3M C3266PW User manual

3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch C3266PW, C4267PW, C4667PW,
C5567PW PCT Chassis Display User Guide
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT Chassis Display User Guide.....................................................1
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT Дисплеи с шаси Ръководство за потребителя....................31
3M™ Vícedotykový C3266PW, C4267PW, C4667PW, C5567PW PCT video panel Příručka použivatele..........................................61
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW Korisnički priručnik za PCT kućište zaslona....................................91
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT-skærmkabinet Brugervejledning...........................................121
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT-šassii Ekraani kasutusjuhend................................................151
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT-näyttö Näytön käyttöopas.....................................................181
Guide de démarrage rapide de l’écran d’affichage sur châssis PCT C3266PW, C4267PW, C4667PW, C5567PW
Multi-Touch 3M™ ..........................................................................................................................................211
Οδηγός Χρήστη για την πολυσημειακή οθόνη αφής Chassis PCT C3266PW, C4267PW, C4667PW, C5567PW της 3Μ™............241
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT Chassis Display User Guide.................................................273
Guida rapida all’uso del Display PCT Multi-touch 3M™ C3266PW, C4267PW, C4667PW, C5567PW.............................................303
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT šasijas displeja lietotāja rokasgrāmata..................................333
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PWvPCT sisteminio blokovekrano naudojimo instrukcija ....................363
Gwida għall-Utent għal 3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT Chassis Display...............................393
3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT behuizing Gebruikershandleiding beeldscherm....................423
Ekran 3M™ Multi-Touch w obudowie w technologii PCT C3266PW, C4267PW, C4667PW, C5567PW – Podręcznik
użytkownika ..................................................................................................................................................................................453
Guia do Utilizador do Ecrã PCT Multi-toque da 3M™ (C3266PW, C4267PW, C4667PW, C5567PW)..............................................483
Ghid de utilizare a afişajului multi-tactil pe şasiu PCT 3M™ C3266PW, C4267PW, C4667PW, C5567PW......................................513
3M™ Multidotykový C3266PW, C4267PW, C4667PW, C5567PW PCT video panel Príručka pre používateľa.................................543
Priročnik za uporabo 3M™ večdotičnega PCT zaslona v ohišju C3266PW, C4267PW, C4667PW, C5567PW................................573
Guía de usuario de la pantalla multitáctil con bastidor PCT 3M™ C3266PW, C4267PW, C4667PW, C5567PW.............................603
3M™ Flertryck C3266PW, C4267PW, C4667PW, C5567PW PCT-chassi Bruksanvisning för display..............................................633
Bedienungsanleitung 3M™ Multi-Touch C3266PW, C4267PW, C4667PW, C5567PW PCT Chassis Display..................................663
A 3M™ többérintéses C3266PW, C4267PW, C4667PW, C5567PW PCT paneles kijelző felhasználói útmutatója...........................693

3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch
C3266PW, C4267PW,
C4667PW, C5567PW
PCT Chassis
Display User Guide
Please read, understand and follow all safety information contained in the
Quick Start Guide found at www.3M.co.uk/TouchUserGuides prior to the
use of this device. Retain the Quick Start Guide for future reference.

2 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Contents
Important Notes..........................................................................................................4
Service and Repair Indicators.....................................................................................5
Touch Sensor Care and Cleaning...............................................................................5
3M Touch Systems Support Services.........................................................................6
Contact 3M Touch Systems .......................................................................................6
Chapter 1
Setting Up Your Multi-Touch Chassis Display
System Requirements.................................................................................................7
Unpacking Your Touch Display.................................................................................7
Connecting the Touch Display...................................................................................9
Multimedia Features.................................................................................................10
Testing the Multi-Touch Chassis Display................................................................10
VESA Mounting Option...........................................................................................10
Bracket Mounting Option.........................................................................................11
Access to the Video Controls...................................................................................11
Clearance and Ventilation........................................................................................12
Video Card Requirements........................................................................................12
Using the Standard Controls for the Video Card......................................................12
Supported Video Display Modes and Refresh Rates ...............................................12
Configuring the Display Settings.............................................................................13
Adjusting the Multi-Touch Chassis Video Display..................................................13
On Screen Display....................................................................................................13
Menu Navigation......................................................................................................14
Image Menu..............................................................................................................14
Display Menu...........................................................................................................16
Audio Menu..............................................................................................................18
System Menu............................................................................................................19
Chapter 2
Enabling Your Multi-Touch Chassis Display
Windows® 7 or Higher............................................................................................
24
All Other Platforms (All OS versions prior to Windows® 7)..................................24
Multi-Touch Application Support............................................................................24
Installing 3M™ MicroTouch™ Software................................................................24
Chapter 3
Troubleshooting & Maintenance
Display Installation Problems ..................................................................................25
Troubleshooting the Touch Sensor...........................................................................26
Power Management..................................................................................................27

3 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Chapter 4
Regulatory Information
Regulatory Agency Approvals.................................................................................28
FCC Warning ...........................................................................................................28
CE Conformity for Europe.......................................................................................29

4 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Intended Use
The 3M™ Touch Systems Touch Displays are designed for touch input and tested to
replace an existing display. These displays are intended for professional installation and
use in an indoor environment. They are not designed or tested for use in hazardous
locations. Use in any other application has not been evaluated by 3M and may lead to
an unsafe condition.
Important Notes
•In extreme temperature and humidity situations, you may observe condensation
between the sensor and the display. To minimize this condition, place the unit where
it will be used and allow a 24-hour environmental stabilization period prior to
powering on the display. Any noticeable condensation is temporary and will have no
long term effect on the operation of the display.
•You are cautioned that any change or modification to the equipment not expressly
approved by the party responsible for compliance could void your warranty.
•When unplugging the power supply cord, hold the plug, do not pull by the cord.
•Do not connect or disconnect this product during a thunder storm or lightning.
•Remember to take into account that the operating temperature of the installation may
be greater than the room ambient, and consideration should be given to installing the
unit in an environment compatible with the maximum rated operating temperature.
Specifications can be found in the product data sheet on the 3M Touch Systems
website at http://www.3m.com/touch/.
•The 3M Multi-Touch Chassis Display may not function as expected at altitudes
higher than 2000 meters.
•3M Touch Systems recommends to vacuum or replace the fan filter at least every six
months or if a noticeable rise in surface temperature occurs.
•When installing the unit, ensure that it does not restrict the flow of air to any other
equipment within the installation required for safe operation.
•An inherent characteristic of the PCT sensor is a fine grid pattern that may be visible
under certain lighting conditions.
•Install the display in a well-ventilated area. Always maintain adequate ventilation to
protect the display from overheating and to ensure reliable and continued operation.
•Do not expose this display to direct sunlight or heat. Passive heat may cause damage
to the housing and other parts.
•Do not install this display in areas where extreme vibrations may be generated. For
example, nearby manufacturing equipment may produce strong vibrations. The
vibrations may cause the display to exhibit picture discoloration or poor video
quality.
•The 3M touch controllers mentioned in this document are USB compatible full speed
devices.

5 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
•3M does not warrant that we are USB compliant pursuant to USB specifications.
•Cooling fan will cycle based on internal temperature. When the internal temperature
grows higher than ambient, the fan will turn on.
•System will shut down when internal temperature reached a critical level
Service and Repair Indicators
Do not attempt to service this unit yourself. Unplug the display and refer to an authorized
service personnel in the event that:
•The product is exposed to liquid.
•The product does not operate properly when the operating instructions are followed.
•The product exhibits a distinct change in performance, indicating a need for service.
•The power cable or plug is damaged or frayed
Filter Replacement Procedure
3M Touch Systems recommends to vacuum or replace the fan filter at least every six
months or if a noticeable rise in surface temperature occurs.
•Remove screws from the filter cover
•Remove filter cover and filter
•Replace filter (Use 3M filter # 98-1100-0230-4)
•Re-install cover
Touch Sensor Care and Cleaning
Periodically clean the glass touch sensor surface. Turn off your display before cleaning.
An isopropyl alcohol and water solution ratio of 50:50 is the best cleaning agent for your
touch sensor.
•Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
•Dampen the cloth and then clean the sensor. Spray the cleaner onto the cloth, not
the sensor, so that drips do not seep inside the display or stain the bezel.

6 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
3M Touch Systems Support Services
Visit the 3M Touch Systems website at http://www.3m.com/touch/ to download MT 7
software, drivers and obtain technical documentation.
•Hot Line: 978-659-9200
•Fax: [phone]
•Toll Free: 1-866-407-6666 (Option 3)
•Email: [e-mail]
Contact 3M Touch Systems
Contact information for all offices can be found at: http://www.3m.com/touch/.

7 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Chapter 1
Setting Up Your Multi-Touch Chassis Display
To setup your display you need to complete the following tasks:
•Unpack the components
•Connect the video cable, touch display cables, and power cable
•Power on the display and test your setup
•If your operating system does not support native touch, install MT7 software from
the enclosed CD.
System Requirements
This display requires a personal computer (PC).
•Your PC must have an available USB port or RS-232 serial communication port
(C3266PW only). Connect the touch sensor cable to the communications port.
•Your PC must have a video card and video driver already installed for the display.
Note: Before setting up your Multi-Touch Chassis Display, refer to the “Important
Safety Information” section at the beginning of this document.
Unpacking Your Touch Display
Carefully unpack the carton and inspect the contents. Your Multi-Touch Chassis Display
includes the following:
DVI Cable
VGA Cable
9-pin RS-232 serial cable
(Qty 2 for C3266PW only)
USB Cable

8 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Audio Cable
HDMI Cable
US Power Cable
UK power cable (Optional)
EU power cable (optional)
DisplayPort Cable

9 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Connecting the Touch Display
Note: You are cautioned that any change or modification to the equipment not expressly
approved by the party responsible for compliance could void your warranty.
To connect the Multi-Touch Chassis Display:
1. Turn off the computer before connecting or disconnecting the touch display.
2. Select the appropriate video cable: Display Port, HDMI, DVI, or VGA. Connect one
end of the video cable to the video connector on the display. Connect the other end to
the video card in your computer.
3. Connect one end of the USB touch sensor cable to the LCD and the other end to an
available port on your computer. For the C3266PW display you also have the option
to connect the RS-232 Serial communications instead of USB.
Note: Do not connect both USB and Serial cables on the display. Choose one or the other.
4. Connect the power cable to an appropriate grounded power source.
Power
Switch
Power
Switch
USB
Touch
Remote
OSD
RS-232
Display
Port
HDMI
Port
DVI
Port
VGA
Port
Audio
OUT IN
AC
Input
C4267PW
C4667PW
C5567PW
RS-232
Audio
VGA
Port
AC
Input
USB
Touch
Serial
Touch
OUT IN
Display
Port
HDMI
Port
DVI
Port
C3266PW

10 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Multimedia Features
The Multi-Touch Chassis Display comes with built-in speakers and audio cables that may
be connected to the PC.
Testing the Multi-Touch Chassis Display
Note: The Multi-Touch Chassis Display has a power status light and video controls
located on the side of the display.
Make sure all cables are connected properly. Be sure to tighten all cable screws. Turn on
the power switch located on the back of the display.
To test the display:
5. Turn on your computer.
6. Make sure the video image is displayed. If not, check the LED to ensure that the
display is not in power save mode (amber).
7. Confirm the video image is centered within the viewing area. Use the display
controls to adjust, if necessary.
You can adjust the video controls to better suit your personal preference. For additional
details, refer to the Adjusting the Video Display later in this chapter.
VESA Mounting Option
Model
VESA
mounting
dimensions
(MM)
Max
Screw
Length
(MM)
Weight Hardware
Accessory Kit
C3266PW
200 X 200
10
15 kg (33 lbs)
X
C4267PW
400 X 400
16
23 kg (50.7 lbs)
C4667PW
400 X 400
16
26 kg (57.3 lbs)
C5567PW
400 X 400
16
40 kg (88.2 lbs)

11 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Bracket Mounting Option
The Multi-Touch Chassis Display includes a hardware accessory kit for mounting the
unit into an enclosure. The hardware accessory kit includes mounting brackets and
screws. The mounting holes are located on all 4 sides of the display. Always use the
supplied screws.
Note: Always use the mounting holes when attaching to the brackets. Do not drill
additional holes in the unit to mount brackets to other locations.
To remove the bezel, simply remove the screws along the edge.
Once you remove the bezel, you can attach the brackets to the edges of the chassis. The
brackets are slotted, allowing the chassis to slide in and out. You can also rotate the
brackets to various positions.
Access to the Video Controls
The Multi-Touch Chassis Display has seven buttons located on the side of the display for
the on-screen menu and adjusting the video display. Make sure you will be able to access
the video controls once the Multi-Touch Chassis Display is installed.
If space is tight and access is important, an on screen display remote control (Part No. 98-
1100-0330-2) is an option (C4267PW, C4667PW, C5567PW only).

12 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Clearance and Ventilation
Leave at least two inches of clearance space behind the Multi-Touch Chassis Display for
proper ventilation. Units have vent holes at the top and bottom on the back of the chassis
-- ensure these holes are not blocked during installation. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable and continued
operation.
Note: Be sure to leave at least 2 inches clearance around fan inputs.
Refer to the published specifications for the maximum and minimum operating
temperature and humidity conditions. Refer to the product data sheet on the 3M Touch
Systems website at http://www.3m.com/touch/.
Video Card Requirements
Confirm your computer has a video card that supports the native video resolution of 1920
x 1080 for the Multi-Touch Chassis Display.
Using the Standard Controls for the Video Card
In addition to the standard controls on the display, each video card has several controls
that let you adjust the display settings. The software and driver for each video card is
unique. In most cases, you adjust these settings by using a program or utility provided by
the manufacturer of the video card.
Supported Video Display Modes and Refresh Rates
Your video card should support one of the display modes specified below. If you select
an unsupported mode, the display may stop working or display an unsatisfactory image.
Display Mode
Refresh Rate (Hz)
640 x 480
60
800 x 600
60
1024 x 768
60
1152 x 864
70
1280 x 720
60
1280 x 768
60
1280 x 960
60
1280 x 1024
60
1360 x 768
60
1366 x 768
60
1600 x 1200
60
1680 x 1050
60
1920 x 1080
60

13 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Configuring the Display Settings
After you connect your Multi-Touch Display and turn on your computer, you may need
to configure the display settings. The ideal setting for the Multi-Touch Chassis Display is
as follows:
•Display mode (video resolution) 1920 x 1080
•Refresh rate (vertical sync) 60 Hz
•Color depth (number of colors) at least 16-bit (high color)
Adjusting the Multi-Touch Chassis Video Display
The controls for adjusting the video display are located on the back of the Multi-Touch
Chassis Display. These buttons let you display the on-screen menu to adjust the video
image. Before you make any adjustments:
•Adjust the controls in your normal lighting conditions.
•Display a test image or pattern whenever you adjust the video.
On Screen Display
Your Multi-Touch Chassis Display has seven controls for adjusting the video display.
POWER SOURCE UP DOWN + -MENU
Power -- Turns the display on and off.
Source -- Selects the applicable input source: VGA, HDMI, Display port, or DVI.
Settings are saved automatically.
Up -- Press to move among the menus and from the menu selection to specific choices.
Down -- Press to move among the menus and from the menu selection to specific
choices.
+(plus sign) –Press to increase the volume.
- (minus sign) -- Press to decrease the volume.
Menu -- Shows or hides the onscreen display menu and acts as the Select key when
scrolling through menu options. Refer to Menu Navigation below for additional
information.
If you do not press any buttons, the display adjustment program times out (adjustable up
to 30 seconds) and hides the menu options. Press the Menu button at any time to display
the options again.
Pressing Menu will pull up the On Screen Display (OSD) menus to control the Picture,
Color, Display, OSD Settings, and Setup, as shown below.

14 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Menu Navigation
To adjust the On-Screen Display:
1. Select the Menu button to bring up the on-screen display (OSD)
2. Use the Up and Down buttons to scroll through the various Menu choices:
•Image Menu
•Display Menu
•Audio Menu
•Setup Menu
3. Once the Menu you want is highlighted, hit the Menu button again to select that
Menu.
4. Use the Up and Down buttons to scroll through the various Menu options. For
example, once you have chosen the Picture Menu, use the Up/Down buttons to select
either Brightness, Contrast, or Sharpness.
5. Once the option you want is highlighted, hit the Menu button again to select that
option.
6. Use the Up and Down buttons to increase or decrease the value of the option.
7. Your selection will be automatically saved.
Image Menu
Includes choices for Brightness, Contrast, and Sharpness.
Brightness
Selecting the Brightness option will allow you to adjust the luminescence of the display.

15 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Contrast
Selecting the Contrast option increases or decreases the strength (lightness or dimness) of
the image.
Sharpness
Adjusts the video quality to be sharp or blurry (special for text mode).
Color Settings
Includes choices for 9300k, 6500k, and User Defined Color.
User Defined Settings
Adjust the Red, Green and Blue channels to your preference.

16 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Display Menu
Includes choices for Auto Configure, Horizontal Position, Vertical Position, Clock and
Phase.

17 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Auto Configure
Performs automatic configuration of the Clock, Phase, Vertical and Horizontal positions.
If you do an Auto Configure, the display will try to find the best setting. If you are not
satisfied with the auto adjustment, fine-tune the settings manually as described below.
Phase
Adjust this setting so that either the vertical bars of video noise are replaced by an even
amount of noise across the whole screen, or the noise disappears completely.
Clock
If the clock setting is not fine-tuned, you may observe periodic vertical bars of video
noise on your image. These bars of noise are usually adjusted out when an Auto Adjust is
performed. If the bars of noise are still present, this setting can be adjusted manually.

18 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
H Position (Horizontal Position)
Moves image horizontally on screen either left or right.
V Position (Vertical Position)
Moves images vertically on screen either up or down.
Audio Menu
Volume
Mute