3idee smsng-s32bm User manual

www.3idee.eu
smsng-s32bm VESA Adapter
Assembly instructions
The VESA adapter is compatible with the following Samsung M8 Smart Monitors
series products (samsung.com):
LS32BM801UNXGO
LS32BM80GUNXGO
LS32BM801UMXZN
LS32BM801UCXXK
LS32BM801UEXXS
LS32BM80PUNXGO
LS32BM80PUWXXL
LS32BM801UUXXU
LS32BM801UUXEN
LS32BM801UNXGO
With the VESA adapter you can easily mount your SAMSUNG brand monitor to a
monitor arm with VESA hole pattern (75 x 75mm). Use the included screws and
nuts.
If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels (not included).

2
Assembly instructions
Assembly instruction
Step 1
First, remove the base of your Samsung monitor. To do this, loosen the screw under the monitor base.
(Figure 1)
Please make sure you have a soft surface when storing the monitor for disassembly /
assembly.
Step 2
Place the supplied loose sheet into the monitor receptacle as
shown. (Figure 1)
Figure 1
Step 3
This is how the plate should be in the monitor mount. (Figure
2)
Figure 2
Step 4
Now slide the sheet down as shown in the illustration.
(Figure 3)
Figure 3
Step 5
Now take the VESA adapter and insert it into the monitor
mount of your Samsung monitor as shown. (Figure 4)
Figure 4

3Assembly instructions
Step 6
This is how the correctly placed VESA adapter should look.
(Figure 5)
Figure 5
Step 7
Now slide the VESA adapter upwards as shown. (Figure 6)
Figure 6
Step 8
Now take the single screw that was in the plastic bag with
the sheet metal and screw it in as shown.
(Figure 7)
Figure 7
Step 9
Please check that you have tightened the screw and that the
assembly has been done as shown. (Figure 8)
Figure 8

4
Assembly instructions
Step 10
For this step we recommend the help of a 2nd person.
Now the monitor + VESA adapter can be screwed to your
VESA arm. (Figure 9)
Please use the 4 screws included in the delivery.
Figure 9
Step 11
Please make sure that all 4 screws are tight. (Figure 10)
Figure 10

5Assembly instructions
Safety instructions
General notes
Make sure that all screws are tight and that the monitor audibly clicks into place during installation (if
available).
The material of the adapter is not heat resistant. Avoid direct heat around the adapter such as PC
exhaust or direct sunlight in summer.
PLA is UV resistant but not suitable for high temperatures.
Avoid jerky movements (pulling, tearing) on the PC monitor. This can affect the performance of the
VESA adapter.
Do not subject the PC monitor to excessive loads such as leaning or pushing. This can impair the
performance of the VESA adapter.
Material Notes
The adapter is made of high-quality polylactide (PLA) plastic. PLA is both a colorfast and UV-resistant
material and has low flammability. Polylactide has a low temperature resistance of approx. 45°C-55°C
and is therefore not suitable for use in the vicinity of direct heat and heat sources.
We wish you a lot of fun with your product.
Your 3idee Team
Responsible for this content:
3idee Technologies S.à r.l
5, ZA Um Lenster Bierg
L-6125 Junglinster
Luxembourg
Powered by TCPDF (www.tcpdf.org)