3xLogic VX-4V28-MD-IAW User manual

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
1
VISIX V-Series All-in-One Camera – Gen II
VX-4V28-MD-IAW Quick Start Guide
v01-2017

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
2
Table of Contents
1 CAMERA OVERVIEW...................................................................................................................................... 3
VX-4V28-MD-IAW CAMERA DESCRIPTION ...................................................................................................... 3
Available Mounts........................................................................................................................................... 3
INSTALLATION ............................................................................................................................................... 4
Installation – Ceiling Mount .......................................................................................................................... 4
Installation — Pendant Mount ...................................................................................................................... 7
Installation — Wall Mount ............................................................................................................................ 8
Installation — Micro SD Card ...................................................................................................................... 10
2 CAMERA SETUP ........................................................................................................................................... 11
WPS SETUP ............................................................................................................................................... 11
AVAILABLE CAMERA SETUP TOOLS .................................................................................................................. 11
CAMERA SETUP -DHCP -ENABLED NETWORKS................................................................................................. 11
CAMERA SETUP -NON-DHCP NETWORKS ....................................................................................................... 12
REMOTE MONITORING AND VIEWING -ADDING A V-SERIES CAMERA TO VIGIL CLIENT ............................................ 12
REMOTE MONITORING AND VIEWING -ADDING A V-SERIES CAMERA TO 3XLOGIC VIEW LITE II MOBILE (ANDROID AND
IOS) 13

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
3
1Camera Overview
VX-4V28-MD-IAW Camera Description
See below for descriptions of the different camera components.
Figure 1-1 Overview
Number Description
1Front Cover
2Dome Drive
3Micro SD Card Slot
4Network Cable
5Lens
6
IR LED
7
Power Cable
8
Audio/Alarm Cable
I, O: Alarm In / Out
A: Audio Out
GND
9Wi-Fi Antenna
10 Serial Port Interface
11 Hex Screw
12 MIC
13 RESET/WPS Button
NOTE: Press and hold RESET for 10s when the
camera is powering on or rebooting to restore the
default settings, including the user name,
password, IP address, port No., etc.
AVAILABLE MOUNTS
MD Wall Mount (3xLOGIC Product #: VX-WM-MD)
MD Pendant Mount (3xLOGIC Product #: VX-PM-MD)
Universal Corner Mount (3xLOGIC Product #: VX-CM)
Universal Pole Mount (3xLOGIC Product #: VX-POLE)
8
4
2
1
3
7
6

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
4
Installation
INSTALLATION – CEILING MOUNT
Steps:
Drill the screw holes and the cable hole in the ceiling according to the supplied drill template.
Figure 1-2 Drill Template/Adapter Plate
Loosen the set screw on the front cover to disassemble the camera with the supplied Allen key.
Figure 1-3 Disassemble the Camera
Drill Template
A
1 1
Hole A :for cables routed through the wall
Screw hole1 :for Mounting Base
FRONT
Code:194101278

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
5
Hammer the plugs of the expansion screws to the screw holes.
Attach the adapter plate to the ceiling with the supplied expansion screws.
Figure 1-4 Attach the Adapter Plate
NOTE: If the supplied drill template is type II drill template, you can skip step 3 and go straight to step 4.
Attach the dome drive with the supplied PM4x8 screws.
Figure 1-5 Attach the Dome Drive
Connect the power cable, network cable, and the alarm/audio cable.
NOTE: Use pliers to remove the removable part and route the cables via side outlet (as shown in Figure 5-7) if
no cable hole is drilled in step 1, and connect the corresponding cables.
Adapter Plate
Side Outlet

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
6
Figure 1-6 Remove the Removable Part
View the image via the web browser.
Slightly loosen the hex screw beside the WPS/RESET button to adjust the surveillance angle.
Use the supplied adjusting tool to adjust the pan [±30°], tilt [0~80°], and rotation direction [0~360°].
Figure 1-7 3-axis Adjustment
Tighten the hex screw to lock the camera at the desired surveillance angle.
Align the front cover to the dome drive and tighten the set screws on the front cover to complete the
installation.
Figure 1-8 Install the Front Cover
Tear off the protection film softly to complete the installation.
Adjusting Tool
Rotation
Tilt
Pan

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
7
INSTALLATION — PENDANT MOUNT
Steps:
Install the bracket to the ceiling with the supplied screws in the ceiling bracket package.
NOTE: Wall mount product number: VX-PM-MD. Separate mount purchase is required if wall bracket mounting
is adopted.
Attach the adapter plate to the ceiling bracket with the supplied PM4x8 screws.
Figure 1-9 Attach the Adapter Plate
Install the dome drive to the adapter plate.
Figure 1-10 Attach the Dome Drive

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
8
Align the front cover to the dome drive and tighten the set screws on the front cover to complete the
installation.
Figure 1-11 Install the Front Cover
INSTALLATION — WALL MOUNT
Steps:
Install the wall bracket to the wall with the supplied screws in the wall bracket package.
NOTE: Wall mount product number: VX-WM-MD. Separate mount purchase is required if wall bracket
mounting is adopted.
Figure 1-12 Install Wall Bracket

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
9
Attach the adapter plate to the wall bracket.
Figure 1-13 Attach the Adapter Plate
Attach the dome drive to the wall bracket with the supplied screws.
Figure 1-14 Attach the Camera
Align the front cover to the dome drive and tighten the set screws on the front cover to complete the
installation.

V-Series Camera Quick Start Guide | VX-4V28-MD-IAW
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
10
Figure 1-15 Install the Front Cover
INSTALLATION — MICRO SD CARD
This series of camera supports local storage, please refer to the following steps to install the Micro SD card.
Steps:
Remove the front cover by loosening the set screws on it.
Figure 1-16 Remove the Front Cover
Insert the Micro SD card to the card slot until you hear a click.
(Optional) Slightly push the inserted Micro SD card to eject it from the camera.
Figure 1-17 Inserting / Ejecting Micro SD Card
Mirco SD Card