Acme Furniture Scaola 92655 User manual

ITEM NO. 92655 BOOKSHELF
A
B
C
D
UPPER PANEL
2PCS
UNDER LEFT PANEL
1PC
UNDER RIGHT PANEL
1PC
CONNECT FRAME
2PCS
E
F
G
H
MIDDLE FRAME
2PCS
STRETCHER
4PCS
STRETCHER
2PCS
STRETCHER
2PCS
I
J
K
L
STRETCHER
6PCS
WOOD SHELF
1200 x 400mm
2PCS
WOOD SHELF
600 x 400mm
1PC
WOOD SHELF
564 x 400mm
1PC
M
N
O
P
WOOD SHELF
500 x 400mm
1PC
WOOD SHELF
400 x 400mm
1PC
WOOD SHELF
364 x 400mm
1PC
WOOD SHELF
300 x 400mm
3PCS
ASSEMBLY INSTRUCTIONS

1
2
3
4
BOLT 1/4" X 1-1/2"
16PCS
BOLT 1/4" X 1/2"
2PCS
BOLT 1/4" X 2"
16PCS
SHAFT SLEEVES
2PCS
5
6
7
8
BOLT COVER
20PCS
END CAP
8PCS
L BRACKET
2PCS
WALL ANCHOR
2PCS
9
10
11
SCREW
46PCS
PLASTIC STRAP
2PCS
ALLEN KEY
1PC
*** Do not tighten screws & bolts until the entire unit is completely assembled. ***
STEP 1
Insert end cap (6) to the top
of upper panel (A), then
attach stretcher (F) and
connect frame (D) to upper
panel (A) using bolts (1) and
allen key (11) as shown.

STEP 2
Insert end cap (6) to the
bottom of under left panel
(B) and under right panel
(C), then attach under left
panel (B) to upper panel (A)
using bolt (2) and shaft
sleeves (4).
Attach under right panel (C)
to upper panel (A), attach
stretcher (G) to under right
panel (C) and upper panel
(A) using bolts (1) and allen
key (11).
Attach stretcher (H) to
under left panel (B) and
attach stretcher (F) to under
left panel (B) and under
right panel (C) using bolts
(1) and allen key (11) as
shown.
STEP 3
Attach middle frame (E) to
stretcher (H) and stretcher
(G) using bolts (3) and allen
key (11) as shown.
B
C
A
A
G
H

STEP 4
Attach stretcher (I) through
the wood shelf (J) and wood
shelf (K) to stretcher (F) and
connect frame (D) using
bolts (3) and allen key (11).
Attach wood shelf (J) and
wood shelf (K) to
assembled bookshelf using
screw (9) as shown.
STEP 5
Attach wood shelf (P) to
assembled bookshelf using
screw (9) as shown.

STEP 6
Attach stretcher (I) through
the wood shelf (N) to
connect frame (D) and
middle frame (E) using bolts
(3) and allen key (11).
Attach wood shelf (L) and
wood shelf (N) to
assembled bookshelf using
screw (9) as shown.
STEP 7
Attach wood shelf (M) and
wood shelf (P) to
assembled bookshelf using
screw (9) as shown.

STEP 8
Attach stretcher (I) through
the wood shelf (J) to middle
frame (E) and stretcher (F)
using bolts (3) and allen key
(11).
Attach wood shelf (O) and
wood shelf (J) to assembled
bookshelf using screw (9)
as shown.
STEP 9
Cover the bolt head using
bolt cover (5) as shown.

STEP 10
Select a location where you
want the bookshelf
mounted. Mark on the wall
the two locations where the
wall anchors (8) will be
placed. Drill a hole for each
anchor slightly smaller than
the size of screws (9). Push
the wall anchors (8) as far
as it will go with your finger.
Tap gently with a hammer
until the anchors are in.
Then align the L brackets
(7) to the wall anchors (8)
and insert screws (9) to
secure.
STEP 11
Insert each end of the
plastic strap (10) into L
brackets (7), then secure
and tighten.
Wall