Acme Furniture BD00616 User manual

PAGE 1 OF 6
*** Thank you for purchasing this quality product. Be sure to check all packing materials
carefully for small parts which may have come loose inside the carton during shipment. Identify
and count all parts and compare with parts list below.
*** Assemble product on a flat, soft surface such as a carpet or cloth to prevent scratching the
finish. Read all instruction and study the drawings carefully before starting the assembly
process.
IMPORTANT: Do not tighten bolts completely until all
bolts are completely lined up and inserted into holes
Item No: #BD00616
ASSEMBLY INSTRUCTIONS

PAGE 2 OF 6
PARTS LISTHARDWARE LIST
NO. PART NAME Q'TyDIAGRAM NO. PART NAME Q'TyDIAGRAM
Upper Headboard (Right)
Upper Headboard (Left)
Lower Headboard (Left)
Lower Headboard (Right)
Front Post Of The Bed (Right)
Back Post Of The Bed (Right)
Front Post Of The Bed (Left)
Back Post Of The Bed (Left)
Upper Front / Back Guardrail
Bottom Rail Support
Ladder Step
Ladder Rail (Left Side)
Ladder Rail (Right Side)
1
2
3
4
5
6
7
8
9
10
11
12
13
14 Twin Slats Kit (14pcs/1set)
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pcs
1 pc
1 pc
1 pc
5 pcs
1 Sets
Bolt 6.3 x 65mm
Bolt 6.3 x 100mm
Half Round Nut 6.3 x 22 x 10mm
Wood Dowel 10 x 40 (mm)
Bolt 7 x 50mm
A
B
C
D
E
F
G
H
15 pcs
4 pcs
10 sets
12 pcs
10 pcs
28 pcs
Screw 4 x 30 (mm)
4 pcs
Bolt 6.3 x 45mm
Bolt 7 x 100mm
Allen Key (M4) 1 pc
TOOL REQUIRED:
Cross-head Screwdriver (Not provided)
3
4
1
2
5
6
7
8
9
9
10
11
12
13
14

PAGE 3 OF 6
STEP 1: RIGHT UPPER / LOWER HEADBOARDS ASSEMBLY
STEP 2:
8 pcs
5
6
3
4
A
H
A
H
A
LEFT UPPER / LOWER HEADBOARDS ASSEMBLY
A
H
1
2
8
7
A
H
8 pcs
A
AH

PAGE 4 OF 6
STEP 3:
UPPER FRONT / BACK GUARDRAIL ASSEMBLY
STEP 4:BOTTOM RAIL SUPPORT ASSEMBLY
E
DE
4 pcs
B
8 pcs
D
8 pcs
E
9
9
2 pcs
D
4 pcs
E
E
D
10
H
D
H
B
H
D

PAGE 5 OF 6
STEP 5:
STEP 6:
LADDER ASSEMBLY
12
11
13
x 10
F
H
10 pcs
F
PUT LADDER ON BED ASSEMBLY
H
C
4 pcs
C

PAGE 6 OF 6
STEP 7:
To help prevent serious or fatal injuries from entrapment or falls:
WARNING !!!
1. Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2. Use only mattress which is 39" WIDE AND 75" LONG ON UPPER BUNK.
3. Ensure thickness of upper mattress does not exceed 6” and top surface of mattress is at least 5” below the
upper edge of guardrails.
4. Do not allow children under 6 years to use the upper bunk.
5. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free
from damage, and that all connectors are tight.
6. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7. Always use ladder for entering and leaving upper bunk.
8. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
9. Use of a night-light may provide added safety precaution for a child using the upper bunk.
10. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to a-wall, the
guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between
the bed and the wall.
11. The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD:
12. Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example,
but not limited to, hooks, belts and jump ropes.
13. Prohibit more than one person on upper bunk.
14. Maximum total weight not to exceed-150 lbs on the upper bunk, and maximum 200 lbs on lower bunk.
15. Keep these instructions for future reference.
COMPLETED TWIN SLATS ASSEMBLY
G
14
28 pcsG