AAXA Technologies ST200 User manual

aaxa
TECHNOLOGIES
User Guide

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving.
DO NOT expose to water or wet
surfaces. Electric shock may occur.
DO NOT expose the projected LED
image to your eyes or the eyes of
others.
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat.
Keep the projector, battery, or
charger away from any heat
sources.
Caution for Battery Use
• Do not pierce or puncture the battery
with sharp objects.
• Do not heat the product or expose it to
high temperature.
• Do not wet it or place it in any liquid.
Caution for Headphone Use
• Prolonged use at high volume may
impair your hearing.
• High volume during walking or driving
may cause distractions and result in
injury or death.

Table of Contents
Chapter 1: ST200 at a glance
Main Unit Front/Back
Remote & Keypad
Accessories
Chapter 2: Getting Started
Powering On / OFF
Focus Adjustment / Short-Throw
Optics
Battery Installation
Connecting to a Computer VGA
Connecting to a Computer HDMI
Connecting to Composite Video
Connecting to HDMI Video
Connecting to Speaker or Head-
phones
1
2
3
4
5
6
7
9
11
13
15
16
18
20
21
23
24
26
27
29
30
31
36
38
39
40
Connecting a Micro SD Card
Connecting to a USB Host
Chapter 3: Menu Screens
Portable Media Player
Video Player Menu
Video FAQ
Photo Viewer Menu
Photo FAQ
Music Player Menu
Music FAQ
Ebook Viewer Menu
Setup Menu
Keystone Adjustments
Chapter 4: Technical Details
Troubleshooting
Specications

ST200 at a Glance
1
Chapter 1
Power On/Off
Main Menu
Navigation
DC Power
Micro SD Card
Headphone Out
USB Port
Main Unit Front/Back
AV Input
Power Switch
Power Button
VGA Input
HDMI
Focus Wheel

Remote & Keypad
2
NOTICE: Pressing power on the remote will only put the projector in STANDBY
mode. Please switch the On / Off switch of the projector to the “Off” position if you
want to turn it off.
Power On/Off
Main Menu
Navigation
Select Source
Media Player Menu
Navigation
Input Exit/Back
Direction Pad
Both the keypad and remote can be used to navigate through the menus. The “Main Menu
Navigation” on the remote functions exactly the same as the directional pad on the ST200
unit. The Media Player Menu Navigation allows you to control the media you are currently
playing. There is also an Input source button and a keystone up/down on the remote control.
You may also control the volume with the mute button or with the volume up and volume
down buttons.
On / Off

Accessories
3
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Tripod Remote
Power Adapter
VGA Cable
A/V Cable

Getting Started
1. Connect the power cord to the ST200.
2. Connect the wall plug into the wall power source.
3. Switch the On/Off switch on the side of the projector to the “On” position. The
projector should turn on automatically. If the projector does not turn on automati-
cally with the On/Off switch to “On” position press the power button on the top of the
projector or press the power button on the remote control.
4
Powering ON the projector
Chapter 2
Standby Mode
1. Stand By Mode – To enter “stand by mode” press the power button on top of the
projector twice. This will put the projector into “stand by mode”. In “stand by mode”
the projector is idle but is able to be powered on with the remote control or “wake up
feature” (custom models only). “Stand by mode” consumes power even when the
projector is idle.
Note: The ST200 Projector battery does not charge when the projector is in
operation.
Powering OFF the projector
1. Switch the On/Off switch to “Off” to turn off the projector.

Focus Adjusment /Short-Throw Optics
Focus Adjustment
• Spin the focus wheel left or right until the image becomes clear.
5
DIAGONAL SCREEN SIZE
16:9 Aspect Ratio
Throw Distance Chart
Distance inch (“)
12
24
36
48
60
72
Diagonal Inch (“)
17
34
52
69
86
103
Throw Ratio 0.8
*minimum throw distance: 10 inches
Short-Throw Optics
• The ST200 incorporates a short-throw optical system. Short-
throw optics have the advantage of delivering a brighter and
larger image at a shorter “throw” distance. The calculation of a
projector’s throw ratio is (distance / picture width) and the ratio
for the ST200 is 0.8.

Installing the Battery Pack
6
Step 1. Unplug ST200 from the power adapter and power switch to “OFF”
position.
Step 2. Remove the (3) screws holding the battery to ST200 casing.
Step 3. Remove the battery casing and disconnect battery from recep-
tacle.
Step 4. Connect the new battery harness to the receptacle on the PCBA.
Step 5. Install the battery until it ts in correctly onto the ST200 and rein-
stall the (3) screws
Note: The ST200 Projector already comes with the battery preinstalled.

Connecting to a Computer via VGA
Connect the large end of the
7
VGA Cord
to your computer’s
VGA Adapter
Connect the small end of the
VGA Cord
to your ST200’s
VGA Adapter
Step 1:
Step 2:
Step 3:
In the Main Menu
Select “VGA” iconSelect “INPUT” icon

Connecting to a Computer Cont.
Step 4:
Enabling VGA or HDMI output on your Computer – To enable VGA or HDMI output on your com-
puter most computers require “turning on” the video output feature. Each computer is different.
Please consult your owner’s manual for instructions to enable VGA or HDMI output. Below are
standard instructions for a Windows 7 computer – not all systems are the same.
Press Windows+P to toggle through
display settings. Select either “Du-
plicate” or “Extend” depending on
your viewing option.
*NOTE: different operating systems
may differ
Step 5:
1. Right click on computer
desktop and select “Screen
Resoluton”.
2. Display Properties window
will pop up.
3. If a secondary monitor is
grayed out, click on it and se-
lect “Extend these displays”
in the “Multiple Displays” drop
down.
4. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x720.
Step 6:
8

Connecting to a Computer via HDMI
Connect one end of the
9
HDMI Cord
to your computer’s
HDMI Adapter
HDMI Cord
to your ST200s
HDMI Adapter
Step 1:
Step 2:
Step 3:
Select “INPUT” icon
In the Main Menu
Connect one end of the
Select “HDMI” icon

Connecting to a Computer Cont.
Step 4:
Enabling VGA or HDMI output on your Computer – To enable VGA or HDMI output on your com-
puter most computers require “turning on” the video output feature. Each computer is different.
Please consult your owner’s manual for instructions to enable VGA or HDMI output. Below are
standard instructions for a Windows 7 computer – not all systems are the same.
Press Windows+P to toggle
through display settings. Select
either “Duplicate” or “Extend” de-
pending on your viewing option.
*NOTE: different operating sys-
tems may differ
Step 5:
1. Right click on computer
desktop and select “Screen
Resolution”.
2. Display Properties window
will pop up.
3. If a secondary monitor is
grayed out, click on it and se-
lect “Extend these displays”
in the “Multiple Displays” drop
down.
4. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x720.
Step 6:
10

Connecting to Composite Video
Connect one end of the
Composite Cord
to your ST200’s
A/V Adapter
Connect opposite end of to your devices
Step 1:
Step 2:
Composite Cord Composite Cord
11

Connecting to Composite Video Cont.
Connectivity with multimedia devices
The ST200 can connect to many media devices including: iPod, iPhone, iPad, VHS
players, DVD players, smart phones, cameras, video game consoles and other
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the
ST200. 12
Step 3:
Select “INPUT” icon
In the Main Menu
Turn on your multimedia device.
Step 4:
Select “AV” icon

Connecting to HDMI Video
Connect one end of the
HDMI
to your ST200’s
HDMI Adapter
to your devices
Step 1:
Step 2:
HDMI Adapter
13
Connect one end of the
HDMI
14

Connecting to HDMI Video Cont.
Connectivity with multimedia devices
The ST200 can connect to many media devices including: iPod, iPhone, iPad, VHS
players, DVD players, smart phones, cameras, video game consoles and other
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the
ST200. 14
Step 3:
In the Main Menu
Turn on your multimedia device. If avaiable select 1280x720 or 1920x1080
Step 4:
HDMI Adapter
Select “INPUT” icon Select “HDMI” icon

Connecting Speakers/Headphones
Connect your speakers/headphones
to the projector’s speaker adapter.
15
3.5 mm cord Speaker Adapter
Step 1:
Step 2:
CAUTION for Headphone Use
• Prolonged use at high volume may impair
hearing.
Ensure the power and volume on your
speaker or headphones is turned on.
Step 3: Place the headphones on and enjoy!

Micro SD Card
16
How to insert your Micro SD Card
• Slide in your SD card into the SD card
slot on the left side of the ST200. (as
shown in picture)
• Gently slide the SD card until it clicks
into place.
*Review the Specication
section of this manual to read
about the supported le
formats.
How to access your Micro SD Card
• Once your SD Card has been inserted,
you can navigate to any media content
in the main menu.
• After selecting the media content,
choose the SD card selection.
• You can now access the data on your
SD card through the onboard media
player.
Speaker Adapter

Micro SD Card Cont.
17
Media Player menu
• In the Media Player selection you can
choose from Videos, Audio, Pictures,
and Text.
• Select the appropriate menu for the type
of le you wish to view.
Return: Brings you
back to the main
menu
File Menu System
• The ST200 will show all folders and
les you have on your SD Card in the
C: drive.
• Use the directional buttons to navigate
to different folders or les.