ABC Design Classic Bouncer User manual

Classic Bouncer
- with toybar
- Backrest and legrest adjustable
- Swing and feeding position
- 3 point harness
- Weight: 3,6 kg
- EN 12790:2007 tested

Dear Customer,
Congratulations on the purchase of your ABC Design Bouncer. We are pleased that you have chosen one of our products
and hope that you will be completely satisfied with the service you receive from the product. We advise you to read the
Instruction Leaflet carefully before use of the pram and then to keep it in a safe place. If you fail to do this the safety of
your child can be jeopardised. Kindly pay attention to the washing and care instructions so that you can enjoy long and
trouble free use of your new purchase.
Your ABC-Design Team
Hints for Care and Use
Hints for Care and UseHints for Care and Use
Hints for Care and Use
1. The material which are used for manufacturing equals to AZO, EN 71-2 and EN 71-3 none fadeing values. However, we advise you
not to expose the product to the sun for a long time. Attrition and fading of colours during heavy solar radiation do not justify a
damage claim. The fabric case of your bouncer is washable. You can wash the case by hand or machine coldwash.
2. Each product frame is manufactured according to DIN standards. the moving components must be lubricated regularly to
maintain the safety of your product and if required rerivetted.
Look out: Please use only silicon-oil or silicon-spray for oiling.
3. Regular care and maintenance contribute to the safety and longevity of your bouncer. Always store the bouncer indoors.
Page 2

1. Set up the bouncer
1. Set up the bouncer1. Set up the bouncer
1. Set up the bouncer
Put the metal parts into the plastic fixation as shown on
picture.
Put the metal part into the plastic part until it snaps in.
Page 3

2. Function of bouncing and fixing
2. Function of bouncing and fixing2. Function of bouncing and fixing
2. Function of bouncing and fixing
Pull the two blue plastic parts back until it snaps in.
3. Fasten and unfasten the head protection
3. Fasten and unfasten the head protection3. Fasten and unfasten the head protection
3. Fasten and unfasten the head protection
To fasten the head protection you have to fix it with the
velcro on the backside of the bouncer, as shown on the
photo.
If you want to remove the head support, you have to remove
the velcro at the backside of the bouncer.
Page 4

4. Adjustment of the leg support
4. Adjustment of the leg support4. Adjustment of the leg support
4. Adjustment of the leg support
To adjust the leg support you have to pull the clip
mechanism up, as shown on the photo. Now you can adjust
the position. To fix it you have to clap the folding
mechanism down.
5. Adjusting the backrest
5. Adjusting the backrest5. Adjusting the backrest
5. Adjusting the backrest
To adjust the backrest you have to push the clip mechanism
up on both sides. Now you can adjust the position of the
backrest. To fix it you have to clip the folding mechanism
down.
Page 5

6
66
6. Function of the harness
. Function of the harness. Function of the harness
. Function of the harness
To fix the harness please put the two plastic parts together until
they lock.
Please adjust the harness that your child will keep in the
scheduled position.
To unlock the harness please push the two plastic part together
and then pull them apart as shown on the picture.
7
77
7. Fixing the play tray
. Fixing the play tray. Fixing the play tray
. Fixing the play tray
Put both ending parts of the play tray into the fixation at the
bouncer
W
WW
WARNIN
ARNINARNIN
ARNING
GG
G: Never pull up the Classic Bouncer with the play
Never pull up the Classic Bouncer with the playNever pull up the Classic Bouncer with the play
Never pull up the Classic Bouncer with the play
tray while your child is sitting inside
tray while your child is sitting insidetray while your child is sitting inside
tray while your child is sitting inside
Page 6

8
88
8. Folding the bouncer
. Folding the bouncer. Folding the bouncer
. Folding the bouncer
To fold the bouncer you have to push the silver button down
and pull the frame apart as shown on the photo.
Clip the plastic part into direction to the frame as shown on
the photo.
Now pull both sides of the frame into direction to the
backrest as shown on the photo.
Now the bouncer is folded.
Page 7

-
- Normal problems regarding to years of wear and damages through heavy uses is no reason for reclamation.
- Damages which are caused by wrong using of this product are no reason for reclamation.
- Damages through wrong installations are no reason for reclamation.
- Damages through wrong using of the bouncer are no reason for reclamation.
- Scratches are normal damages and are no reasons for reclamation.
- Damp textile parts, which can’t be dried or mouldy parts, are no reason for reclamation.
- Through sun intensity, sweat, cleansing agent, rub-downs or often washings, the fabric colour can fade out
ddand this is also no reason for a reclamation.
WARNING
WARNINGWARNING
WARNING: Never leave your baby unsupervised in the bouncer.
- WARNING
WARNINGWARNING
WARNING: Please make sure that all locks are closed before using.
- This bouncer is suitable for one baby.
- WARNING
WARNINGWARNING
WARNING: It is dangerous to place the bouncer on raised areas.
- WARNING
WARNINGWARNING
WARNING: Keep away from fire
- WARNING:
WARNING:WARNING:
WARNING: You are not allowed to carry out a bouncer using the toy bar or carry handle while the
child is inside
-
--
- WARNING
WARNINGWARNING
WARNING: This bouncer is not suitable for children, who are able to sit by their own. (appr. 9 months; to 9 kg)
- WARNING
WARNINGWARNING
WARNING: Please always use the seat belt.
Please read this instruction carefully before using the Classic Bouncer. If you don’t pay attention to these
++iinstructions, the safety of your baby can be in danger.
ABC Design GmbH
Dr. Rudolf-Eberle-Str. 29
D-79774 Albbruck