Acme Furniture 38180 User manual

TO OBTAIN PARTS, PLEASE CONTACT: ACME FURNITURE INC - CITY OF INDUSTRY, CA
* Use of power tool to assemble this
product will invalidate any claim and
damage this product making unsafe !!!
* Please assemble on a clean soft
surface to avoid damage.
!Tools Required
(Not included)(Not included)
10:0h10:0h
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
2- Always use the recommended size mattress or mattress supporte, or both, to help prevent the likelihood of
entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper position
free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8- Always use the ladder for entering and leaving the upper bunk.
9- Do not use substitute parts. Contact distributor or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and the wall.
12- Always use guardrails on both long sides of the upper bunk.
13- The use of water or sleep flotation mattresses is prohibited.
14- Keep these instructions for future reference.
15- Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
38180 - 38185 - LOFT BED

Part list: 38180 - 38185 - Loft Bed
4,0 x 30 Screw
Qty
35
DQty
46
E10 x 40 Wood Dowel
1/4’’
Half Moon
1/4’’
Half Moon
Qty
12
C
7,0 x 50 Screw
Ø17
Qty
08
H
Hex
Screwdriver
Hex
Screwdriver
Qty
01
F
Wooden
spacer
Wooden
spacer
Qty
02
G
1/4’’ x 100 Screw
Ø17
Qty
12
B
7,0 x 90 Screw
Ø17
AQty
25
1
2
3
6
6
7
8
9
10
11
11
12
12
13
14
14
14
15
16
16
16
x13
4
4
6
6
5
5
1
WARNING LABEL
CERTIFICATION LABEL

E
E
E
E
E
E
E
E
EE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
HOLE
HOLE
(x2)
(x2)
(x2)
(x3)
(x3)
Qty
46
E10 x 40 Wood Dowel10 x 40 Wood Dowel
7
8
9
10
11
12
14
FRONT BOTTOM SIDE RAIL
FRONT TOP SIDE RAIL
45
5
6
6

7,0 x 90 Screw
Ø17
AQty
16
03
02
A+F
A+F
A+F
A+F
A+F
A+F
A+F
A+F
B+F
B+F
B+F
B+F
B+F
B+F
F+A
F+A
F+A
F+A
F+A
F+A
F+A
F+A
F+B C
C
C
C
C
C
C
C
C
C
C
C
F+B
F+B
F+B
F+B
F+B
1
1
10
2
4
4
9
3
5
5
6
6
6
6
8
7
1
2
1
3
PLEASE ASSEMBLE ON A FLAT
SURFACE AS A TABLE OR FLOOR
Hex
Screwdriver
Hex
Screwdriver
Qty
01
F
1/4’’
Half Moon
1/4’’
Half Moon
Qty
12
CHex
Screwdriver
Hex
Screwdriver
Qty
01
F
1/4’’ x 100 Screw
Ø17
Qty
12
B
C
INSERT AND
ATTACH SCREWS (B&C),
BUT DO NOT TIGHTEN UNTIL
STEP #04
INSERT AND
ATTACH SCREWS (B&C),
BUT DO NOT TIGHTEN UNTIL
STEP #04

05
04
14
14
14
13
7,0 x 50 Screw
Ø17
Qty
03
HHex
Screwdriver
Hex
Screwdriver
Qty
01
F
Hex
Screwdriver
Hex
Screwdriver
Qty
01
F
7,0 x 90 Screw
Ø17
AQty
03
F+H
F+H
F+H
A+F
A+F
A+F
A+F
A+F
F+A
F+A
11
11
7,0 x 90 Screw
Ø17
AQty
04
AFTER ATTACHED
SCREWS ’’A’’
AT THIS TIME,
PLEASE TIGHTEN
ALL SCREWS!
AFTER ATTACHED
SCREWS ’’A’’
AT THIS TIME,
PLEASE TIGHTEN
ALL SCREWS!

07
06
The first slats must be fixed to the end of the
side rail bracket.
After fixed the first slat use the hardware letter G
to help define the space between each next slats.
Use 1-G on the left side rail and 1-G on the right side rail
=0mm
15
15
D
DDDDDDDDDDDDD
DDDDDDDDDDDDD
G
G
15 x13
4,0 x 30 Screw
Qty
26
DWooden
spacer
Wooden
spacer
Qty
02
G
12
12
7,0 x 50 Screw
Ø17
Qty
05
HHex
Screwdriver
Hex
Screwdriver
Qty
01
F
7,0 x 90 Screw
Ø17
AQty
02
F+H
F+H
F+H H+F
H+F
F+A
F+A

08
D
D
D
D
D
D
D
D
D
16
16
16
4,0 x 30 Screw
Qty
09
D