Acme Furniture 72590 User manual

ITEM NO. 72590 COUNTER HIGH TABLE
1
2
3
STRETCHER # 1
2PCS
STRETCHER # 2
12PCS
STRETCHER # 3
2PCS
4
5
LONG BOLT
4PCS
GLASS TOP
1PC
A
B
C
BOLT 3/16”X 3/8”
28PCS
LEVELER
4PCS
NUT
4PCS
D
E
F
FLAT WASHER
4PCS
ALLEN KEY
1PC
OPEN WRENCH
1PC
ASSEMBLY INSTRUCTIONS
STOPPER

*** Do not tighten screws & bolts until the entire unit is completely assembled. ***
STEP 1
*Please put all parts on a soft
surface to prevent scratches.
Screw long bolts (4) into the
corresponding holes on the
glass top (5) as shown and
tighten it.
STEP 2
Insert attached long bolts (4)
through the corresponding
holes on stretchers (1) as
shown.
STOPPER

STEP 3
Insert attached long bolts (4)
through the corresponding
holes on stretchers (2) as
shown and fix stretchers (2) to
stretchers (1) by using bolts
(A) as shown.
Then following with next
stretchers (2) one by one.
*Do not tighten the bolts until
the frame is built up.
STEP 4
*Repeat STEP 3; insert all
stretchers (2) to build up the
frame as shown.

STEP 5
Attach stretchers (3) to
stretchers (2) by using bolt (A)
as shown then tighten all bolts
firmly.
Fix the frame firmly by using
nuts (C) and flat washers (D)
with open wrench (F) as
shown.
Attach levelers (B) to the
bottom of stretchers (3) then
turn the assembled unit right
side up carefully.
Your counter high table is now
complete.
C
F