Acme Furniture HALL TREE 97791 User manual

HALL TREE
Width - 29.92"
Depth - 15.55"
Height - 75.67"
DIMENSIONS
MODEL#97791
ASSEMBLY INSTRUCTION FOR ACME FURNITURE
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled.***

97791
PARTS LIST
X1 Top
A
X1 Right side
B
X1 Middle
C
X1 Left back
D
X1 Middle top
E
X1 Left side
F
X1 Bottom
G
X1 Drawer Left
H
X1 Drawer Right
I
X1 Drawer back
J
X1 Drawer head
K
X1 Drawer support
L
X3 Fixed layer
M
X1 Door
O
X1 Right back
P
X1 Drawer bottom
R
X4 Foot
S
X1 Bottom back
Q
X1 Iron tube
T
X6 Active layer
N

HARDWARE LIST
Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled.
Carefully check parts and packing materials prior to ordering replacements.
Attention
X25
2Cam lock 15*12mm
1X25 Cam bolt 7*35*12.5mm
X24
3Dowel 8*30mm
4X4 Wood screw 8#*1-1/4"
X9
5Coarse screw 7*11*50mm
6X2 Slide rail 17*310mm
7X4 Wood screw #6*1/2"
X2
8Fixing screw M4*12mm
X24
9Shelf pin 4.9*16mm
X2
10 Handle
X3
12 Hinge ø26mm*3/8
X12
13 Hinge screw 6#*1/2"
X8
14 Fixative plate
X8
15 Wood screw 3*19mm
X2
16 Bolt 2*25mm
X1
17 Coat rod
X4
18 Wood screw 3*12mm
X16
19 T-head screw 4*12mm
X4
20 Pipe plug
X4
11 Handle screw M4*19mm

HARDWARE LIST
Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled.
Carefully check parts and packing materials prior to ordering replacements.
Attention
X4
21 Adjustable leveler 24mm*1/4*12mm
X1
23 Wall mounted strap 25*152mm
X1
22 Vent cap 60mm*66mm*3mm
X1
28 Allen wrench
X1
27 Glue
X1
26 Wood screw 8#*1"
X1
25 Wall anchor 1-1/8"
X1
24 Wood screw 4*16mm

ASSEMBLY INSTRUCTIONS
1
Step 1.
6
7
2nd Hole
Push runner to see screw
holes on the other end.
Screw Hole
27
3
F
3
B
1
hole usage
13 X3
O
12
10
11

Step 2.
2
ASSEMBLY INSTRUCTIONS
27
3
180°
18
17
D
C
C
3
1

Step 3.
3
ASSEMBLY INSTRUCTIONS
180°
27
3
E
E
3
1
A
X3
M

Step 4.
4
ASSEMBLY INSTRUCTIONS
Insert in as arrow
direction to specify
3
J
H
I
1K
L
27
3
2
H
I
K
L4
J
H
I
L
10
11 K

Step 5.
5
ASSEMBLY INSTRUCTIONS
2
2B
M
M
MFinished side
C
D
E
5
C
D

Step 6.
6
ASSEMBLY INSTRUCTIONS
P
22
2
2
BM
E
M
M
D

Step 7.
7
ASSEMBLY INSTRUCTIONS
2
2
A
P
D
18
17
A
B
C

Step 8.
8
ASSEMBLY INSTRUCTIONS
2
216
B
FE
T
5
B
FG
Q

Step 9.
9
ASSEMBLY INSTRUCTIONS
X4
19
X4
20
S
21
G

Step 10.
10
ASSEMBLY INSTRUCTIONS
hole usage
13
X3
O
N
N
N
N
N
NX24
9

Step 11.
11
ASSEMBLY INSTRUCTIONS
Extend the two outer slides of the
runners so that they could align
with the sides of the drawer. Make
sure the pre-drilled holes from the
drawer align with the screw holes
of the outer slides.
Secure two screws from the inside
of the drawer using a Phillips
screwdriver to tighten them to the
outer slides.
X8
15
14
8
K
P
Q

Step 12.
12
ASSEMBLY IS COMPLETED.
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
ASSEMBLY INSTRUCTIONS
For safety,please use the strap
to secure the uniton the wall.
Wall
23
24 25
26