ABA Floss boss User manual

INSTRUCTIONS FOR THE COTTON CANDY MACHINE / Customer Pickup
Page 1 of 3 For Technical Support Call 480-874-3470
Unpack all pieces, place machine
on a short table if possible (a 2’ tall
table will be easier to use)
Unscrew both Aluminum Wheels all
the way down. Make sure both
switches are in the OFF Position
then plug in the machine.
Place the lower pan on top of the
machine and make sure the
netting and clips are securely in
place (The pan just sits on top of
the machine) on the 4 rubber
bumpers.
1.
Place the clear protector dome
on top of the pan.
2.
Fill the center of the machine with
the supplied sugar only. Never fill
the machine while it is spinning.
(Use caution when refilling as
spinner head is very hot and will
cause burns).

INSTRUCTIONS FOR THE COTTON CANDY MACHINE / Customer Pickup
Page 2 of 3 For Technical Support Call 480-874-3470
Do not overfill the spinner head
with sugar. You can change colors of
the sugar anytime without dumping
the existing sugar, just pour a
different color in the spinner head.
Turn on both switches and within a
minute the sugar should start to spin
out and stick to the netting.
After the pan has filled with sugar
proceed to the next step.
Set the Heat Level to about 3/4 as
shown. More heat may be needed
during cooler weather or when you
first start using the machine. As the
machine starts making cotton candy
you may need to reduce the heat.

INSTRUCTIONS FOR THE COTTON CANDY MACHINE / Customer Pickup
Page 3 of 3 For Technical Support Call 480-874-3470
Spin the paper cone clockwise
around the pan.
After the cone is full, place the
cotton candy in the bag and repeat
.step 9
Turn off switches to stop the
machine.
both
Enjoy!