8BITDO 80FE User manual

8BitDo Arcade Stick
Instruction Manual
* power off: t urn the mode switch to OFF
* connection priority: wired connection > 2.4g wireless / Bluetooth connection
Switch
* motion controls, NFC scanning, IR camera, HD rumble, notification LED are not
su orted, nor can the system be waken u wirelessly
2.4g connection
1. ut the connection switch to 2.4G
2. turn the mode switch to S mode, LEDs start to blink
3. lug the receiver into the USB ort on Switch. Arcade stick will auto connect to
the receiver
4. LEDs on both the arcade stick and receiver will become solid when connection is
successful
* ress home button to continue to use the arcade stick when it is already on S
mode
* Switch system needs to be 3.0.0 or above for 2.4g connection. Go to System
Setting > Controller and Sensors > turn on Pro Controller Wired Communication
Bluetooth connection
1.
ut the connection switch to BT
80FE

2. turn the mode switch to S mode, LEDs start to blink
3. ress and hold air button for 3 seconds to enter its airing mode, LEDs start to
rotate clockwise (this is required for the very first time only)
4. go to your Switch Home Page to click on Controllers, then click on Change
Gri /Order
5. LED becomes solid when connection is successful
* ress home button to continue to use the arcade stick when it is already on S
mode.
* arcade stick will auto reconnect to your Switch on S mode once it has been aired.
wired connection
1. turn the mode switch to S mode, LEDs start to blink
2. connect the arcade stick to your Switch dock via its USB-C cable
3. wait till the arcade stick is successfully recognized by your Switch to lay
* Switch system needs to be 3.0.0 or above for wired connection. Go to System
Setting > Controller and Sensors > turn on Pro Controller Wired Communication
* LED lights indicate the layer number, 1 LED indicates layer 1, 2 LEDs indicate
layer 2, 4 is the maximum number of layers the arcade stick su orts
Windows (X-input)
2.4g connection

1. ut the connection switch to 2.4G
2. turn the mode switch to X mode, LEDs start to blink
3. lug the receiver into the USB ort on your Windows device. Arcade stick will
auto connect to the receiver
4. LEDs on both the arcade stick and receiver will become solid when connection is
successful
* ress home button to continue to use the arcade stick when it is already on X
mode.
Bluetooth connection
* required system: Windows 10 (1703) or above. Bluetooth 4.0 is su orted
1. ut the connection switch to BT
2. turn the mode switch to X mode, LEDs start to blink
3. ress and hold air button for 3 seconds to enter its airing mode, LEDs start to
rotate clockwise (this is required for the very first time only)
4. go to your Windows device’s Bluetooth setting, air with 8BitDo Arcade Stick
5. LED becomes solid when connection is successful
* ress home button to continue to use the arcade stick when it is already on X
mode
* arcade stick will auto reconnect to Windows on X mode once it has been aired

wired connection
1. turn the mode switch to X mode, LEDs start to blink
2. connect the arcade stick to your Windows device via its USB-C cable
3. wait till the arcade stick is successfully recognized by your Windows device to
lay
* LED lights indicate the layer number, 1 LED indicates layer 1, 2 LEDs indicate
layer 2, 4 is the maximum number of layers the arcade stick su orts
Turbo function
1. hold the button you would like to set turbo functionality to and then ress star
button to activate its turbo functionality
2. LED will blink when the button with turbo functionality is ressed
3. hold the button with turbo functionality first then ress star button to deactivate
its turbo functionality, LED will cease to blink
* joystick, home, select and start buttons are not included
control stick switch
use the control stick switch to shift the joystick function to either left joystick(LS),
directional ad (DP), or right joystick (RS)

LS: Left joystick
DP: D- ad
RS: Right joystick
customize profile
It gives you elite control over every iece of your arcade stick: customize button
ma ing and create macros with any button combination.
e.g. create macros and more with P1, P2
lease visit su ort.8bitdo.com/ultimate-software.html for the a lication
battery
status LED Indicator
low battery mode red LED blinks
battery charging red LED stays solid
battery fully charged red LED turns off
built-in 1000mAh Li-on battery with 40 hours of lay time on 2.4g connection and
30 hours on Bluetooth connection
rechargeable with 4 hour charging time
arcade stick will turn off in 1 minute with no connection and 15 minutes with 2.4g
wireless / Bluetooth connection but no use
arcade stick stays on with wired connection

retrieve a lost connection or connect to a new receiver
1. ut the connection switch to 2.4G
2. turn the mode switch to S or X mode, LEDs start to blink
3. lug the receiver into your Switch or Windows device
4. ress and hold air button for 3 seconds to enter its airing mode, LEDs start to
rotate clockwise
5. LED becomes solid when connection is successful
* 2.4g receiver can only connect to one arcade stick at a time
support
lease visit su ort.8bitdo.com for further information and additional su ort
FCC regulatory confor ance ：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equip ent has been tested and found to co ply with the li its for a Class B
digital device, pursuant to part 15 of the FCC Rules. These li its are designed to provide
reasonable protection against har ful interference in a residential installation.
This equip ent generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, ay cause har ful interference to radio
co unications. However, there is no guarantee that interference will not occur in a
particular installation. If this equip ent does cause har ful interference to radio or
television reception, which can be deter ined by turning the equip ent off and on, the user

is encouraged to try to correct the interference by one or ore of the following easures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equip ent and receiver.
-Connect the equip ent into an outlet on a circuit different fro that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The anufacturer is not responsible for any radio or TV interference caused by
unauthorized odifications to this equip ent. Such odifications could void the user’s
authority to operate the equip ent.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.