Acme Furniture 38330 User manual

Item No: 38330
PAGE 1 OF 8
ASSEMBLY INSTRUCTIONS
IMPORTANT:
Do not tighten bolts completely until all
bolts are completely lined up and inserted into holes
*** Thank you for purchasing this quality product. Be sure to check all packing materials carefully for
small parts which may have come loose inside the carton during shipment. Identify and count all parts
and compare with parts list below.
*** Assemble product on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Read all instruction and study the drawings carefully before starting the assembly process.

PARTS LIST
NO. DIAGRAM PART NAME Q'Ty
1
PAGE 2 OF 8
2
3
4
5
6
7
8
9
10
1 pc
1 pc
2 pcs
2 pcs
Long Guardrail (Back)
Completed Twin Slat (14pcs/1set)
Short Guardrail (Front)
2 sets
1 pc
2 pcs
Guardrail Support
Upper Headboard (Right)
Upper Headboard (Left)
Lower Headboard (Left)
Upper / Lower Front Rail 2 pcs
2 pcs
11
12
13
Ladder Step 4 pcs
1 pc
Ladder Rail (Left Side)
Ladder Rail (Right Side)
1 pc
1 pc
Lower Headboard (Right)
HARDWARE LIST
NO. Q'Ty
A
B
C
16 sets
Bolt: 6.3 x 100 (mm)
Half Round Nut
D
E
F
12 pcs
62 pcs
Screw 4 x 30 (mm)
1 pc
Allen Key (M4)
DIAGRAM PART NAME
6 pcs
4 pcs
G
Wood Dowel 10 x 40 (mm)
Metal Dowel 9 x 9 x 90 (mm)
Long Screw 7 x 100 (mm)
H
Short Bolt 6.3 x 35 (mm) 6 pcs
8 pcs
Bolt 7 x 50 (mm)
7
12
13
1
35
6
12
2
8
5
10
11
9
4
Upper / Lower Back Rail
Cross-head Screwdriver (Not provided)
TOOL REQUIRED:

Carton
#38330 is packed in 3 cases
Disignation Part Hardware
Item:
#38332RL
PAGE 3 OF 8
Upper Headboard(Left)
x 1pc #1
#2
#3
#4
Upper Headboard(Right)
x 1pc
Upper/Lower Front Rail
x 2pcs
Upper/Lower Back Rail
x 2pcs
Long Guardrail(Back)
x 2pcs
Short Guardrail(Front)
x 2pcs
Ladder Rail(Right Side)
x 1pc
Ladder Rail(Left Side)
x 1pc
Guardrail Support
x 2pcs
Completed Twin Slat
(14pcs/1set) x 2sets
A: Bolt x16pcs
Half Round Nut x16pcs
D: Metal x4pcs
B: Long Screw x6pcs
H: Allen Key x1pc
F: Screw x62pcs
Lower Headboard(Left)
x 1pc
Lower Headboard(Right)
x 1pc
Item:
#38331BASE
Item:
#38330TOP
#5
#6
#7
#8
#9
#10
#11
#12
Ladder Step
x 4pcs
#13
C: Bolt 7x50mm x8pcs
E: Wood Dowel x 12pcs
G: Short Bolt x 6pcs

PAGE 4 OF 8
STEP 1: UPPER HEADBOARDS ASSEMBLY
STEP 2: GUARDRAILS ASSEMBLY
A8 sets
B6 pcs
E12 pcs
7
8
HA
6
A
6
5
1
2
x4
H
B
E
x6

PAGE 5 OF 8
STEP 3: GUARDRAIL SUPPORTS ASSEMBLY
STEP 4: LOWER HEADBOARD ASSEMBLY
12
F
F6 pcs
12
12
x2
6
5
3
4
A8 sets
HA
6
A
x4

PAGE 6 OF 8
STEP 5: UPPER / LOWER BED ASSEMBLY
STEP 6: LADDER ASSEMBLY
D4 pcs
D
HC
9
10
11
x8
C8 pcs

PAGE 7 OF 8
STEP 7: LADDER ASSEMBLY
STEP 8: COMPLETED TWIN SLATS ASSEMBLY
G6pcs
G
F
F56 pcs
13
13
H

PAGE 8 OF 8
STEP 9:
ASSEMBLY IS COMPLETED
To help prevent serious or fatal injuries from entrapment or falls:
1. Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2. Use only mattress which is 39" WIDE AND 75" LONG ON UPPER BUNK.
3. Ensure thickness of upper mattress does not exceed 6” and top surface of mattress is at least 5” below the
upper edge of guardrails.
4. Do not allow children under 6 years to use the upper bunk.
5. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free
from damage, and that all connectors are tight.
6. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7. Always use ladder for entering and leaving upper bunk.
8. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
9. Use of a night-light may provide added safety precaution for a child using the upper bunk.
10. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to a-wall, the
guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between
the bed and the wall.
11. The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD:
12. Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example,
but not limited to, hooks, belts and jump ropes.
13. Prohibit more than one person on upper bunk.
14. Maximum total weight not to exceed-150 lbs on the upper bunk, and maximum 200 lbs on lower bunk.
15. Keep these instructions for future reference.
WARNING !!!