DT Research DT365CT Assembly instructions

DT365CT
ENGLISH
Mobile Tablet
BASIC OPERATION GUIDE
DT365CT
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of tablets —the
DT365. Featuring a slim yet robust enclosure, the two-pound DT365 with 8.4”
TFT display is powered by the Intel® Atom™ dual-core processor, offering opmal
combinaons of performance and power savings.
The DT365 is available with Microso® Windows® Embedded Standard 7, Windows® 7
Professional or Linux operang systems. Each soware operang system features web
browser, client/ server compung soware, media player, accessories, and applicaons
support.
PACKAGE CONTENTS
One DT365 with Internal Baery Pack, Handstrap and Grips•
Capacive Touch Stylus and Lanyard•
AC-DC Power Adapter with Power Cord•
Basic Operaon Guide•
Major opons, depending on configuraon:
Desktop Charging Cradle with DC-in Power Jack and Ethernet and USB Ports•
External Baery Pack and External Baery Charger Kit•
* If your DT365 contains MSR, RFID reader, barcode scanner or camera module, please refer to the
Tablet Modules Basic Operaon Guide for detailed operaon.
ENGLISH 8
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2013, DT Research, Inc. All Rights Reserved.
DT Research is a registered trademark of DT Research, Inc. BOG112213DT365ENG
Federal Communicaon Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucons, may cause
harmful interference to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this equipment does cause
harmful interference to radio or television recepon, which can be determined
by turning the equipment offand on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separaon between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which•
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
FCC Cauon: Any changes or modificaons not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in conjuncon
with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.

DT365CT
Buon Funcons
BUTTON ACTION
As SAS buon without the scanner module
As scanner trigger when equipped with the scanner module
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts tablet (soware dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
Input/ Output Ports
Magnec Stripe Reader (MSR)
USB Port
Microphone Jack
Headphone Jack
SD Slot
DC Power Input
The DT365
1
2
A
B
C
D
Baery/Power LED
Wireless LED
1
2
F
E
E
F
B
A
D
C
ENGLISH 23ENGLISH
Power/Baery LED Status:
Blue indicates the baery is 25% to 100% charged•
Blinking blue indicates the baery is charging•
Orange indicates that the baery is between 11% to 25%•
Blinking Orange indicates that the baery is below 10%•
Precauons
Always exercise care when operang and handling the DT365.
•
Do NOT apply excessive pressure to the display screen.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT365 should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
•
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe DT365 and disconnect all power sources. Report the
problem to your device provider immediately.
Never aempt to disassemble the
•DT365, as this will void the warranty.
THE DT365
Basic Features
The DT365 wireless tablet integrates a bright display, one USB port, and embedded
networking elements such as wireless LAN and Bluetooth or oponal 3G. The DT365 is
complemented by a suite of accessories, including baery expansion, charging cradles,
and baery charger kit, for a comprehensive user experience.
A DT365 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT365 does not come with
such a network adapter, please consult your device provider to establish the desired
network connecvity.

DT365CT
5ENGLISH
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed aer a launch sequence of several seconds. The wireless LAN connecon
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT365 may be configured using the ulies and methods dictated by the soware
operang system. The DT365 should be configurable for various properes such as user
profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT365 is oen delivered with an embedded (user-inaccessible) 802.11a/b/g/n WLAN
adapter equipped with a hidden custom antenna.
T
•hrough the support of typical WLAN adapters, the DT365 should be able to detect
all 802.11 access points in the vicinity for you to select the access point of your
choice for connecon.
T
•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT365 and the access
points have to match. The SSID is case-sensive and it is recommended that you
enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure access.
W
•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
R
•efer to the access point operang manuals for seng up the 802.11 access points.
ENGLISH 4
OPERATION
Internal Baery
Warning! !
The Internal baery pack should only be replaced by an authorized DT Research service
representave. Please contact your product and/or service provider for internal baery
replacement service.
Powering ON and OFF
To acvate the Tablet Modules basic, push and quickly release the Power Buon. The
display will come on in a few seconds. To put the DT365 in Standby mode, push and
quickly release the Power Buon. To turn the DT365 offfor extended storage, power off
safely using any soware funcon that “shuts down computer”provided in the soware
operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT365 when seng up for the first me to fully
charge the internal baery pack. You may charge the external baery pack with it
aached to the DT365, or with the oponal external baery charger kit.
NOTE:
When the baery pack(s) is (are) charging, the blue-colored Baery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
acvity and the LED stays dark, the baery pack(s) may have been drained
substanally. Try unplugging/ replugging the AC-DC adapter to the DT365 a few
mes to acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby”mode while not in use. Pushing briefly on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.

DT365CT
7ENGLISH
To Held the Tablet
Lehand: grip the leback side of the tablet
with your lehand four index fingers, with thumb
resng on the top of the back side of the tablet
and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index fingers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
ENGLISH 6
Bluetooth
The Bluetooth configuraon applicaon is enabled from the System Tray or from the
Windows Mobility Center. Follow the instrucons and opons provided within the appli-
caon to configure and invoke Bluetooth connecvity with the corresponding peripherals.
Desktop Cradle
The DT365 is complemented by an oponal Desktop Cradle for support, pass-through
charging, and connecon to a range of USB peripherals, including keyboard and mouse.
The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter, an Ethernet
port and USB ports. Always seat the DT365 securely onto the cradle. The cradle must be
powered by the AC-DC adapter for the Ethernet and USB ports to funcon. The baery
packs on the DT365 may be recharged by connecng the AC-DC adapter directly to the
DC-in port on the DT365 or through the DC-in port on the Desktop Cradle while the DT365
is docked to the Cradle.
USING THE Mobile Tablet
Peripherals Support
Through its USB port, the DT365 supports a wide range of USB-based peripherals. These
peripherals are applicable for soware installaon, applicaons storage, data storage,
and system soware recovery and updates. The DT365 is also compable with custom
mountable cradle opons. These securable and mountable cradles provide an interface to
VESA mounts and arms, and to ports that may include USB, Ethernet, and pass-through
power.
Remote Management
Depending on soware configuraon, the DT365 can be centrally managed for asset
monitoring and for soware control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
If the DT365 comes with a 3G module, please contact your product and/or service
provider for the SIM Card installaon procedures.