Acme Furniture 02299 User manual

IMPORTANT: Do not tighten bolts completely until all
bolt are completely lined up and inserted into holes
PAGE 1 OF 8
Item No:
#02299 / 02301 / 02298
#BD00864 / BD00865
ASSEMBLY INSTRUCTIONS
*** Thank you for purchasing this quality product. Be sure to check all packing materials
carefully for small parts which may have come loose inside the carton during shipment. Identify
and count all parts and compare with parts list below.
*** Assemble product on a flat, soft surface such as a carpet or cloth to prevent scratching the
finish. Read all instruction and study the drawings carefully before starting the assembly
process.

PARTS LIST
NO. DIAGRAM PART NAME Q'Ty
HARDWARE LIST
NO. Q'Ty
1
2
3
16 pcs
PAGE 2 OF 8
Bolt: 6.3 * 80 (mm)
4
5
6
DIAGRAM PART NAME
Upper Headboard
Lower Side Rail
Guardrail Support
Completed Twin Slat (6pcs/1set)
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs
1pc
1 pc
7
A
B
C
D
E
F
G
H
I
J
K
Lower Headboard
Upper Side Rail
Long Guardrail Headboard
Short Guardrail Headboard
Guardrail Attached
1 set
Ladder step 4 pcs
Ladder side 2 pcs
8
9
10
11
Half Round Nut 16 pcs
1 pc
Bolt: 6.3 * 50 (mm)
6 pcs
Screw Bolt 7 x 100mm
2 pcs
Screw Bolt 7 x 50mm
8 pcs
Screw Bolt 7 x 35mm
4 pcs
Metal Dowel : 8.5 x 90mm
16 pcs
Wood Dowel : 10 x 40mm
30 pcs
Long screw : 4 x 35mm
2 pcs
Short screw : 4 x 20mm
1 pc
Allen key

Carton
#02299 / 02301 / 02298 /
BD00864 / BD00865
is packed in 2 cases
Part Hardware
Disignation
PAGE 3 OF 8
#02299
#02301
#02298
#BD00864-1
#BD00865-1
Lower Headboard
x 2pcs #A
#B
#E
#F
#L
#M
#N
#O
#C
#D
#G
Upper Headboard
x 2pcs
Lower Side Rail
x 2pcs
Upper Side Rail
x 2pcs
Short Guardrail
Headboard x 2pcs
Long Guardrail
Headboard x 2pcs
Guardrail Support
x 1pc
Guardrail Attached
x 1pc
Completed Twin Slat
(6pcs/1set)
Ladder side
x 2pcs
Ladder step
x 4pcs
#02299-1
#02301-1
#02298-1
#BD00864-2
#BD00865-2
HARDWARE BOX

PAGE 4 OF 8
STEP 2: CONNECT UPPER & LOWER ASEMBLY
STEP 1: LOWER (Front & Black) SIDE RAIL ASSEMBLY

PAGE 5 OF 8
STEP 3: UPPER (Front & Back) SIDE RAIL ASSEMBLY
STEP 4: COMPLETED GUARDRAIL SHORT & LONG ASSEMBLY

PAGE 6 OF 8
STEP 6: SLAT ASSEMBLY
STEP 5: GUARDRAIL SUPPORT ASSEMBLY

PAGE 7 OF 8
STEP 7: LADDER ASSEMBLY
STEP 8: LADDER ASSEMBLY

PAGE 8 OF 8
ASSEMBLY IS COMPLETED
WARNING !!!
To help prevent serious or fatal injuries from entrapment or falls:
1. Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2. Use only mattress which is 39" WIDE AND 75" LONG on upper bunk.
3. Ensure thickness of upper mattress does not exceed 6” and top surface of mattress is at least 5” below the
upper edge of guardrails.
4. Do not allow children under 6 years to use the upper bunk.
5. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free
from damage, and that all connectors are tight.
6. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7. Always use ladder for entering and leaving upper bunk.
8. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
9. Use of a night-light may provide added safety precaution for a child using the upper bunk.
10. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to a-wall, the
guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between
the bed and the wall.
11. The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD:
12. Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example,
but not limited to, hooks, belts and jump ropes.
13. Prohibit more than one person on upper bunk.
14. Maximum total weight not to exceed-150 lbs on the upper bunk, and maximum 200 lbs on lower bunk.
15. Keep these instructions for future reference.
STEP 9: