Accu-Chek FastClix User manual

Accu-Chek Guide makes things much easier.
Testing for blood glucose
Removing the test strip
Push a test strip upwards with slight pressure from the
front or back. With this test strip you can also touch the
upper side.
1
Inserting a test strip
Insert the test strip into the test strip slot in the
direction of the arrow. If you switch on the device
beforehand, you will automatically activate illumination.
2
Applying blood
Touch the drop of blood with the yellow edge of the test
strip and wait until the "Measurement in progress"
message appears.
Ejecting the test strip
Remove the test strip by activating the test strip ejector
button or by pulling the test strip out.
34
For further instructions on handling
please watch the product video at
www.accu-chek.de/guide or read the
package insert.
Buttons for menu
navigation
Test strip ejector
button
Test strip slot
ON/OFF
button
Englisch

ACCU-CHEK, ACCU-CHEK GUIDE and FASTCLIX are Roche trademarks.
© 2018 Roche Diabetes Care. All rights reserved.
Accu-Chek FastClix. Obtain blood with just 1 click.
Preparation
Insert lancet drum
Obtaining blood
Just 1 click!
Next step
Preparing and removing the lancet drum
Rotate the cap until the marking shows the
desired penetration depth.
. Remove
cap
. Insert
drum
. Replace
cap . First turn lever down-
wards to stop, then back
in upwards direction.
Attention: do not remove the lancet drum until all the
lancets have been used. Once removed, the drum
cannot be reinserted for hygienic reasons.
. For removal, pull off cap
and pull out the drum.
Press release button down completely to take a
blood sample.
www.accu-chek.de
Roche Diabetes Care Deutschland GmbH
Sandhofer Straße 116
68305 Mannheim
You would like to know more?
Our staff at the Accu-Chek Customer Service Center are at your service!
Toll-free number   (Mon–Fri, :–: hrs).
Or visit us online at www.accu-chek.de
Unused drum Used drum
Click!
Click!
Only 1 click
for priming and
triggering