3M Multi-Touch C2167PW User manual

3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
3M™ Multi-Touch C2167PW Display User Guide
3M™ Multi-Touch C2167PW Display User Guide 1
3M™ Multi-Touch C2167PW дисплей Ръководство за потребителя 15
Zaslon 3M™ Multi-Touch C2167PW Korisnički priručnik 29
3M™ Vícedotekový C2167PW displej Příručka uživatele 43
3M™ Multi-Touch C2167PW skærm Brugervejledning 57
3M™ Multi-Touch C2167PW Display Gebruikershandleiding 71
3M™ Multi-Touch ekraani C2167PW kasutusjuhend 87
3M™ Multi-Touch C2167PW-näytön käyttöohje 101
Guide de l’utilisateur de l’écran Multi-Touch C2167PW 3M™115
Bedienungsanleitung 3M™ Multi-Touch C2167PW Display 131
Πολυσημειακή οθόνη αφής C2167PW της 3M™ Οδηγός Χρήστη 147
3M™ többérintéses C2167PW kijelző felhasználói útmutatója 163
Guida rapida all’uso del Display Multi-touch 3M™ C2167PW 177
3M™ Multi-Touch C2167PW displeja lietotāja rokasgrāmata 191
„3M™ Multi-Touch” C2167PW ekrano naudojimo vadovas 205
Gwida għall-Utent għal 3M™ Multi-Touch C2167PW Display 219
Ekran wielodotykowy 3M™ C2167PW Podręcznik użytkownika 233
Guia do Utilizador do Ecrã Multi-toque C2167PW da 3M™ 247
Ghid de utilizare a afişajului multi-tactil C2167PW 3M™ 261
3M™ Multidotykový displej C2167PW Príručka používateľa 275
Priročnik za uporabo večdotičnega zaslona 3M™ C2167PW 289
Pantalla multitáctil 3M™ C2167PW Guía del usuario 303
3M™ Flertrycksdisplay C2167PW Bruksanvisning 317

3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
3M™ Multi-Touch
C2167PW Display
User Guide
Please read, understand and follow all safety information contained in the
Quick Start Guide found at www.3M.co.uk/TouchUserGuides prior to the
use of this device. Retain the Quick Start Guide for future reference.

2 3M™ Multi-Touch Display User Guide
3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
Contents
Important Notes..........................................................................................................3
Maintaining Your Touch Display...............................................................................3
Touch Sensor Care and Cleaning...............................................................................3
3M Touch Systems Support Services.........................................................................4
Contact 3M Touch Systems .......................................................................................4
Chapter 1
Setting Up Your Multi-Touch Chassis Display
Unpacking Your Touch Display.................................................................................5
Multi-Touch Chassis Display Dimensions.................................................................6
Attaching the Side Brackets .......................................................................................6
Connecting the Display..............................................................................................6
Supported Video Display Modes and Refresh Rates .................................................7
Configuring the Display Settings ...............................................................................7
Adjusting the Multi-Touch Chassis Video Display....................................................8
User Controls For On Screen Display........................................................................8
How to Use the OSD Menus......................................................................................8
On-Screen Display Menus..........................................................................................9
Chapter 2
Troubleshooting Your Multi-Touch Chassis Display
Error Messages.........................................................................................................10
Chapter 3
Enabling Your Multi-Touch Chassis Display
Windows™ 7 USB Compatibility............................................................................12
All Other Platforms..................................................................................................12
Multi-Touch Application Support............................................................................12
Installing 3M™ MicroTouch™ Software ................................................................12
Chapter 4
Regulatory Information
Regulatory Agency Approvals.................................................................................13
FCC Warning ...........................................................................................................13
CE Conformity for Europe.......................................................................................13

3 3M™ Multi-Touch Display User Guide
3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
Intended Use
The 3M™ Touch Systems Touch Displays are designed for touch input and tested to
replace an existing display. These displays are intended for professional installation and
use in an indoor environment. They are not designed or tested for use in hazardous
locations. Use in any other application has not been evaluated by 3M and may lead to
an unsafe condition.
Important Notes
In extreme temperature and humidity situations, you may observe condensation
between the touch screen and the display. To minimize this condition, place the unit
where it will be used and allow a 24-hour environmental stabilization period prior to
powering on the display. Any noticeable condensation is temporary and will have no
long term affect on the operation of the display.
When unplugging power supply cord, hold the plug, do not pull by the cord.
Do not connect or disconnect this product during an electrical storm.
Install the display in a well-ventilated area. Always maintain adequate ventilation to protect the
display from overheating and to ensure reliable and continued operation.
Do not expose this display to direct sunlight or heat. Passive heat may cause damage to the
housing and other parts.
An inherent characteristic of the PCT sensor is a fine grid pattern that may be visible under
certain lighting conditions.
Do not install this display in areas where extreme vibrations may be generated. For example,
nearby manufacturing equipment may produce strong vibrations. The vibrations may cause the
display to exhibit picture discoloration or poor video quality.
The 3M touch controllers mentioned in this document, are USB compatible full speed
devices.
3M does not warrant that we are USB compliant pursuant to USB specifications.
Maintaining Your Touch Display
To maintain your display and keep your display operating at peak performance:
Keep your display and touch sensor clean.
Adjust the display video controls.
Do not install the display in a place where ventilation may be hindered.
Touch Sensor Care and Cleaning
3M Touch Systems recommends that you periodically clean the glass touch sensor
surface. Be sure to turn off your display before cleaning.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch sensor.

4 3M™ Multi-Touch Display User Guide
3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel.
3M Touch Systems Support Services
Visit the 3M Touch Systems website at http://www.3m.com/touch/ to download MT 7
software, drivers and obtain technical documentation.
Hot Line: 978-659-9200
Fax: [phone]
Toll Free: 1-866-407-6666 (Option 3)
Email: US-TS[email protected]
Contact 3M Touch Systems
Contact information for all offices can be found at: http://www.3m.com/touch

5 3M™ Multi-Touch Display User Guide
3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
Chapter 1
Setting Up Your Multi-Touch Chassis Display
This chapter describes how to set up your 3M Touch Systems Multi-Touch Chassis
Display. You need to complete the following tasks:
Unpack the components
Connect the video cable, touch display USB cables, and power cable
Power on the display and test your setup
If you are not running Windows® 7 (or Tablet PC), install software from the
enclosed CD.
Unpacking Your Touch Display
Carefully unpack the carton and inspect the contents:
USB communication cable
VGA video cables
DVI video cables
Power cable and DC power supply
Touch documentation and driver CD
Hardware kit -- 4 mounting brackets and (8) M4x8 screws
USB cable
DC power supply
Power cable
Remote key
(sold separately)
VGA cable
DVI cable
Side brackets
8 (M4X8) Screws
Quick Start Guide
Touch Driver CD

6 3M™ Multi-Touch Display User Guide
3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
Multi-Touch Chassis Display Dimensions
C2167PW
Attaching the Side Brackets
Depending on your mounting scheme, you may use the side brackets to mount your
displays onto your wall or device. Find a suitable location for attaching side brackets.
Note: You will need a screwdriver to attach the side brackets. Your touch monitor
includes four side brackets (and eight screws, M4x8). This equipment is intended to be
mounted in accordance with the proper hardware and the installation instructions
supplied with the product. Use of mounting brackets or screws other than those specified
in the installation instructions may cause a hazard.
Top and bottom brackets Left and right side brackets
Connecting the Display
To setup this display, please refer to the following figures and procedures.

7 3M™ Multi-Touch Display User Guide
3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
Be sure all equipment is turned off.
Connect the DC adapter to the power connector (DC IN) on the monitor and the other
end into an electrical outlet.
Connect the D-SUB cable from the display’s VGA input connector to the D-SUB
connector of your host computer and tighten the screws.
Connect the DVI cable from the display’s DVI input to the DVI connector of your
host computer and tighten the screws.
Connect the USB cable from the USB port of your display to the USB port of your
computer.
Configure the touch screen. Refer to the “Touch Screen Driver Installation” section.
Once the touch screen is configured, the monitor is ready for use.
Connect the remote control cable to RJ-type port (optional). Don't connect telephone
or internet cable to RJ-type port. Adapter rating is 12Vdc 3A minimum, marked with
LPS.
Note: To ensure the LCD display works well with your computer, please configure the
display mode of your graphics card to make it less than or equal to 1920 x 1020
resolution and make sure the timing of the display mode is compatible with the LCD
display.
Supported Video Display Modes and Refresh Rates
Your video card should support one of the display modes specified below. If you select
an unsupported video mode, the display may stop working or display unsatisfactory
picture quality.
Display Mode
Refresh Rate (Hz)
640 x 480
60, 66, 72, 75
720 x 400
70
800 x 600
56, 60, 72, 75
832 x 624
75
1024 x 768
60, 70, 75
1152 x 864
75
1280 x 960
60
1280 x 1024
60, 75
1440 x 900
60, 75
1680 x 1050
60
1920 x 1080
60
Configuring the Display Settings
After you connect your Multi-Touch Chassis Display and turn on your computer, you
may need to configure one or more of these display settings. The ideal setting for the
Multi-Touch Chassis Display is as follows:
Display mode less than or equal to 1920 x 1080 resolution

8 3M™ Multi-Touch Display User Guide
3M Touch Systems, Inc. Proprietary Information –TSD-44310 REV C
Refresh rate 60 Hz
Color depth at least 16-bit (high color)
Adjusting the Multi-Touch Chassis Video Display
This section provides guidelines for adjusting the video display and using the display
controls to adjust the image to your liking. The controls for adjusting the video display
are located on the back of the Multi-Touch Chassis Display. These buttons let you
display the on-screen menu and adjust the phase, image position, contrast, and brightness.
Before you make any adjustments:
Be sure to adjust the controls in your normal lighting conditions.
Display a test image or pattern whenever you adjust the video.
User Controls For On Screen Display
Your Multi-Touch Chassis Display has five controls for adjusting the video display.
MENU UP DOWN SELECT POWER
Key/OSD
Menu Off Status
Menu On Status
Menu
Menu appear
Menu disappear/return to main item
Up
Brightness
Main item select up/Adjust up
Down
Contrast
Main item select down/Adjust down
Select
Enter/Select sub-item function
Power
Power On/Off
How to Use the OSD Menus
1. Press the MENU button and press Up or Down button to select among the five
functions in the main menus.
2. Choose the adjustment items by pressing the Select button.
3. Adjust the value of the adjustment items by pressing the Up or Down button.
4. With the OSD menu on screen, press the Menu button to return main menu or exit
OSD.
5. The OSD menu will automatically close if you have left it idle for a pre-set time.
6. To Lock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor has to be turned ON with a valid signal pre-set).
a. Press Menu key, the OSD menu will appear.