposure to direct sunlight is not recommended.
•
Caution
LTE®Verso supports T-Mobile and AT&T for the US.

•
•
Caution
There may be just one main unit (with/without a camera) in every installation. The
main unit installation requires two frame/box positions one of which is left for
additional installation of a module or internal antenna stuck to a plastic blind.
One blind module with a stuck LTE antenna is supplied with the main unit.


Installation manual 2N® LTE Verso
7 / 213
•
•
•
•
•
External Antennas
2N Part No.
9155048
Axis Part No.
01943-001

2N®LTE Verso – external antenna
optional accessories for weak signals with an internal antenna in a
blind
suitable for all LTE networks
Gain: 4.1 dB
Cable length: 2m
•
Warning
Removing the stuck LTE antenna from the blind module and subsequent
placement into another device part, under any card reader module, e.g., results in
interference and deteriorated functionality of the whole device.


Installation manual 2N® LTE Verso
8 / 213
•
•
•
Diagnostic device
2N Part. No.
9155049
Axis Part No.
02284-001
2N®LTE Verso – debug LAN module
used fot 2N®LTE Verso troubleshooting and configuration
Frames
2N Part
No.9155011
Axis Part No.
01278-001
Flush mounting frame, 1 module

Installation manual 2N® LTE Verso
9 / 213
•
•
2N Part
No.9155011B
Axis Part No.
01279-001
Flush mounting frame, 1 module
2N Part
No.9155012
Axis Part No.
01280-001
Flush mounting frame, 2 modules

Installation manual 2N® LTE Verso
10 / 213
•
2N Part
No.9155012B
Axis Part No.
01281-001
Flush mounting frame, 2 modules

Installation manual 2N® LTE Verso
11 / 213
•
2N Part
No.9155013
Axis Part No.
01282-001
Flush mounting frame, 3 modules

Installation manual 2N® LTE Verso
12 / 213
•
•
2N Part
No.9155013B
Axis Part No.
01283-001

Flush mounting frame, 3 modules
2N Part
No.9155021
Axis Part No.
01287-001
Surface mounting frame, 1 module

Installation manual 2N® LTE Verso
13 / 213
•
•
2N Part
No.9155021B
Axis Part No.
01288-001
Surface mounting frame, 1 module
2N Part
No.9155022
Axis Part No.
01289-001
Surface mounting box, 2 modules

Installation manual 2N® LTE Verso
14 / 213
•
2N Part
No.9155022B
Axis Part No.
01290-001
Surface mounting box, 2 modules

Installation manual 2N® LTE Verso
15 / 213
•
2N Part
No.9155023
Axis Part No.
01291-001
Surface mounting box, 3 modules

Installation manual 2N® LTE Verso
16 / 213
•
2N Part
No.9155023B
Axis Part No.
01292-001
Surface mounting box, 3 modules
•
Tip
The 1-module frame is used when another module is added to the existing
installation or when the module is mounted to an extended interconnecting cable
for an outgoing reader, for example.

•
•
•
•
Tip
Be sure to order the covering frame for the flush or plasterboard mounting box
together with the flush mounting box
1-module frame (Part No. 9155011) – 1-module flush mounting box (Part No.
9155014)
2-module frame (Part No. 9155012) –2-module flush mounting box (Part No.
9155015)
3-module frame (Part No. 9155013) –3-module flush mounting box (Part No.
9155016)


Installation manual 2N® LTE Verso
17 / 213
•
•
•
•
•
•
Extending Modules
2N Part No.9155030
Axis Part. No. 01252-001
2N® IP/LTE Verso– Infopanel
The Infopanel module helps you place such
information into the intercom installation as house
number, opening hours and similar data. The
Infopanel backlight is software controlled.
2N Part No.9155031
Axis Part No. 01253-001
2N® IP/LTE Verso– Keypad
The numeric keypad module helps you dial users via
their phonebook positions or phone numbers, control
the lock and use other code-accessible functions. The
keypad digits and symbols are backlit.
2N Part No.9155031B
Axis Part No. 01254-001
2N® IP/LTE Verso– Keypad
The numeric keypad module helps you dial users via
their phonebook positions or phone numbers, control
the lock and use other code-accessible functions. The
keypad digits and symbols are backlit.

Installation manual 2N® LTE Verso
18 / 213
•
•
•
•
•
•
2N Part No.9155047
Axis Part No. 01277-001
2N® IP/LTE Verso– Touch keypad
The numeric touch keypad module helps you dial
users via their phonebook positions or phone
numbers, control the lock and use other code-
accessible functions. The keypad digits and symbols
are backlit.
2N Part No.91550941
2N® IP/LTE Verso– RFID reader, 125 kHz
The card reader module provides you with access
control via contactless cards or keyfobs. The module
supports the 125 kHz EM4xxx cards.
2N Part No.91550941US
Axis Part No. 02140-001
2N® IP/LTE Verso– RFID reader, 125 kHz
The card reader module provides you with access
control via contactless cards or keyfobs. The module
supports the 125 kHz EM4xxx cards.

Installation manual 2N® LTE Verso
19 / 213
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2N Part No.9155081
Axis Part No. 01636-001
2N®IP/LTE Verso – Touch keypad & RFID reader
125kHz, 13.56MHz, NFC
The touch keypad and card reader module provides
you with access control via contactless cards or
keyfobs. The module supports the following 125 kHz
and 13.56 MHz cards or other carriers (only card serial
number is read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key
2N Part No.9155082
Axis Part No. 01637-001

2N®IP/LTE Verso – Bluetooth & RFID reader 125kHz,
13.56MHz, NFC
The bluetooth and card reader module provides you
with access control via contactless cards or keyfobs.
The module supports the following 125 kHz and 13.56
MHz cards or other carriers (only card serial number is
read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key

Installation manual 2N® LTE Verso
20 / 213
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2N Part No.9155083
Axis Part No. 01638-001

2N®IP/LTE Verso – Touch keypad & RFID reader
125kHz, secured 13.56MHz, NFC
The touch keypad card reader module provides you
with access control via contactless cards or keyfobs.
The module supports the following 125 kHz and 13.56
MHz cards or other carriers (only card serial number is
read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key
HID SE (Seos, iClass SE, Mifare SE)
2N Part No.9155084
Axis Part No. 01639-001

2N®IP/LTE Verso – Bluetooth & RFID reader 125kHz,
secured 13.56MHz, NFC
The bluetooth card reader module provides you with
access control via contactless cards or keyfobs. The
module supports the following 125 kHz and 13.56 MHz
cards or other carriers (only card serial number is
read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key
HID SE (Seos, iClass SE, Mifare SE)