Access VITAL User manual

VITAL Installation and User Manual
Revised: October 28, 2020

2VITAL Installation and User Guide
TABLE OF CONTENTS
QUICK START .......................................................................................................................... 3
ABOUT VITAL: A Wireless Asset Tracker........................................................................... 3
FEATURES............................................................................................................................ 3
FUNCTIONAL SPECIFICATIONS............................................................................................. 3
INSTALLATION......................................................................................................................... 5
CONFIGURATION................................................................................................................. 6
INPUT VERIFICATION .......................................................................................................... 6
ENTER HOUR METERS........................................................................................................ 6
CHECK CONNECTIVITY....................................................................................................... 7
HOW TO ENTER SSID AND PASSWORDS (only for Wi-Fi units)......................................... 7
FINAL VERIFICATION........................................................................................................... 7
SUPPORT ................................................................................................................................. 8

3VITAL Installation and User Guide
QUICK START
ABOUT VITAL: A Wireless Asset Tracker
A versatile, robust, and affordable wireless hour meter reader that does much more than
simply record equipment run time. Locate your fleet through GPS tracking, receive
notifications when equipment issues arise, and schedule maintenance requests from
any location.
FEATURES
•Productivity Measurement
Tracking
•Automatic Engine Shut Off
•Wi-Fi or Cell Connectivity
•GPS Tracking
•Up to 4 Hour Meters
•Easy & Quick Installation
DISPLAY
SCREEN
NUMERIC
KEYPAD
MENU
BUTTON
ARROW
KEYS
OK
BUTTON

4VITAL Installation and User Guide
FUNCTIONAL SPECIFICATIONS
VITAL is a versatile solution to track any powered asset. Each input can be customized
based on the asset being monitored so reports can provide data in the context of how
the asset is maintained.
Electrical
Voltage Input
12-80 VDC
Current
50 mA (Typical) 150 mA (Peak)
Communication
Wi-Fi (WPA2 - PSK) Cellular (GSM, 3G/2G)
Location Tracking
GPS, Cell Assist
Inputs
4 (12-80 VDC)
Active High or Low (Programmable)
Output
Relay, NO (Optional)
Mechanical and Environmental
Dimensions
5 X 3 X 1.25 (in inches)
Mounting
#10 or M4 Screws (2) - Included
Temperature
Operating: -20 - 70 Deg C
Storage: -20 - 80 Deg C
Humidity
97%, Non-condensing
Sealing
IP65

5VITAL Installation and User Guide
INSTALLATION
CONNECTION DIAGRAM
Pin
Input
Function
Color
Bag Tug,
Push Backs,
Hi-Speeds*
Belt
Loader*
De-Icers,
Towbarless*
Others
where
productive
inputs are
not available
1
DC, IN
RED
BATT +
BATT +
BATT +
BATT +
2
Key
GREEN
IGNITION
IGNITION
IGNITION/
FRONT &
REAR ENGINE
(May need a
Diode
Assembly)
IGNITION
3
Seat
BLUE
SEAT OR
IGNITION
SEAT OR
IGNITION
FRONT
ENGINE
SEAT OR
IGNITION
4
Travel**
WHITE
TRACTION
OR
NEUTRAL
BELT
(May need a
Diode
Assembly)
CRADLE OR
NEUTRAL
N/C
5
Aux**
BROWN
N/C
N/C
REAR ENGINE
N/C
6
DC, GND
BLACK
BATT -
BATT -
BATT -
BATT -
* Typical GSE installation, may differ per application.
**If access to these inputs is not feasible, please order non-invasive current sensor part no. HACC-CS.

6VITAL Installation and User Guide
CONFIGURATION
INPUT VERIFICATION
ENTER HOUR METERS
Step 1: Press the “MENU” button (gear icon).
Step 2: Enter password given and then press “OK”
(check mark icon).
Step 3: Use the arrow keys to navigate to the “Input
Status” option on the screen.
Step 4: Toggle input indicated on display. Based on the
state of the input, it should say either “ON” or “OFF”.
Step 5: Check the next input using the arrow keys.
Note: If Inputs are sensed backwards, change its logic
from Active High to Active Low or vice versa in “Input
Settings”.
Step 1: Install device as per the connection diagram (on
page 5).
Step 2: Ensure device is powered up by removing top
cover. Display should say “System OK”.
Step 1: Using the arrow keys navigate to the “Hour
Meters” option.
Step 2: Press “OK” to edit the reading.
Step 3: Enter the new reading and press “OK”.
Step 4: Edit the next input using arrow keys.

7VITAL Installation and User Guide
CHECK CONNECTIVITY
HOW TO ENTER SSID AND PASSWORDS (only for Wi-Fi units)
FINAL VERIFICATION
Step 1: Ensure the device is in range with a gateway.
Step 2: While in Menu, navigate to “Connectivity”.
Step 3: Press “OK”.
Step 4: Wait a few seconds. If connectivity is successful, it
should say “Connectivity OK”.
Step 1: Using the arrow keys navigate to the “Network” option.
Step 2: Press “OK”.
Step 3: Enter the SSID number and press “OK”.
Step 4: Enter the password and press “OK”.
Step 5: Next, using the arrow keys navigate to the “Security”
option.
Step 6: Select “WPA-2 Personal” and press “OK”.
Step 1: Log in to the unit with the keypad.
Step 2: While in Menu, navigate to “Connectivity”.
Step 3: Press “OK”.
Step 4: Wait a few seconds. If connectivity is successful, it
should say “Connectivity OK”.
Step 5: Make sure to check for the network bars, if the bars
appear on the top of the screen then the device is
communicating to AssetPro 360.

SUPPORT
Phone
908-789-8700
Email
For orders: orde[email protected]
For support: [email protected]
Website
theaccessway.com/contact-us