Ace Bayou X Rocker User manual

1
S-355W-5-DC()
L26XW19CM4105G X ROCKER(V3)CEC4 S-355W-5-DC REV1.0 HR4040
Thank you for purchasing the X !Rocker We know
you will enjoy your X Rocker experience as much
as we do.
Get ready to experience sound as you never have!
Welcome to the world of interactive audio. With
your new X Rocker you can now not only hear your
music but actually FEEL it. Whether you are
listening to music, watching a movie, or playing a
game, you will become a part of it.
IMPORTANT: You must keep your original retail receipt as proof of purchase.
HAVE THIS ITEM NUMBER READY WHEN CONTACTING CUSTOMER SERVICE: #51475
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

2
FEATURES
A-Control Panel
A1-Bass Volume Adjustment
A2-Volume Adjustment
Jack
Switch
A3-Audio Input Jack
A4-Audio Output
A5-Wireless Band
A6-Power On/Off Switch
A7-9V DC Power Input Jack
A8-Power Indicator Light
A9-MP3 Input Jack
A10-Headphone Jack
A11-
A12-Audio Input Jack of TX
A13-PowerOn/OffSwitchofTX
A14-Wireless Band Switch of TX
DC 3V/200mA Power Input Jack of TX
A13
A12
A11
A14
AUDIO IN
OFF/ON
BAND
123…… ……
DC IN DC 3V
A9
A1 A2 A3 A4 A5
A6 A7 A10
A8
0.492ft/0.15m
B7
*SOME PARTS MAY VARY SLIGHTLY
B-Accessories Supplied
B1-3m RCA Stereo to RCA stereo plug cable(1 PC)
B2-1m 3.5mm stereo male to 3.5mm stereo male cable (1PC)
B3-RCA female to female barrel adapter (2 PCS )
B4-0.15m RCA stereo male to 3.5mm stereo male cable (1PC)
B5-0.15m 3.5mm stereo male to 3.5mm stereo male cable (1PC)
B6-INPUT:100-240V AC 50/60Hz
OUTPUT:9V DC 1000mA 9W Main POWER Adapter.
(EFFICIENCY LEVEL: 115V )
B7-TX Box
9.84ft/3m
3 28ft/1m.0.492ft/0.15m
B5
B6
B4
B2
B1
B3
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]
C-Audio Specifications
.Ⅰ
＞
＞
＜
＜
The unit specifications:
1)
2)
3)
4)
Signal-to-Noise Ratio(Amplifier):
Subwoofer: 50dB
Satellite: 60dB
Frequency Response: 60Hz~15kHz
Distortion:
Subwoofer: 4% (F=100Hz)
Satellite: 1% (F=1kHz)
Input: DC 9V/1A
Ⅱ
℃℃
＜
.TX / RX specification:
1) TX Power supply 3V DC
2XAAA Batteries (BATTERIES ARE NOT INCLUDED )
2) TX Current: 40mA
3) RX Current: 20mA
4) TX Transmission distance: < 65.6 ft / 20 meters
(No buildings or other barriers)
5) Environmental temperature:
14 F~158 F / -10 ~70
6) Modulation mode: FSK
7) TX Work frequency: 863.3, 863.9,864.55MHz
8) RX Work frequency: 863.3, 863.9,864.55MHz
9) TX Power: 10dBM
10) RX Sensitivity:-100dBM
11) RX frequency range: 50Hz~13KHz
12) Second harmonic suppression: -40dB
13) Band quantity: 3 channels
/200mA
00

FUNCTIONS:
Foldable construction for ease of storage and portability.
Side control panel with volume, bass control, and input/output jacks, and band switch.
Ergonomic design with full back support.
Easy to clean heavy duty upholstery grade vinyl cover.
Wireless audio transmission
Insert pin(J)into closureStep4:
Step1:
Place the arm bracket(H) on the right
side of the chair. Please pay careful
attention to the drawing to be sure
you have the correct arm bracket for
that side .Use 2bolts(C)with washer
(G)to fasten the arm bracket to the
side of the chair .Tighten the bolts
with the Allen wrench provided(I).
Step2: Attach the right arm to the
chairusingthepartsshowninthe
illustration. The metal sleeve will
position itself inside the arm hole and
the large washer(F)should be between
the arm and the chair. Tighten the
bolts with the Allen wrench
provided(I).
When assembled correctly the arm
should pivot freely.
Step3: Push the plastic caps(D)into
the bolts holes to finish the arm
assembly for that side. Repeat steps
1-3 for the left side of the chair.
ABCDE GF
21
HI
1
1266 261
J
1. Lift X Rocker out of box.
2. Keep the chair in the folded position and place it on the floor so that back side of the chair is facing up and
the bottom of the seat is touching the floor.
3. Review the set up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.
4. Please complete steps 1-4 to assemble the chair.
5. When used in wireless mode, make sure that the control panel is not more than 65.6ft / 20 meters from the audio source
and 6.5ft / 2 meters from a power source.
6. Unpack the power adapter and connect it to the main power outlet, then to the power jack on the control panel. (A7)
7. Press the power button (A6) and confirm that the power indicator light (A8) is on. In wireless mode, turn on the power to
the TX box (A13), confirm that its indicator light is on, and check that the band selected on the TX box (A14) is the same
as that selected on the control panel (A5) of the X Rocker.
8. Follow the connection diagrams. They show how to connect the X Rocker to the audio source of your choice .
9. Adjust the bass and volume levels to your preference---start rocking.
C
F
J
I
READ BEFORE USAGE:
Always make sure hinge is locked before moving.
Always make sure hinge is locked before sitting in the chair.
Excessive use of audio equipment could lead to hearing loss.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Children under the age of 13 should not use this product without adult supervision.
Strictly for indoor use. Do not expose to direct sunlight, moisture or extreme temperatures.
If the cover becomes wet, disconnect the power immediately and don't use until it is completely dry.
Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts you
at risk for injury or death from electrical shock.
When using in wire mode, please keep the band to "OFF" (A5).
The maximum input of the TX box is 1V. If the input is over 1V, the sound can become distorted or fuzzy. If the Sound
coming out of the chair is fuzzy at low volumes, lower the volume on the audio source (ex. The TV, Mp3,etc) and the
distortion should go away.
Do not mix alkaline, standard carbon-zinc, or rechargeable Ni-cad, NiMH, etc.
Do not mix old and new batteries.
3
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

MP3/CD/DVD/GAMES/PSP
WIRE MODE CONNECTION GUIDE
red
white
XBOX , XBOX 360 , PLAYSTATION 3 & Wii
TM TM TM
red
white
green
green
white
red
X Rocker X Rocker
XRockerXRocker
XRocker
To next chair
4
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

XBOX , XBOX 360 , PLAYSTATION 3 & Wii
TM TM TM
MP3 / CD / DVD / GAMES / PSP
WIRELESS MODE CONNECTION GUIDE
green
red
white
green
green
green
red
white
TX box TX box
TX box
XRocker
XRocker XRocker
X Rocker X Rocker
5
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

6
Wired Connection
Wireless Connection
²
B4 Mini Plug-RCA adapter to the Rocker's transmitter. Fit the RCA socket ends to the red and white audio plugs of the
component or AV cable. If they ar
Direct connection to game console
If you use HDMI cable to connect to TV
If you use component or AV cable to connect console to TV:
Plug the Red and White plugs of the console's AV cable into the B3 connectors on the Rocker's B1
cable.
Connect Rocker to one of TV's Audio Out connections. Most HD-ready TV sets have some combination of RCA, mini-plug or
optical audio interfaces enabling audio connection to accessories. Many have all three.
connection is direct to the RCA plug terminations of the Rocker's B1 cable ut make sure
you are connecting to an Audio Out pair. If your TV has only two RCA sockets and they are not
marked Audio Out, they are probably input sockets and cannot send audio information to the
Rocker.
. Mini Plug sockets are often found on the front or side of the TV set,
marked with the headset icon . Fit the RCA-to-Mini Plug adapter [B4 on instructions] to the RCA
ends of your three-meter cable [B1 on instructions], converting your three-meter cable to a mini
plug-to-mini plug connector. Plug one end into TV's headset socket and the other into Rocker's
ini Plug input socket. (This is same configuration as for MP3 and other portable/handhel devices.) NOTE: Audio out
volume through this outlet is usually separately adjustable from speaker volume. Please consult TV's user guide for how
to regulate output.
A few models of TV only have optical audio out. If you have one of these sets, you will need an optical
to cable or optical to RCA coaxial adapter, sometimes called a Toslink to RCA adapter, and some connecting cables.
There are several models of adapter available at reasonable prices from general electronic retailers and HD specialist
shops and web sites.
For direct connection to a game console, fit the mini-plug end of the
e plugged into the TV, remove them, leaving the yellow video cable in place.
Fit the Rocker's transmitter to an available audio-out on the TV, using the
appropriate connector mini-plug to mini-plug for the headset audio-out, or mini plug-to-RCA for RCA audio-out.
Connect transmitter to MP3 players or handheld games using mini plug-to-mini plug connector.
For other devices such as stereo amplifiers, locate the most suitable audio output. Connectors compatible with most
sound sources are included with your Rocker.
Fit the B3 connectors to the ends of the B1 cable
Unplug the Red and White plugs of the console's AV cable from the TV, leaving the Yellow (video)
plug in place.
,b
m d
Component or AV cables are supplied with new models of PlayStation 3, X Box Elite and Wii, as well
as earlier generation consoles.
RCA
Mini Plug connection
Optical Audio Out:
If you use the console's Component or AV cable:
If you use HDMI connection to the TV:
Other sound sources:
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

7
Most gaming consoles are shipped from the manufacturer with an Audio/ Video RCA cable. The A/V RCA cable has three RCA
plugs: a video plug (yellow) and two audio plugs (red and white). If your gaming console came with an A/V RCA cable, please
follow the instructions supplied by the game console manufacturer for setting up your gaming console and connecting it to the
television. Please note that you must leave the red and white audio jacks on the A/V cable UNCONNECTED. Once the console is
properly connected to your TV, please follow the diagram in the Rocker Set-up guide to connect the gaming
console to the X Rocker.
illustrated X
If your gaming console was shipped with a coaxial cable, instead of an A/V RCA cable, you must follow an alternate set-up
procedure (coaxial cable is the same type of cable that is used to connect a VCR to the TV). You will quickly recognize if your gaming
console uses this type of cable. It connects the gaming console directly to the television and carries both the audio and video signal
over a single cable. If your gaming console uses a coaxial cable, you CAN NOT connect it directly to the X Rocker. Instead, you must
Use an intermediary A/V device (such as a TV, VCR, DVD, TiVO, etc) Please follow these steps:
a. Connect your gaming console to the intermediary A/V device via the coaxial cable.
b. Connect the X Rocker to the 'Audio Out' jack on the intermediary A/V device.
c. Follow diagram 2 in the X Rocker Set-up guide to connect the X Rocker to the intermediary A/V device and
finalize the setup.
If your gaming console is attached to an HD TV with an HDMI cable. You will need to connect the chair using either the audio out jacks
on the back of the TV or by plugging into the headphone jack on the front of the TV.
TROUBLE SHOOTING
- Unable to connect to game console -
- Unable to hear any sound from the X Rocker -
1. Check to ensure that the power adapter is properly connected to the power jack (A7). When properly connected, the
(A8) on the control panel should light up when the power switch (A6) is turned on. If the
(A8) does not light up, try to use another power outlet in your home. When the TX box is switched on (A13) for use in
wireless mode, the power indicator light on its front panel should also light up. If the light is not on, please try changing
the batteries in the TX.
2. Make sure the power unit is turned on and indicator light on the control panel is lit.
When you use wireless mode, the power indicator light on the front panel of the TX box turns
green. If the light is not on, please turn on the power switch (A13) on the side. Check the BAND selector (A14) on the side
of the TX box and make sure the number selected is the same as the number selected on the BAND selector (A5) of the
control panel on the chair. For example, if the BAND selector on the TX box is on "1" make sure the BAND selector on the
control panel is also on "1".
3. Once you have successfully completed 1. and 2. please review the X Rocker illustrated set-up guide. Double check all audio
connections. Finally, check that the volume on the hand remote is turned to an audible level
indicator light indicator light
If it is not, please press the power
switch on the control panel.
on both the TV and the chair.
4. If you have completed 1- 3 and still do not hear sound, try connecting another audio source (CD player,
television, VCR or game console) and go through the steps again. Still not working? Help is as easy as 1,2,3:
1). Please contact Ace Bayou Europe Service Center Via email [email protected].
2). Call [phone] to request assistance.
3). Please go to for answers to frequently asked questions.
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

8
WARRANTY PAGE
Ace Bayou warrants this product (including any accessories) against defects in material and workmanship for a period of
90 days from the date of purchase. This warranty is enforceable only by the original purchaser.
ALL DAMAGED OR MISSING PARTS MUST BE REPORTED WITHIN 14 DAYS OF PURCHASE.
This warranty covers all defects in material and workmanship in this product, but DOES NOT COVER the following:
1. Damage, deterioration or malfunction resulting from:
a. Acts of God, accident, misuse, abuse, negligence, improper installation, maintenance or operation, or failure to
follow the instructions contained in this owner's manual.
b. Any damage in the shipment of the product. (Claims must be presented to the carrier.)
c. Repair, attempted repair, or modifications by anyone other than the Ace Bayou Service Center.
2. Any unit which has been modified or attempted to be modified or altered in any way whatsoever.
3. Normal wear and periodic maintenance.
4. Any unit used for industrial or commercial purposes (including rental).
5. Products sold AS IS or WITH ALL FAULTS, or consumables (such as fuses, batteries, etc)
6. Customer installation, set up adjustments, or signal reception problems.
Ace Bayou will repair or replace (at its discretion) units covered by this warranty without charge to the consumer for
labor or materials. YOU ARE RESPONSIBLE FOR INITIAL SHIPPING CHARGES. However, we will pay the return shipping
charges to any destination within the if repairs are covered by the warranty.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. ACE
BAYOU SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE LENGTH OF THIS WARRANTY.
European Union
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
DO NOT SHIP ANYTHING TO US WITHOUT CONTACTING US FIRST. DO NOT SHIP ANY PARTS OR WHOLE UNITS TO THIS
ADDRESS FOR REPAIR WITHOUT OUR PERMISSION.
Limited Warranty:
Ace Bayou EU
[phone]
Email:[email protected]
In Europe
Ace Bayou Corp
PO Box 1853
Lewisburg, TN 37091
1-866-969-2603 or 931-359-2603
Email: [email protected]
In North America
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]