AB Quality MobileView T750 User manual
Publication 2727-QS001D-MU-P - March 2002
Quick Start
MobileView™ Tablet T750
(Cat. No. 2727-T7P30D1Fxx)
Inside. . .
English Section ......................................................................................................3
Section en français ..............................................................................................19
Deutscher Abschnitt ............................................................................................35
Sezione italiana ...................................................................................................51
Sección en espanol..............................................................................................67
Seção em Portugués............................................................................................83
MobileView
2MobileView™ Tablet T750
Publication 2727-QS001D-MU-P - March 2002
Publication 2727-QS001D-MU-P
Quick Start
MobileView™ Tablet T750
(Cat. No. 2727-T7P30D1Fxx)
English Section
Inside. . .
Controls and Indicators ........................................................................................ 4
I/O Ports ............................................................................................................... 5
Installing the Battery ........................................................................................... 6
Startup/Power On ................................................................................................ 7
RF Network Configuration ................................................................................... 8
Starting Terminal Services ................................................................................. 12
Shut Down/Suspend .......................................................................................... 14
Cleaning the MobileView Tablet ....................................................................... 14
Specifications/Accessories ............................................................................... 15
For More Information ......................................................................................... 17
MobileView
Touch Screen
Program Buttons
Navigational
Arrow Buttons
Speaker
Start/Enter Button Notification Indicator LEDs
Microphone
Next, Previous, Plus and
Minus buttons
Stylus
Screen Contrast
Screen
Brightness
Battery Status LEDs RF Antenna
4MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Controls and Indicators
The MobileView Tablet contains the following controls and indicators. Detailed
information about using each control and indicator is given in publication
2727-UM001B, MobileView™ Tablet T750 User Manual.
Control/Indicator Symbol Description
N/A Battery Status LEDs: The LEDs indicate the battery charge level.
A fully charged battery is represented by having all five green
indicators lit.
Screen Brightness: Press the buttons with the stylus to increase
or decrease brightness.
Screen Contrast: Press the buttons with the stylus to increase or
decrease contrast.
Opens terminal server client (configurable).
Opens wireless link status (configurable).
Opens on-screen keyboard (configurable).
Opens Windows Explorer (configurable).
Navigational Arrow Buttons: The navigational buttons can move
the current selection up, down, left, or right. Pressing the left
and right arrow buttons simultaneously performs the same
function as pressing the Esc (Escape) key on a computer
keyboard.
Start/Enter Button: Press this button to power up the
MobileView Tablet T750 after it has been powered down or to
enter an active selection.
N/A Notification LEDs: The LEDs can glow green, yellow or red. They
are programmable and can be used to notify the user of an
event, such as a low battery warning.
Next and Previous Buttons: The next and previous buttons are
programmed to move to the next or previous selection
(configurable).
Plus and Minus Buttons: The plus (+) and minus (-) buttons
operate similar to the same PC keyboard buttons depending on
the context of current active application (configurable).
MobileView™ Tablet T750 5
Publication 2727-QS001D-MU-P
I/O Ports
Top End
Foot Switch Port
RF Antenna
Infrared Port
Digital Gage Port
Barcode Port
Bottom End
External Audio
Video/Monitor Connector
Notification LEDs
USB Ports
External Power
Receptacle
RS-232 Port Battery Pack Reset Button
6MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Installing the Battery
1. Slide the battery into the battery
compartment until the battery cover plate is
flush with the Tablet case, then slide the
cover plate up. You should feel the battery
snap into place.
2. To close the battery compartment, gently slide
the battery cover-plate up.
ATTENTION
!
Install only the battery supplied with your MobileView Tablet.
Use of any other battery could result in a hazard to the
operator and damage to equipment.
MobileView™ Tablet T750 7
Publication 2727-QS001D-MU-P
Startup/Power On
Press the ENTER button to turn the MobileView Tablet
ON.
If the battery level is sufficient enough, the following
power-up screen should appear.
If power-up screen does not appear, connect the MobileView Tablet to the ac
adapter/charger to operate on ac power and charge the battery.
Using the AC Adapter/Charger
Plug the jack end of the cable from the AC adapter
into the charger port as shown. The battery will
recharge when connected to external power.
IMPORTANT Use only the AC Adapter supplied
with your MobileView Tablet. Using
another type of adapter may cause
a malfunction or damage the
battery pack.
8MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Power Save Reactivation
The MobileView Tablet T750 also includes a battery power saving feature that
suspends Tablet operations, including screen operations, if Tablet is idle beyond
suspend timer setting. The default setting is 5 minutes. To reactivate Tablet, press
any of the program, navigational, or start/enter buttons. If the AC Adapter/Charger
is connected, tapping the touch screen will also reactivate the Tablet.
RF Network Configuration
IP Address Configuration
The internal Aironet wireless LAN adapter is preconfigured to obtain an IP address
via DHCP. If a specified IP address is desired, perform the following steps.
Remote Communication
Your network configuration affects how you remotely communicate with an
internet, intranet, or between two or more MobileView Tablets. Since there are a
variety of possible network configurations, we recommend you contact your
network administrator or internet service provider (ISP) to help set up remote
communications. The network administrator or ISP should be able to provide the
necessary configuration information, such as the network configuration settings, the
network architecture, and an IP address for the Tablet (if needed with your
installation).
The following is an example of a remote communication setup, using a radio
frequency (RF) network interface card, installed inside the MobileView Tablet. This
installation also requires a properly configured access point for the RF signal.
Example of an RF Network Configuration
1. Tap on the Start button and select Settings, Control Panel from the menu.
2. Double-tap on the Network icon.
3. Tap the Adapters tab in the Network Configuration dialog box.
4. Select Aironet Wireless LAN Adapter from the list of drivers, then tap the
Properties button.
MobileView™ Tablet T750 9
Publication 2727-QS001D-MU-P
5. Tap the IP address tab and select either “Obtain an IP address via DHCP” or
“Specify an IP address”, depending on your network configuration. If you
select to specify an IP address, you need to fill out the information in the
three text boxes with information from your network administrator or ISP.
Use the on-screen keyboard to enter the text. The on-screen keyboard is
accessed by taping the keyboard icon on the task bar.
6. Tap OK in the settings dialog box. A notification appears, informing you that
you will need to either remove and reinstall your card or restart the
computer for your new settings to take effect. Tap OK.
7. Tap OK in the Network Configuration dialog box.
Selected RF
Network Driver
Properties button
Adapters tab
DHCP option
selected
(1)
(2)
(3)
(1) Must be a unique address from all others on the LAN.
(2) Must be identical to the server subnet mask.
(3) This is optional.
10 MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
8. Press and quickly release the Reset button with the stylus to restart the
Tablet.
Wireless Adapter Setup
To communicate successfully, the internal Aironet wireless LAN adapter properties
must be set to match your server’s wireless LAN adapter or wireless access points
properties.
To set internal Aironet wireless LAN adapter properties:
1. Tap the Start button on the task bar.
2. Select Programs and then the Wireless Utilities folder.
3. Tap Aironet Setup selection to activate setup window.
IMPORTANT Do not press and hold in the reset button for more than a
second or you will start a full reset where all data on the Tablet
is deleted and parameters are reset to their initial default
settings.
MobileView™ Tablet T750 11
Publication 2727-QS001D-MU-P
4. Enter the appropriate property selections and values. Use the on-screen
keyboard shown above to enter alphanumeric characters where needed.
On-screen keyboard can be accessed by taping the keyboard icon on the
task bar.
Confirming Wireless Link
Once RF network configuration is completed and PC wireless LAN adapter or
wireless access points are enabled, follow the steps below to confirm wireless link.
1. Tap the Start button on the task bar.
2. Select Programs and then the Wireless Utilities folder.
3. Tap the Aironet Link Status selection to activate status window.
12 MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Status screen should indicate overall link status as “Good” or “Excellent”. Refer to
publication 2727-UM001B, MobileView Tablet T750 Users Manual for more
troubleshooting information.
Starting Terminal Services
To connect to a terminal server as a CE client, follow these steps:
1. Double tap the Terminal Server Client shortcut on the Tablet’s desktop or
select the Terminal Server Client application from the Programs/Terminal
Server Client folder of the Start menu.
MobileView™ Tablet T750 13
Publication 2727-QS001D-MU-P
2. Enter the Terminal Server’s name or valid TCP/IP address in the server box
using the on-screen keyboard or select one of the server names or addresses
listing in the recent servers box.
3. Tap the connect button.
A server logon window, similar to the one shown below, should appear.
14 MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Enter your user name and password to operate as an active CE client.
Shut Down/Suspend
1. Close down all applications that are running on CE client.
2. Tap the Start button on the CE client task bar, select Shutdown and then
choose Log Off Administrator to disconnect from terminal server.
3. From Tablet power-up screen, tap the Start button on the task bar and then
select Suspend to shut down power to all Tablet components except RAM
memory.
Cleaning the MobileView Tablet
For the touch screen, clean gently with a lint-free cloth. Dampen with a mixture of
50% water and 50% Isopropyl Alcohol if needed. Clean the unit daily when
working in harsh environments.
MobileView™ Tablet T750 15
Publication 2727-QS001D-MU-P
For additional touch screen protection, apply the anti-glare protective overlay
(Allen-Bradley catalog number 2727-TRG7) provided with the Tablet.
For the case, dampen a cloth with a mixture of 50% water and 50% Isopropyl
Alcohol or mild detergent. Use no harsh cleaning additives.
Specifications/Accessories
Specifications
IMPORTANT Do not use detergents or other harsh cleaning additives on the
touch screen.
Description Specification
Processor Hitachi SH-4 RISC (SH-7750)
Operating System Microsoft Windows CE
Memory 32 MB Flash, 32 MB SDRAM, 32 MB RAM Back-up and File
Storage
Wireless Technology WiFi Compliant 802.11b Direct Sequencing
TxPower: 15 dBm
Rx Sens: -83 dBm to -90 dBm
Range at 1 Mbps1: 460m Open Environment
90m Typical Office Environment
Range at 11 Mbps1: 120m Open Environment
30m Typical Office Environment
Display Passive LCD 7.7 inch 640 x 480 with 256 colors
Touch Screen 7.7 inch analog resistive
Weight 1.36 kg (4 lbs)
Dimensions (LxWxH) 28 cm x 22 cm x 5 cm (11 in x 8.4 in x 2 in)
Battery Lithium Ion 3100 mAh (8 hour typical operation)
Operating Temperature +0°C to +45°C (+32°F to +113°F)
Humidity 95% non-condensing
Agency Certification CE, UL, ETS, FCC, Canadian Interference
16 MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Accessories
Description Catalog
Number
AC Adapter/Battery Charger with North American Power Cable
with Italian Power Cable
with European Power Cable
with United Kingdom Power Cable
2727-TRA7
2727-TRA7IT
2727-TRA7EU
2727-TRA7UK
Replacement Battery 2727-TRB7
Power Kit with Battery, Single Charging Station, Power Supply, and North American Power Cable
with Italian Power Cable
with European Power Cable
with United Kingdom Power Cable
2727-TRSP1
2727-TRSP1IT
2727-TRSP1EU
2727-TRSP1UK
Quad Charging Station with Power Supply and North American Power Cables
with Italian and North American Power Cables
with European and North American Power Cables
with United Kingdom and North American Power Cables
2727-TRSP4
2727-TRSP4IT
2727-TRSP4EU
2727-TRSP4UK
Anti-glare Protective Overlay (Qty. 10) 2727-TRG7
Stylus with Tether (Qty. 5) 2727-RY1
Serial Cable for PC Interface 2727-TRC1
MobileView™ Tablet T750 17
Publication 2727-QS001D-MU-P
For More Information
Related Publications
If you would like a manual, you can:
•access publication electronically from the CD provided with the MobileView
Tablet
•download a free electronic version from the internet:
www.theautomationbookstore.com
•purchase a printed manual by:
–contacting your local distributor or Rockwell Automation representative
–visiting www.theautomationbookstore.com and placing your order
–calling (1) 800 963-9548 (USA/Canada)
or (001) 330 725-1574 (Outside USA/Canada)
For Refer to this Document Pub. No.
A more detailed description on how to use your
MobileView Tablet, accessories, specifications and
standards.
MobileView Tablet T750User
Manual 2727-UM001B-EN-P
Instructions on Flash Update procedures for your
MobileView Tablet. MobileView Table T750 Flash
Update 2727-GR001A-EN-P
18 MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Publication 2727-QS001D-MU-P
Guide de prise en main
MobileView™ Tablet T750
(Réf. 2727-T7P30D1Fxx)
Section en français
Sommaire
Commandes et voyants ...................................................................................... 20
Ports E/S ............................................................................................................ 21
Installation de la pile ......................................................................................... 22
Démarrage/Mise sous tension .......................................................................... 23
Configuration du réseau RF ............................................................................... 24
Démarrage des services Terminal Server .......................................................... 28
Fermeture/Interruption ...................................................................................... 30
Nettoyage de MobileView Tablet ...................................................................... 30
Spécifications/Accessoires ............................................................................... 31
Informations complémentaires .......................................................................... 33
MobileView
Ecran tactile
Boutons de
programme
Boutons fléchés
de navigation
Haut-parleur
Bouton Démarrer/Entrée Voyants d'état
Microphone
Boutons Suivant, Précédent,
Plus et Moins
Pointe de lecture
Contraste de l'écran
Luminosité
de l'écran
Voyants d'état de la pile Antenne RF
20 MobileView™ Tablet T750
Publication 2727-QS001D-MU-P
Commandes et voyants
MobileView Tablet comprend les commandes et les voyants suivants. Le manuel
utilisateur de MobileView™ Tablet T750, publication 2727-UM001B, donne des
informations détaillées sur l'utilisation des différents voyants et commandes.
Commande/Voyant Symbole Description
Voyants d'état de la pile : indiquent le niveau de charge de la
pile. Cinq voyants verts allumés indiquent une pile totalement
chargée.
Luminosité de l'écran : se règle en appuyant sur les boutons à
l'aide de la pointe de lecture.
Contraste de l'écran : se règle en appuyant sur les boutons à
l'aide de la pointe de lecture.
Met en route le terminal serveur client (configurable).
Met en route l'état de la liaison sans fil (configurable).
Met en route le clavier virtuel (configurable).
Met en route l'Explorateur Windows (configurable).
Flèches de navigation : servent à déplacer verticalement ou
horizontalement les informations affichées. Une pression
simultanée sur les boutons fléchés gauche et droit produit le
même effet qu'une pression sur la touche Échap du clavier d'un
ordinateur.
Bouton Démarrer/Entrée : si le MobileView Tablet T750 est
éteint, appuyez sur ce bouton pour le mettre en route ; ce bouton
sert aussi à entrer une sélection activée.
Témoins lumineux : de couleur verte, jaune ou rouge, ils sont
programmables et peuvent être utilisés pour avertir l'utilisateur
d'une situation particulière, comme par exemple le faible niveau
de charge de la pile.
Les boutons Suivant et Précédent : ils sont programmés pour
passer successivement d'une sélection à l'autre (configurables).
Les boutons Plus et Moins : fonctionnent d'une manière
similaire aux boutons du même nom d'un clavier de PC, selon le
contexte de l'application active en cours (configurable).
Table of contents
Languages:
