AAXA Technologies P300 User manual

aaxa
TECHNOLOGIES
User Guide
P3OO Pico Projec-

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving
DO NOT expose to water or wet
surfaces. Electric shock may occur.
DO NOT expose the projected LED
image to your eyes or the eyes of
others
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat
Keep the projector, battery, or
charger away from any heat sources
Caution for Battery Use
• Do not pierce or puncture the battery
with sharp objects
• Do not heat the product or expose it to
high temperature.
• Do not wet it or place it in any liquid
Caution for Headphone Use
• Prolonged use at high volume may
impair your hearing.
• High volume during walking or driving
may cause distractions and result in
injury or death

Table of Contents
Chapter 1: P300 at a glance
Main Unit Front/Back
Remote & Keypad
Accessories
Chapter 2: Getting Started
Powering On / OFF
Focus Adjustment / Throw
Distance
Battery Installation
Connecting to a Computer VGA
Connecting to a Computer HDMI
Connecting to Composite Video
Connecting to HDMI Video
Connecting to Speaker or Head-
phones
1
2
3
4
5
6
7
8
10
12
14
16
17
19
21
22
24
25
27
28
30
31
32
37
39
40
41
Connecting a Micro SD Card
Connecting to a USB Host
Chapter 3: Menu Screens
Main menu
Video Player Menu
Video FAQ
Photo Viewer Menu
Photo FAQ
Music Player Menu
Music FAQ
Ebook Viewer Menu
Setup Menu
Keystone Adjustments
Chapter 4: Technical Details
Troubleshooting
Specications 1

P300 at a Glance
2
Chapter 1
Power On/Off
Main Menu
Navigation
Power Switch
Micro SD Card
Headphone Out
USB Port
Main Unit Front/Back
VGA Port
AV Input
Power Button
DC Adapter Port
HDMI
Focus Adjustment

PWR Gamma
MENU U
UP EXIT
VOL-
OK
VOL+
I
U/D DOWN R/L
VGA Menu AV
Menu
Remote & Keypad
3
NOTICE: Pressing power on the remote will only put the projector in STANDBY
mode. Please press the power button on the projector if you want to turn it off.
Power On/Off
Main Menu
Navigation
Select Source
Media Player Menu
Navigation
Input Exit/Back
Direction Pad
Both the keypad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the P300 unit.
On / Off
LED Lights

Accessories
4
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Tripod Remote
Power Adapter
VGA Cable
A/V Cable
PWR Gamma
MENU U
UP EXIT
VOL-
OK VOL+
I
U/D DOWN R/L
VGA Menu AV
Menu
Internal Battery
(sold separately)

Getting Started
1. Connect the power cord to the P300.
2. Connect the wall plug into the wall power source.
3. Switch the On / Off switch on the side of the projector to the “ON” position to enter
“standby” mode
4. Press POWER button on the keypad and hold for 2-3 seconds to start the projector
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and hold the power button on the keypad for 3 seconds.
2. The optical engine should power off and the fan should stop spinning. The projector
is now in “stand by mode” and can be turned on using the remote control. “Stand by
mode” consumes a little bit of power
3. To fully turn off the projector, switch the On / Off switch on the side of the projector to
the “Off” position
Note: The P300 Projector battery does not charge when it is in operation.

Focus Adjusment / Throw Distance
Focus Adjustment
• Spin the focus wheel up or down until the image becomes
clear.
6
DIAGONAL SCREEN SIZE
16:9 Aspect Ratio
Throw Distance Chart
Distance inch (“)
20
30
40
50
60
70
80
90
Diagonal Inch (“)
17
25
34
42
51
59
68
76
Throw Ratio 1.38
*minimum throw distance: 10 inches

Installing the Battery Pack
7
1. Remove the three screws circled in blue holding
the P300 battery.
2. Connect the battery harness to the battery recep-
tacle on the PCBA
3. Install the new battery housing

Connecting to a Computer via VGA
Connect the large end of the
8
VGA Cord
to your computer’s
VGA Adapter
Connect the small end of the
VGA Cord
to your P300’s
VGA Adapter
Step 1:
Step 2:
Step 3:
In the Main Menu
Select “VGA” iconSelect “INPUT” icon

Connecting to a Computer Cont.
Step 4:
Enabling VGA or HDMI output on your Computer – To enable VGA or HDMI output on your com-
puter most computers require “turning on” the video output feature. Each computer is different.
Please consult your owner’s manual for instructions to enable VGA or HDMI output. Below are
standard instructions for a Windows XP computer – not all systems are the same.
Press function & “F5” to instruct
the computer to enable multiple
displays.
You can also press Windows+P to
toggle through display settings.
*NOTE: different operating sys-
tems may differ
Step 5:
1. Right click on computer desk-
top and select “Properties”
2. Display Properties window
will pop up
3. Click on the “Settings” Tab
4. If a secondary monitor is
grayed out, click on it and
check “Extend my Windows
Desktop onto this monitor”
5. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x800.
Step 6:
9

Connecting to a Computer via HDMI
Connect one end of the
10
HDMI Cord
to your computer’s
HDMI Adapter
HDMI Cord
to your P300s
HDMI Adapter
Step 1:
Step 2:
Step 3:
Select “INPUT” icon
In the Main Menu
Connect one end of the
Select “HDMI” icon

Connecting to a Computer Cont.
Step 4:
Enabling VGA or HDMI output on your Computer – To enable VGA or HDMI output on your com-
puter most computers require “turning on” the video output feature. Each computer is different.
Please consult your owner’s manual for instructions to enable VGA or HDMI output. Below are
standard instructions for a Windows XP computer – not all systems are the same.
Press function & “F5” to instruct
the computer to enable multiple
displays.
You can also press Windows+P to
toggle through display settings.
*NOTE: different operating sys-
tems may differ
Step 5:
1. Right click on computer desk-
top and select “Properties”
2. Display Properties window
will pop up
3. Click on the “Settings” Tab
4. If a secondary monitor is
grayed out, click on it and
check “Extend my Windows
Desktop onto this monitor”
5. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x800.
Step 6:
11

Connecting to Composite Video
Connect one end of the
Composite Cord
to your P300’s
A/V Adapter
Connect opposite end of to your devices
Step 1:
Step 2:
Composite Cord Composite Cord
12

Connecting to Composite Video Cont.
Connectivity with multimedia devices
The P300 can connect to many media devices including: iPod, iPhone, iPad, VHS
players, DVD players, smart phones, cameras, video game consoles and other
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the P300.13
Step 3:
Select “INPUT” icon
In the Main Menu
Turn on your multimedia device.
Step 4:
Select “AV” icon

Connecting to HDMI Video
Connect one end of the
HDMI
to your P300’s
HDMI Adapter
to your devices
Step 1:
Step 2:
HDMI Adapter
14
Connect one end of the
HDMI
14

Connecting to HDMI Video Cont.
Connectivity with multimedia devices
The P300 can connect to many media devices including: iPod, iPhone, iPad, VHS
players, DVD players, smart phones, cameras, video game consoles and other
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the P300.15
Step 3:
In the Main Menu
Turn on your multimedia device. If avaiable select 1280x720 or 1920x1080
Step 4:
HDMI Adapter
Select “INPUT” icon Select “HDMI” icon

Connecting Speakers/Headphones
Connect your speakers/headphones
to the projector’s speaker adapter.
16
3.5 mm cord Speaker Adapter
Step 1:
Step 2:
*CAUTION for Headphone Use
• Prolonged use at high volume may impair
hearing
Ensure the power and volume on your
speaker or headphones is turned on
Step 3: Place the headphones on and enjoy!

Micro SD Card
17
How to insert your Micro SD Card
• Slide in your SD card into the SD card
slot on the front of the P300. (as shown
in picture)
• Gently slide the SD card until it clicks
into place.
*Review the Specication
section of this manual to read
about the supported le
formats.
How to access your Micro SD Card
• Once your SD Card has been inserted,
you can navigate to any media content
in the main menu..
• After selecting the media content,
choose the SD card selection.
• You can now access the data on your
SD card through the onboard media
player
Speaker Adapter

Micro SD Card Cont.
18
Media Player menu
• In the Media Player selection you can
choose from Videos, Audio, Pictures,
and Ebooks.
• Select the appropriate menu for the type
of le you wish to view.
Return: Brings you
back to the main
menu
File Menu System
• The P300 will show all folders and les
you have on your SD Card in the C:
drive.
• Use the directional buttons to navigate
to different folders or les.