808audio CANZ H2O User manual

WIRELESS SPEAKERS
Welcome to Canz H2O!
These speakers oer two setup options:
Single-Speaker setup for using
each speaker separately
Stereo setup for using both
speakers together
This guide takes you through the steps for
either setup option.
SP446 QSG 02

2
Make sure the following items came in this
package:
• (2) H2O speakers • (2) USB charging cables
Unpack
The best little speakers to go anywhere:
waterproof up to 3ft, and tested to withstand
full submersion for up to 30 minutes! They
even float if they fall in the water! Of course,
we don’t recommend leaving the Canz H2O in or
under water for extended periods of time—but a
little bit won’t do any harm! Just make sure the
back flap covering the USB jack is sealed.
Welcome to Canz H2O!

3
Speaker back
Charge the speakers
the included USB cables into
the jack behind this flap.
Plug the other end of the
USB charging cable into
a power source, like a
computer or a USB charging
adapter.
IMPORTANT: Make sure this
flap is closed if the speaker
is going to get wet.
Before you start using these speakers for the
first time, it’s a good idea to charge them
completely.
To charge each speaker: Open the CHARGING DC
IN flap on the back of the speaker. Plug one of
Flap open

4
Speaker
front
Press and hold the button
on the front of each speaker
to turn it on. The power
up tone sounds and the
button starts blinking white
on each speaker.
1. Turn both speakers on
Stereo Setup (both speakers together)
Wait for the speakers to announce “Left
connected” and “Right connected.”
Right speaker
Solid white
Left speaker
Blinking white
The button on
the right speaker
turns solid white (it
keeps blinking on
the left speaker).

5
Enable Bluetooth on your smartphone or other
device (if it isn’t already on).
Make sure the button on the front of the
left speaker is blinking rapidly. (If it isn’t, give
a short double-press on the button. The
speaker gives an audio signal.) NOTE: Keep the
left speaker close to your Bluetooth device—
it’s the one making the Bluetooth connection.
Choose 808 CANZ H2O ST from the pairing
options on your smartphone. (If it’s not in the
list, choose “Scan” from your phone’s Bluetooth
menu.)
2. Pair and connect to your phone
This means the two speakers are linked for
stereo and ready to pair with your Bluetooth
device.

6
The speaker gives an audio signal when
it’s finished pairing and connecting to your
smartphone. The button turns solid white,
blinking every 5 seconds.
Note: The process of enabling Bluetooth and
connecting varies from device to device. See your
device’s owners manual for more information and
specific instructions.
3. Play music
Set your device’s volume for music to 75%.
Start playing music or other audio on your
device. Within seconds, the speakers start
streaming the audio wirelessly via Bluetooth.
To adjust the volume of your audio: Use the
volume controls on your phone.
Stereo Setup (continued)

7
If you’ve previously paired your phone or other
Bluetooth device with this speaker, the speaker will
automatically attempt to reconnect to that device
when you switch the speaker on. If you want to pair
to a new device, give a short double-press to the
button. The speaker gives a signal and the button
starts blinking.
Bluetooth Wireless Connection Tips
•Make sure the Bluetooth capability of your device is
turned on.
• The Bluetooth wireless connection works up to a range of
roughly 33 feet (10 meters). This range may vary, however,
based on other factors, such as room layout, wall
material, obstacles, your device’s Bluetooth performance,
etc. If you’re having problems connecting to this speaker,
move closer to it.
•If your device asks you for a password to connect, use
“0000”.
To play/pause: If you’re playing music via
Bluetooth, press once on the speaker’s button.

8
Single Setup (each speaker separately)
Speaker
front
Press and hold the button
on front of one speaker to
turn it on. Don’t turn the
other speaker on yet!
The power up tone sounds
and the button starts
blinking white on this
speaker, then starts blinking
blue.
1. Turn one speaker on
Blinking blue

9
2. Pair and connect to your phone.
Enable Bluetooth on your smartphone or other
device (if it isn’t already on).
Make sure the button on the front of the
speaker is blinking blue rapidly. (If it isn’t, give
a short double-press on the button. The
speaker gives an audio signal.)
Choose 808 CANZ H2O ST from the pairing
options on your smartphone. (If it’s not in
the list, choose “Scan” from your phone’s
Bluetooth menu.)
The speaker gives an audio signal when
it’s finished pairing and connecting to your
smartphone. The button turns solid blue.

10
Single Setup (continued)
Note: The process of enabling Bluetooth and
connecting varies from device to device. See your
device’s owners manual for more information and
specific instructions.
See the Bluetooth Wireless Connection Tips section on
page 7 for info and troubleshooting.
3. Play music
Set your device’s volume for music to 75%.
Start playing music or other audio on your
device. Within seconds, the speaker starts
streaming the audio wirelessly via Bluetooth.
To adjust the volume of your audio: Use the
volume controls on your phone.
To play/pause: If you’re playing music via
Bluetooth, press once on the speaker’s button.