808 canz plus SP888 User manual

Bluetooth wireless is a quick and easy way to connect a
smartphone to a speaker or a headset. There are basically
two steps to making Bluetooth work.
PAIRING: The two devices get
to know each other.
CONNECTING: The two devices
do something together (like play
music).
“Hi. I’m a
phone.”
This guide takes you through the steps to get started.
Getting to know Bluetooth
“Hi phone.
I’m a speaker.”
PAIR M
PAIR M
Make sure the following items came in this package.
• Your speaker • USB charging cable
Step 1: Unpack
Before you start using the Canz Plus speaker for the first
time, it’s a good idea to charge it completely.
Speaker back
Step 2: Charge your speaker
The CHARGE indicator on the back of the
speaker is red while the speaker is charging. It
turns o when the speaker is fully charged.
Note: You can use the speaker while it’s charging.
LINE IN DC IN
CHARGE
LINE IN
DC IN CHARGE
PAIR M
Step 3: Turn on
Press and hold the button on
the front of the speaker. The
power up tone sounds and the
PAIR indicator starts blinking.
After a few seconds, the speaker
goes to Bluetooth pairing mode
to set up with your smartphone.
PAIR M
PAIR M
Enable Bluetooth on your smartphone or
other device.
Step 4: Pair + Connect
If you’ve previously paired your phone or other Bluetooth device with this speaker,
the speaker will automatically attempt to reconnect to that device when you
switch the speaker on. If you want to pair to a new device, give a short double-
press to the button. The speaker gives a signal and the button starts blinking.
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
8:45PM
Make sure the PAIR indicator on the
front of the speaker is blinking rapidly.
(If it isn’t, give a short double-press on
the button. The speaker gives an audio
signal.)
PAIR M
Choose 808 CANZ PLUS from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)
The speaker gives an audio signal when it’s finished pairing and
connecting to your smartphone. The PAIR button on the front
of the speaker turns solid blue.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and specific
instructions.
To charge the speaker: Plug the included
USB cable into the DC IN jack on the back
of the speaker.
Plug the other end of the USB charging
cable into a power source, like a computer
or a USB charging adapter.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the speaker’s LINE
IN jack when you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of
roughly 33 feet (10 meters). This range may vary, however,
based on other factors, such as room layout, wall material,
obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
• If you’ve paired your device with the speaker before but you’re
having trouble reconnecting when you turn the speaker back
on, give a short press to the button while the PAIR indicator
is flashing. The speaker will attempt to connect to a previously
paired device.

To adjust the volume of your audio: Use the volume
controls on your phone.
Set your device’s volume for music to
50%.
Note: This is to make sure the sound from the
speaker isn’t too loud when you start streaming.
Start playing music or other audio
on your device. Within seconds, the
speaker starts streaming the audio
wirelessly via Bluetooth.
Step 5: Play music
8:45PM
Now playing
Media volume
8:45PM
Using the speakerphone
This speaker has a built-in
microphone, so you can use it
for phone calls as well as music.
Your phone will ring through the
speaker when you’re receiving
a call.
To answer/end the call: Press the
button on front of the speaker.
Note: Make sure you’re close enough to the
speaker’s built-in microphone so that the
other person can hear you!
IMPORTANT: Not all phones support
playback control and phone answer/end
control. Check your phone’s user manual for
more information if you’re having trouble
with these functions.
PAIR M
PAIR M
MIC
Use a 3.5mm audio cable (not
included) to connect the audio
output from your device to the LINE
IN audio input on the speaker’s back
panel.
The speaker automatically switches
to the AUX IN audio, and the PAIR
indicator on the front of the speaker
turns o.
Using the Aux In input
To listen to Bluetooth audio again, unplug the cable from the
speaker’s LINE IN jack. The speaker will try to reconnect to
the last Bluetooth device.
Speaker back
LINE IN DC IN
CHARGE
Tour of the speaker
Front
button has two functions: (1) it turns the speaker on and o
(press and hold) and (2) puts the speaker into pairing mode
(short double-press) to connect to a new Bluetooth device.
PAIR indicator shows the speaker’s pairing/connection status:
• fast blinking blue while pairing
• slow blinking blue while reconnecting
• solid blue when paired
• o when the LINE IN jack is in use or when the speaker’s o.
button answers or ends calls on a Bluetooth-connected
phone.
PAIR M
MIC is the built-in microphone for using the speaker as a
speakerphone.
Back
LINE IN jack lets you connect an audio device directly to the
speaker using a 3.5mm audio cable.
DC IN jack connects to the provided USB charging cable to
plug the speaker into a power source or adapter.
CHARGE indicator shows the charging status of the speaker:
• solid red while charging
• o when fully charged
LINE IN DC IN CHARGE
QUICK
START
GUIDE
SP888 QSG 00
If you have any questions about this product,
visit 808Audio.com or call our toll-free help line
at 1-800-732-6866.