Accu-Steam EG24A Administrator Guide
AccuTemp Products, Inc. · 8415 North Clinton Park · Fort Wayne, IN 46825 ·800 210-5907 · accutemp.net
MP5018-1702
INSTALLATION/OPERATORS MANUAL
ACCU-STEAM ELECTRIC G2 GRIDDLE
Improper installation, alteration,
adjustment,service, cleaning or
maintenance of this commercial appliance
could result in property damage, serious
injury or death.
Read and understand the installation,
operational, maintenance instructions
before installing, servicing, or operating this
commercial appliance.
Serial Number:
Model:
Install Date:
WARNING
Record the serial number, model number and
the install date. (identication decal located on
the left side of the front panel ) Please have this
information when calling for assistance.
NOTE
MODELS
EG24A
EG36A
EG48A
EG24B
EG36B
EG48B
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 1
DESCRIPTION PAGE
Document History 1
Safety Warnings 2-3
Limited Warranty Policy - US & Canada 4
Limited Warranty Policy - International 5
Specication Sheets 6-11
Warranty Registration Instructions 12
Installation/Operational Checklist & Warranty Registration Form 13-14
Installation Instructions 15-17
Operation Instructions 18-29
Cleaning Instructions 30-31
Planned Maintenance 32-33
Basic Service & Troubleshooting 34-36
Schematics 37-41
Important Contact Information 42
Notes 43
TABLE OF CONTENTS
DOCUMENT HISTORY
Current Revision Date Prior Revision Date
MP5018-1702 02/02/2017 MP5018-1605 05/12/2016
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 2
SAFETY WARNINGS
SYMBOL DEFINITIONS
Symbols are used to attract your attention to possible dangers. They are only effective if the
operator uses proper accident prevention measures. Some of the symbols are boxed text, while
other maybe just picture icons. Please give this information the respect they deserve for safe
operation.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury.
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
DANGER
CAUTION
WARNING
Earth Ground
Dangerous Voltage
ALERT - Noties the reader of an important message/warning,
usually a safety related message.
INFORMATION - Noties the reader of important information that
may or may not be safety related.
Caution Hot Surface
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 3
Plug this appliance into a properly grounded
electrical outlet of the correct voltage, size
and plug conguration. If they do not match,
contact a qualied electrician to determine
the proper voltage and size and install the
proper electrical outlet.
To avoid any personal injury or damage to
the unit do not pull this appliance by the
power cord.
To prevent any injury, discontinue any use if
power cord is frayed or worn.
To prevent any injury or damage this
appliance must be installed by a qualied
electrician.
To avoid any injury, turn the power off, unplug
from the power source and allow to cool
before performing any maintenance.
To avoid electrical shock or personal injury,
do not steam clean or use excessive water
on or pressure washer on this appliance.
This product has no “user” serviceable parts.
To avoid injury or damage to this appliance use
only Authorized AccuTemp Service Agents
and Genuine AccuTemp Replacement Parts
when service is required.
Genuine AccuTemp Replacement Parts
are specied to operate safely in the
environments in which they are used. Some
aftermarket parts or generic replacements
parts do not have the same specications to
operate safely in AccuTemp equipment. It is
imperative that to use Genuine AccuTemp
Replacement Parts to avoid injury or damage
to this appliance.
Always disconnect from power source before
cleaning or servicing.
Any ineld modication that bypasses the
built-in safety features will result in personal
injury or death.
This appliance must be properly grounded,
in accordance with all National, state or local
electrical codes.
This appliance has a totally unique design
and is constructed unlike any other griddle
on the market today. Any modication may
permanently damage the griddle.
Do not place any cooking utensils into the
openings of this appliance as there is the
possibility of personal injury or death.
This appliance must be level for proper
operation and to reduce possible damage .
This appliance is heavy, for safe handling,
the installer should obtain help as needed
or employ appropriate material handling
equipment to remove the appliance from
the skid and move to the nal location in the
building.
Temperatures in and around the appliance
are very hot and can cause severe burns.
To avoid damage to the cooking surface of
this appliance do not use abrasive cleaners
such as a griddle stone or brick.
To avoid damage to the do not leave a
chlorine sanitizer in contact with the stainless
steel longer than 10 minutes.
To avoid severe burns slowly remove
the grease reservoir to avoid spilling the
contents. It is recommended to let it cool
before removing.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the following safety installation to avoid personal injury or death and to avoid
damage to the equipment or property
WARNINGS
CAUTIONS
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 4
LIMITED WARRANTY
One Year Labor and Parts
AccuTemp Products, Inc. ( AccuTemp ) warrants that your AccuTemp equipment will be free of defects in
material and workmanship under normal use for a period of twelve (12) months from installation or fteen (15)
months from date of shipment from AccuTemp, whichever date rst occurs (the Warranty Period ). Registration
of AccuTemp equipment is required at time
of installation.
Damage to AccuTemp equipment that occurs during shipment must be reported to the carrier, and is not
covered under this warranty. The reporting of any damage during shipment is the sole responsibility of the
commercial purchaser/user of such AccuTemp equipment.
AccuTemp provides an active service department, which should be contacted and advised of service issues
regardless of warranty period.
During the warranty period, AccuTemp agrees to repair or replace, at its option, F.O.B. factory, any part which
proves to be defective due to defects in material or workmanship, provided the equipment has not been altered
in any way and has been properly installed, maintained, and operated in accordance with the instructions in the
AccuTemp Owners Manual.
During the warranty period, AccuTemp also agrees to pay for any factory authorized equipment service agency
(within the continental United States and Canada) for reasonable labor required to repair or replace, at our
option, F.O.B. factory, any part which proves to be defective due to defects in materials or workmanship,
provided the service agency has received advance approval from AccuTemp factory service to perform the
repair or replacement. This warranty includes travel time not to exceed two hours and mileage not to exceed
50 miles (100 miles round trip), but does not include post start-up assistance or training, tightening of loose
ttings or external electrical connections, minor adjustments, gaskets, maintenance, or cleaning. AccuTemp will
not reimburse the expense of labor required to replace parts after the expiration of the warranty period.
Proper installation is the responsibility of the dealer, owner-user, or installing contractor and is not covered
by this warranty. While AccuTemp products are built to comply with applicable standards for manufacturers,
including Underwriters Laboratories (UL) and National Sanitation Foundation (NSF), it is the responsibility of
the owner and the installer to comply with any applicable local codes that may exist.
AccuTemp makes no other warranties or guarantees, whether expressed or implied, including any warranties
of performance, merchantability, or tness for any particular purpose. AccuTemp s liability on any claim of any
kind, including negligence, with respect to the goods and services covered hereunder, shall in no case exceed
the price of the goods and services, or parts thereof, which gives rise to the claim. In no event shall AccuTemp
be liable for special, incidental, or consequential damages, or damages in the nature of penalties.
This constitutes the entire warranty, which supersedes and excludes all other warranties, whether written, oral,
or implied.
Product Warranty
IMPORTANT
Improper installation can affect your warranty. Installation is the responsibility of the Dealer, Owner/
User or the Installation Contractor. See: Section One, Installation of the Owner s Manual.
U.S. & Canada Sales Only
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 5
ACCUTEMP LIMITED WARRANTY
One Year Parts Only
AccuTemp Products, Inc. (AccuTemp) warrants that all the components of the AccuTemp equipment will be free
of defects in material and workmanship under normal use for a period of one year from date of installation and
fteen months from date of shipment from AccuTemp. Registration of AccuTemp equipment is required at the
time of installation.
Damage to AccuTemp equipment that occurs during shipment must be reported to the carrier, and is not
covered under this warranty. The reporting of any damage during shipment is the sole responsibility of the
commercial purchaser/user of such AccuTemp equipment.
AccuTemp provides an active service department, which should be contacted and advised of service issues,
regardless of the warranty period. During the warranty period, AccuTemp agrees to repair or replace, at
its option, F.O.B. factory, any part which proves to be defective due to defects in material or workmanship,
provided the equipment has not been altered in any way and has been properly installed, maintained, and
operated in accordance with the instructions in the AccuTemp Installation/Operator’s Manual. Exception: All
gaskets are covered for a period of 90 days from installation of the equipment or 180 days from shipment if it is
a manufacturing defect.
Proper installation is the responsibility of the dealer, owner-user, or installing contractor and is not covered
by this warranty. Improper installation can affect your warranty. Installation is the responsibility of the Dealer,
Owner/User or the Installation Contractor. While AccuTemp products are built to comply with applicable
standards for manufacturers, including Underwriters Laboratories (UL) and Underwriters Laboratories
Sanitation requirements, it is the responsibility of the owner and the installer to comply with any applicable local
codes that may exist.
AccuTemp makes no other warranties or guarantees, whether expressed or implied, including any warranties
of performance, merchantability, or tness for any particular purpose. AccuTemp liability on any claim of any
kind, including negligence, with respect to the goods and services covered hereunder, shall in no case exceed
the price of the goods and services, or parts thereof, which gives rise to the claim. In no event shall AccuTemp
be liable for special, incidental, or consequential damages, or damages in the nature of penalties.
This constitutes the entire warranty, which supersedes and excludes all other warranties, whether written, oral,
or implied.
Product Warranty
IMPORTANT
Improper installation can affect your warranty. Installation is the responsibility of the Dealer, Owner/
User or the Installation Contractor. See: Section One, Installation of the Owner s Manual.
INTERNATIONAL WARRANTY
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 6
Short Specification
Griddle shall be an Energy Star compliant
gas-heated unit, with a hermetically
sealed vacuum chamber that produces
steam that heats the 7-gauge stainless
steel griddle plate. Efficient steam heat
transfer provides 200–400°F (93–204°C)
operating temperature range and uniform
griddle surface temperatures of ±5°F
(±3°C). Griddle fabricated from cold-rolled
stainless steel with 4” high back splash,
sides that taper from 4” to 1 5/16”, a 3 7/8”
wide by ½” deep full front grease trough
and 1 ¼ - 1 5/8 gallon grease drawer. Unit
to be UL listed, UL EPH Sanitation Certified
(NSF/ANSI 4) and manufactured in the
USA.
Construction Features
• Cold-rolled and annealed stainless steel
griddle plate with polished stainless
steel body
• 7 gauge griddle plate with 4” high rear
splash and 4” to 1 5/16” tapered side
walls
• 3 7/8” wide by ½” deep full front grease
trough
• 2” x 4” drop chute to 1.25 [24”], 1.6 [36”,
48”] gallon capacity grease pan
• 4” legs with bullet feet
• Control guard
Performance Features
• Hermetically-sealed steam chamber
heats griddle plate
• 9.6-kW [24”] or 14.25-kW [36”, 48”]
total power, long-life low watt density
heating elements mounted inside
vacuum chamber and immersed in
chemically pure water (Water never
needs replacement)
• Steam transfers heat evenly to entire
cooking surface with only ±5°F (±3°C) in
temperature variation
• Rapid surface temperature recovery [10
seconds or less] allows turning product
to same spot
• Smooth cold-rolled stainless steel
griddle surface speeds and simplifies
cleaning
Standard Control Features
• Heating indicator light
• 200–400°F (93–204°C) digital thermostat
• Easy front service access to controls
• Control guard
• 3 preset temperatures available
• Instant surface temperature readout
• Manager mode to lock out temperature
controls
• Over temperature indicator light
Cooking Capacity & Applications
Effective Cooking Area
Griddle Applications include:
• Pancakes, Eggs, Sausage, French Toast
• Burgers, Grilled Onions, Toasted Buns
• Grilled Cheese, Sandwiches
• Fried Potatoes, Fish, Chicken Breasts,
Philly Steaks, Liver and MORE
Environmental Approvals &
Programs
Other Approvals
Options & Accessories
• “U” Channel for connecting 2 griddles
• Front mounted prep shelf—8” wide
stainless steel
• Condiment Board
• Maritime Package (call for details)
• Correction Package (call for details)
• Chain Package (call for details)
• Heavy duty stainless steel stand with
bottom shelf and 5” casters
Accu-SteAm™ Griddle eG SerieS
Electric/Steam-Heated,
Tabletop Griddle
MM5206-1605
Project: ___________________________________ Location: ___________________________________ Item #:
___________________________________ Quantity:___________
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
EGF-A36 Accu-Steam™
Tabletop Griddle shown
Depth 24” Wide 36” Wide 48” Wide
30” 717 sq. in 1077 sq. in. 1437 sq. in.
24” 574 sq. in. 862 sq. in. 1150 sq. in.
NSF/ANSI 4
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 7
MM5206-1605
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
Accu-Steam Griddle Specifications (replace **** with voltage & phase, i.e. 2083)
Model # EGF****A2400-T1 EGF****B2400-T1 EGF****A3600-T1 EGF****B3600-T1 EGF****A4800-T1 EGF****B4800-T1
KW Input 9.6 kW 9.6 kW 14.25 kW 14.25 kW 14.25 kW 14.25 kW
208/3 Amp Load 27 27 40 40 40 40
240/1 Amp Load 40 40 n/a n/a n/a n/a
240/3 Amp Load 24 24 35 35 35 35
440/3 Amp Load 15 15 21 21 21 21
480/3 Amp Load 16 16 23 23 23 23
Unit Width (A) 24.25 [616] 24.25 [616] 36.25 [921] 36.25 [921] 48.25 [1226] 48.25 [1226]
Unit Depth (D) 34.7 [881] 28.7 [729] 34.7 [881] 28.7 [729] 34.7 [881] 28.7 [729]
Cooking Surface Width (B) 23.9 [607] 23.9 [607] 35.9 [912] 35.9 [912] 47.9 [1217] 47.9 [1217]
Cooking Surface Depth (C) 30 [762] 24 [610] 30 [762] 24 [610] 30 [762] 24 [610]
Depth to Rear Leg (E) 8.5 [216] 2.5 [64] 8.5 [216] 2.5 [64] 8.5 [216] 2.5 [64]
Center right to left (F) 20 [508] 20 [508] 32 [813] 32 [813] 44 [1117] 44 [1117]
Effective Cooking Area 717 sq. in. 574 sq. in. 1077 sq. in. 862 sq. in. 1437 sq. in. 1150 sq. in.
Grease Pan Capacity 1.25 gal 1.25 gal 1.6 gal 1.6 gal 1.6 gal 1.6 gal
NEMA Plug (208/240) 15-50P 15-50P 15-50P 15-50P 15-50P 15-50P
NEMA Plug (440/480) L16-20P L16-20P L16-30P L16-30P L16-30P L16-30P
Accu-SteAm™ Griddle eG SerieS
Electric/Steam-Heated,
Tabletop Griddle
Notes:
1.) Dimensions in brackets [ ] are metric.
2.) 5’ power cord wtih plug provided.
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 8
Short Specification
Griddle shall be an Energy Star compliant
gas-heated unit, with a hermetically
sealed vacuum chamber that produces
steam that heats the 7-gauge stainless
steel griddle plate. Efficient steam heat
transfer provides 200–400°F (93–204°C)
operating temperature range and uniform
griddle surface temperatures of ±5°F
(±3°C). Griddle fabricated from cold-rolled
stainless steel with 4” high back splash,
sides that taper from 4” to 1 5/16”, a 3 7/8”
wide by ½” deep full front grease trough
and 1 ¼ - 1 5/8 gallon grease drawer. Unit
to be UL listed, UL EPH Sanitation Certified
(NSF/ANSI 4) and manufactured in the
USA.
Construction Features
• Cold-rolled and annealed stainless steel
griddle plate with polished stainless
steel body
• 7 gauge griddle plate with 4” high rear
splash and 4” to 1 5/16” tapered side
walls
• 3 7/8” wide by ½” deep full front grease
trough
• 2” x 4” drop chute to 1.25 [24”], 1.6 [36”,
48”] gallon capacity grease pan
• 4” legs with bullet feet
• Control guard
Performance Features
• Hermetically-sealed steam chamber
heats griddle plate
• 9.6-kW [24”] or 14.25-kW [36”, 48”]
total power, long-life low watt density
heating elements mounted inside
vacuum chamber and immersed in
chemically pure water (Water never
needs replacement)
• Steam transfers heat evenly to entire
cooking surface with only ±5°F (±3°C) in
temperature variation
• Rapid surface temperature recovery [10
seconds or less] allows turning product
to same spot
• Smooth cold-rolled stainless steel griddle
surface speeds and simplifies cleaning
Standard Control Features
• Heating indicator light
• 200–400°F (93–204°C) digital thermostat
• Easy front service access to controls
• Control guard
• 3 preset temperatures available
• Instant surface temperature readout
• Manager mode to lock out temperature
controls
• Over temperature indicator light
Cooking Capacity & Applications
Effective Cooking Area
Griddle Applications include:
• Pancakes, Eggs, Sausage, French Toast
• Burgers, Grilled Onions, Toasted Buns
• Grilled Cheese, Sandwiches
• Fried Potatoes, Fish, Chicken Breasts,
Philly Steaks, Liver and MORE
Environmental Approvals &
Programs
Other Approvals
Options & Accessories
• “U” Channel for connecting 2 griddles
• Front mounted prep shelf—8” wide
stainless steel
• Condiment Board
• Maritime Package (call for details)
• Correction Package (call for details)
• Chain Package (call for details)
• Heavy duty stainless steel stand with
bottom shelf and 5” casters
Accu-SteAm™ Griddle eG SerieS
Electric/Steam-Heated,
Stand-Mounted Griddle
MM5205-1605
Project: ___________________________________ Location: ___________________________________ Item #:
___________________________________ Quantity:___________
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
EGF-A36 Accu-Steam™
Stand-Mounted Griddle
(also available with bullet
or flanged feet)
NSF/ANSI 4
Depth 24” Wide 36” Wide 48” Wide
30” 717 sq. in 1077 sq. in. 1437 sq. in.
24” 574 sq. in. 862 sq. in. 1150 sq. in.
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 9
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
Accu-Steam Griddle Specifications (replace **** with voltage & phase, i.e. 2083)
Model # EGF****A2400-S2 EGF****B2400-S2 EGF****A3600-S2 EGF****B3600-S2 EGF****A4800-S2 EGF****B4800-S2
KW Input 9.6 kW 9.6 kW 14.25 kW 14.25 kW 14.25 kW 14.25 kW
208/3 Amp Load 27 27 40 40 40 40
240/1 Amp Load 40 40 n/a n/a n/a n/a
240/3 Amp Load 24 24 35 35 35 35
440/3 Amp Load 15 15 21 21 21 21
480/3 Amp Load 16 16 23 23 23 23
Unit Width (A) 24.25 [616] 24.25 [616] 36.25 [921] 36.25 [921] 48.25 [1226] 48.25 [1226]
Unit Depth (D) 34.7 [881] 28.7 [729] 34.7 [881] 28.7 [729] 34.7 [881] 28.7 [729]
Cooking Surface Width (B) 23.9 [607] 23.9 [607] 35.9 [912] 35.9 [912] 47.9 [1217] 47.9 [1217]
Cooking Surface Depth (C) 30 [762] 24 [610] 30 [762] 24 [610] 30 [762] 24 [610]
Depth to Rear Leg (E) 8.5 [216] 2.5 [64] 8.5 [216] 2.5 [64] 8.5 [216] 2.5 [64]
Center right to left (F) 20 [508] 20 [508] 32 [813] 32 [813] 44 [1117] 44 [1117]
Effective Cooking Area 717 sq. in. 574 sq. in. 1077 sq. in. 862 sq. in. 1437 sq. in. 1150 sq. in.
Grease Pan Capacity 1.25 gal 1.25 gal 1.6 gal 1.6 gal 1.6 gal 1.6 gal
NEMA Plug (208/240) 15-50P 15-50P 15-50P 15-50P 15-50P 15-50P
NEMA Plug (440/480) L16-20P L16-20P L16-30P L16-30P L16-30P L16-30P
Accu-SteAm™ Griddle eG SerieS
Electric/Steam-Heated,
Stand-Mounted Griddle
Notes:
1.) Dimensions in brackets [ ] are metric.
2.) 5’ power cord with plug provided.
MM5205-1605
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 10
Short Specification
Griddle shall be an Energy Star compliant
electric-heated unit, with a hermetically
sealed chamber that produces steam
that heats the 7-gauge stainless steel
griddle plate. Efficient steam heat transfer
provides 200–400°F (93–204°C) operating
temperature range and uniform griddle
surface temperatures of ±5°F (±3°C).
Griddle fabricated from cold-rolled
stainless steel with 4” high back splash,
sides that taper from 4” to 1 5/16”, a 3 7/8”
wide by ½” deep full front grease trough
and 6 1/2 quarts grease drawer. Unit to be
UL listed, UL EPH Sanitation Certified
(NSF/ANSI 4) and manufactured in the
USA.
Construction Features
• Cold-rolled and annealed stainless steel
griddle plate with polished stainless
steel body
• 7 gauge griddle plate with 4” high rear
splash and 4” to 1 5/16” tapered side
walls
• 3 7/8” wide by ½” deep full front grease
trough
• 1 1/2” X 3” drop chute to 6 1/2 [36”, 48”]
quarts capacity grease pan
• 3” legs with bullet feet
• Control guard
Performance Features
• Hermetically-sealed steam chamber
heats griddle plate
• 14.25-kW [36”, 48”] total power, long-
life low watt density heating elements
mounted inside chamber and immersed
in chemically pure water (Water never
needs replacement)
• Steam transfers heat evenly to entire
cooking surface with only ±5°F (±3°C) in
temperature variation
• Rapid surface temperature recovery
allows turning product to same spot
• Smooth cold-rolled stainless steel
griddle surface speeds and simplifies
cleaning
Standard Control Features
• Heating indicator light
• 200–400°F (93–204°C) digital thermostat
• Easy front service access to controls
• Control guard
• 3 preset temperatures capable
• Manager mode to lock out temperature
controls
• Over temperature indicator light
Cooking Capacity & Applications
Effective Cooking Area
Griddle Applications include:
• Pancakes, Eggs, Sausage, French Toast
• Burgers, Grilled Onions, Toasted Buns
• Grilled Cheese, Sandwiches
• Fried Potatoes, Fish, Chicken Breasts,
Philly Steaks, Liver and MORE
Environmental Approvals &
Programs
Other Approvals
Options & Accessories
• “U” Channel for connecting 2 griddles
• Front mounted prep shelf—8” wide
stainless steel
• Condiment Board
• Maritime Package (call for details)
• Correction Package (call for details)
• Chain Package (call for details)
• Heavy duty stainless steel stand with
bottom shelf and 5” casters
Accu-SteAm™ Griddle eG SerieS
Electric/Steam-Heated,
Tabletop Griddle
Project: ___________________________________ Location: ___________________________________ Item #: ___________________________________ Quantity:___________
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
EGH-B48ET Accu-Steam™
Tabletop Griddle shown
Depth 36” Wide 48” Wide
24” 862 sq. in. 1150 sq. in.
NSF/ANSI 4
MM5228-1702
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 11
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
Accu-Steam Griddle Specifications
Model # EGH3803B36ET-T1 EGH3803B48ET-T1
KW Input 11.9 kW 11.9 kW
380/3 Amp Load 18 18
Unit Width (A) 36.25 [921] 48.25 [1226]
Unit Depth (D) 28.7 [729] 28.7 [729]
Cooking Surface Width (B) 35.9 [912] 47.9 [1217]
Cooking Surface Depth (C) 24 [610] 24 [610]
Depth to Rear Leg (E) 2.5 [64] 2.5 [64]
Center right to left (F) 32 [813] 44 [1117]
Effective Cooking Area 862 sq. in. 1150 sq. in.
Grease Pan Capacity 6 1/2 qts. 6 1/2 qts.
IEC Plug 2P 3W IP44 2P 3W IP44
Accu-SteAm™ Griddle eG SerieS
Electric/Steam-Heated,
Tabletop Griddle
Notes:
1.) Dimensions in brackets [ ] are metric.
2.) 5’ power cord wtih plug provided.
MM5228-1702
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 12
To register this AccuTemp product for warranty complete the following items:
1. Complete the Installation/Operational Checklist and Warranty Registration Form enclosed in the
document packet that was sent with the appliance.
2. Mail, fax or scan and send via e-mail the form to AccuTemp Products, Inc to the contacts listed for
each type on the form.
If you have any questions about warranty registration please contact our technical service group.
They are available 7 days a week from 7:00 am to 7:00 PM EST.
Toll Free 800 480-0415
Ofce 260 469-3040
Fax 260 469-3045
Email-Parts [email protected]
Web Site www.accutemp.net
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 13
PAGE 1
MP5020-1612
ELECTRIC - ACCU-STEAM™
Installation/Operational Checklist & Warranty
Registration Form
Store/Location:
Address:
City:
State: Zip:
Phone Number:
Fax Number:
Email:
Model #
Serial #
Name of Service/Installer Company:
Technician:
Phone Number:
** AccuTemp Products, Inc. is not responsible for the installation and/or modifications to the electrical supply source. **
Failure to accuratelycompleteandprovide this Installation/Operational Checklist&Warranty
Registration Formto AccuTemp Products may delay or void future Warranty Service Calls.
Check-Off List
General:
Electrical Connection :
Yes No
Yes No
Yes No
Yes No
Yes No
AMPS
Yes No
NEMA 15-50P
208/240VAC (All Models)
NEMA L16-20P
440/480VAC (24” Model)
NEMA L16-30P
440/480VAC (24” Model)
IEC 60309 IP44
380 VAC (5 wire 4 Pole)
Is the electrical wall receptacle positioned in a low heat-zone?
Note:
It is recommended that the wall receptacle be
placed as low asState& Local codes allow.Placement in high heat-zones could cause damageto the electrical cord or plug
thatwouldnotbecoveredundertheproductwarranty.
Is the griddle level, both side-to-side and front-to-back?
If this is a table-top installation, have the (4) rubber foot tip/boots been installed?
Isthe Supply Power Cordbeingpluggedinto a
wall outlet?
Yes No
Is the Supply Power Cord being hard-
wired, withouttheplug, to abreaker
Is the Supply Power Cord properly connected to GND?
What is the Electrical Breaker Amperage that will interrupt the Supply Voltage to the electric griddle?
Is the correct Plug and Receptacle being used on the Supply Power Cord?
Type of Plug?
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 14
PAGE 2
MP5020-1612
ELECTRIC - ACCU-STEAM™
Installation/Operational Checklist &
Warranty Registration Form
Supply Power Electrical Readings:
Temperature & Operational Verification:
°F
Yes No
Yes No
Yes No
Yes No
I accept and submit this Installation/Operational Checklist & Warranty Registration Form as complete and accurate:
Restaurant/Facility Manager Approval:
Signature
Printed Name
Date:
Mail Fax Email
AccuTemp Products, Inc
Attn: Warranty Administration
8415 North Clinton Park Dr.
Fort Wayne, IN 46825
Attn: Warranty Administration
260 469-3045
Attn: Warranty Administration
service@accutemp.net
Phase?:
Single Ø
Three Ø
Measured Supply Voltage?:
208VAC
240VAC
440VAC
480VAC
380VAC
Single Ø Measured Amps
L1
L2
Three Ø Measured Amps
L1
L2
L3
What is the customer's normal operating Thermostat temperature for the Griddle?
Note: DO NOT use an infrared or flat-top mechanical mercury thermometer.
Using a weighted contact temperature probe with digital thermometer, does the surface temperature (°F)
match the normal operating temperature (°F) set on the Thermostat?
Note: If the operating temperature is 250°F, then set the digital thermostat to 300°F and verify surface temperature. If the
operating temperature is 400°F, then set digital thermostat to 400°F and verify surface temperature does not exceed 396° F
on the high side of the temperature drift/cycle.
Using a 9 square-grid-pattern on the griddle surface, are the surface temperatures consistent (±5°F)?
Does the Griddle heat light cycle OFF/ON once the surface temperature has reached the set temperature?
Does the unit operate properly for 15 minutes after the griddle has reached operating temperature?
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 15
MODEL G2 ELECTRIC EG SERIES
TABLE TOP & STAND
INSTALLATION INSTRUCTIONS
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 16
INSTALLATION
TABLE TOP/STAND MODEL
TOOLS REQUIRED:
Spirit Level Weighted Temperature Probe
Phillips Screw Driver Digital Temperature Meter
Digital Volt Meter
Digital Clamp Amp Meter
LOCATION AND PLACEMENT
The ACCU-STEAM™ electric griddle has been
designed to be placed on a commercial kitchen
counter-top, an AccuTemp griddle stand or
directly onto any at, level surface that will
support the appliance weight.
The operating temperature ranges from 200°-
400°F (93°- 204°C). Since these temperatures
can also be found on surfaces around the
perimeter of this appliance, care should be
given not to install next to or against, objects or
surfaces with a low melting or ash point.
LEVELING
The appliance must be installed in a level
condition. An out-of-level condition may cause
uneven temperatures and in a severe out of level
condition damage to the appliance can occur.
Use a spirit level resting on the appliance cooking
surface to ensure it is level front-to-back and left-
to-right.
TABLE TOP
Install the (4) rubber foot tips provided with your
commercial appliance onto the four foot adjusters
of each of the appliance legs. This will keep the
appliance from sliding on the counter-top under
normal use. Once the rubber foot tips have been
IN-FIELD MODIFICATIONS
This appliance has a totally unique design and
is constructed unlike any other appliance on the
market today. Any modication may permanently
damage the appliance.
CAUTION
This appliance is heavy. For safe handling, the
installer should obtain help as needed or employ
appropriate material handling equipment to remove
the appliance from the skid and move into the nal
destination.
WARNING
Only a qualied service or electrician should
complete the installation to ensure that all
electrical and safety requirements are met and
that all wiring is installed as per all current
National, State and Local electrical codes.
WARNING Any in eld modications that bypasses the safety
features could result in injury or death.
WARNING
Improper installation, alteration, adjustment,
service, cleaning or maintenance of this appliance
could result in property damage, serious injury or
death.
Read and understand the installation, operational
and maintenance instructions before installing,
servicing, or operating this appliance.
WARNING
Always disconnect from power source before
cleaning or servicing.
WARNING
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702 PAGE 17
installed, adjust the four foot adjusters up or
down as needed to level the appliance side to
side and front to back.
ACCUTEMP STAND
If on an AccuTemp griddle stand with casters,
ensure that the oor surface is level and place
the two locking casters to the “on” position
and follow the leveling instructions to verify the
appliance is level.
ELECTRICAL SUPPLY
The ACCU-STEAM™ appliance has been
designed, manufactured and tested to meet or
exceed the demanding standards of safety set
forth by Underwriters Laboratories, Inc. To to
ensure that this high level of safety is maintained
in your installation, it is important that you read
and understand the following information before
attempting to plug in your griddle.
ELECTRICAL REQUIREMENTS
Electrical requirements are listed on the data
plate located on the front of the appliance. This
appliance is supplied with a 6ft (1.83m) cord and
the appropriate UL listed plug. Make sure that the
voltage at your supply receptacle is within ± 10 %
of the voltage listed on the appliance data plate.
( See Fig. 3)
Connection to any other voltage may cause
damage to components in the appliance.
The plug must be used with the appropriate
receptacle.
GROUNDING INSTRUCTIONS
Grounding provides a path for electric current
to reduce the risk of shock. This appliance is
equipped with a power cord having a grounding
conductor and a grounding plug.
ELECTRICAL CONNECTIONS
The receptacle requirements vary between
models.
• For a 240 V single-phase model, you will need
a NEMA 6-50R receptacle.
• For a 208/240V three-phase model, you will
need a NEMA 15-50R receptacle.
• For a 400V (380V-415V) 4 pole 5 wire model
you will need a IEC 60309 Device, IP44
splash proof receptacle.
• For a 440V/480V three-phase model you will
need a NEMA L16-30R receptacle.
WARNING
This appliance must be properly grounded in
accordance of all current International ,national,
state and local codes. Never remove the
ground prong of the plug.
INSTALLATION
CAUTION
Do not direct wire this appliance as it will void all warranties.
Use only the power cord and plug that is supplied with the
appliance as these are approved by Underwriters Laboratories,
Inc.
This manual suits for next models
5
Table of contents
Other Accu-Steam Griddle manuals
