3idee ass-vz VESA User manual

www.3idee.eu
ass-vz VESA Adapter
Assembly instructions
The VESA adapter is compatible with the following products from Asus
(asus.com): VZ249HE, VZ279HE, VX279Q, VX279, VX248H, VX228H,
VX24AH, VX238H, VX249H, VZ27AQ, V229 and VZ279H.
The VESA adapter allows you to conveniently mount your ASUS brand monitor to a
monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and
nuts.
If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels (not included).

2
Assembly instructions
Assembly instruction
Step 1
First, remove the base of your Asus monitor. To do so, loosen
the screw underneath the monitor base. (Figure 1)
Please make sure you have a soft surface when
storing the monitor for disassembly / assembly.
Figure 1
Step 2
Now attach the included plastic adapter to your monitor base
from below as shown. (Figure 2)
Figure 2
Step 3
This is how the attached plastic adapter should look now.
(Figure 3)
Figure 3

3Assembly instructions
Step 4
Now please move the 3idee VESA adapter from below onto
the monitor base / plastic adapter as shown. (Figure 4)
The triangle in the plastic adapter must fit into the triangle in
the metal piece
.
Figure 4
Step 5
The VESA adapter should now be in this position before we
proceed to the next step. (Figure 5)
Figure 5
Step 6
Now screw the supplied screw from behind through the VESA
adapter into the monitor base. (Figure 6)
Use a Phillips screwdriver for this.
Figure 6
Step 7
Please check if the screw has been tightened properly.
(Figure 7)
Figure 7

4
Assembly instructions
Step 8
For this step, we recommend the help of a 2nd person.
Now the monitor + VESA adapter can be screwed to your
VESA arm. (Figure 8)
Please use the 4 screws included in the delivery.
Figure 8
Step 9
Please make sure that all 4 screws are tightened firmly.

5Assembly instructions
Safety instructions
General notes
Make sure that all screws are tight and that the monitor audibly clicks into place during installation (if
available).
The material of the adapter is not heat resistant. Avoid direct heat around the adapter such as PC
exhaust or direct sunlight in summer.
PLA is UV resistant but not suitable for high temperatures.
Avoid jerky movements (pulling, tearing) on the PC monitor. This can affect the performance of the
VESA adapter.
Do not subject the PC monitor to excessive loads such as leaning or pushing. This can impair the
performance of the VESA adapter.
Material Notes
The adapter is made of high-quality polylactide (PLA) plastic. PLA is both a colorfast and UV-resistant
material and has low flammability. Polylactide has a low temperature resistance of approx. 45°C-55°C
and is therefore not suitable for use in the vicinity of direct heat and heat sources.
We wish you a lot of fun with your product.
Your 3idee Team
Responsible for this content:
3idee Technologies S.à r.l
5, ZA Um Lenster Bierg
L-6125 Junglinster
Luxembourg
Powered by TCPDF (www.tcpdf.org)